New Block Casting 350CI Cruiser Crate Engine | Longblock | Aluminum Heads | Roller Cam | Fuel Injected | Deluxe Dressed w/ Pulleys - Black
This engine will be dyno tested before it ships to you at no additional charge (others charge $500)!
Part #: BP350CTFK
Description:
- HP & Torque: 341 HP / 371 FT LBS
Compression Ratio: 9.2:1
Aluminum Heads
Hydraulic Roller Cam
Cast Iron Crankshaft
Hypereutectic Pistons
Block:
- NEW BluePrint Cast Iron Block
Manufactured and Machined in the USA!
4-Bolt Main
4.000" Bore
1-Piece Rear Main Seal
Mech fuel pump provision: Yes
Passenger Side Dipstick - Drilled and tapped for clutch linkage
Rotating Assembly:
-
Cast Iron Crankshaft
3.480" Stroke
Forged 5.700" connecting rods
Hypereutectic pistons
Internal Front/ External Rear engine balance
Cylinder Heads:
- BluePrint Aluminum Cylinder Heads - H8002K
64cc chamber
2.02" intake/1.60" exhaust valves
195cc intake/75cc exhaust runners
Cam Specs:
- Cam Type: Roller
.477 Intake .471 Exhaust
202 Intake / 212 Exhaust duration
@ .050 - 115 degree lobe separation
Ignition Timing:
- 32 Degrees Total at 3500 RPM
Also Includes:
- Valve covers
Oil pan
Timing cover -
Aluminum intake
HEI distributor - Spark plugs and wires
EFI System
- Waterneck and Thermostat
- Dyno test results shipped with engine
- Front Accessory Drive with Water Pump, A/C Compressor, Alternator, and Power Steering Pump (Does not fit Corvette)
Warranty:
- 30 month / 50,000 mile
Notes:
- This engine is an excellent cruiser and daily driver engine. This engine makes up to 18 inches of vacuum, and is designed to work excellent with power brakes, stock torque converter, stock gearing, and run on 87 octane fuel
- The performance aluminum cylinder heads on this engine feature a .500 raised port vs OEM.
This engine will be dyno tested before it ships to you at no additional charge (others charge $500)!
Part #: BP350CTFK
Description:
- HP & Torque: 341 HP / 371 FT LBS
Compression Ratio: 9.2:1
Aluminum Heads
Hydraulic Roller Cam
Cast Iron Crankshaft
Hypereutectic Pistons
Block:
- NEW BluePrint Cast Iron Block
Manufactured and Machined in the USA!
4-Bolt Main
4.000" Bore
1-Piece Rear Main Seal
Mech fuel pump provision: Yes
Passenger Side Dipstick - Drilled and tapped for clutch linkage
Rotating Assembly:
-
Cast Iron Crankshaft
3.480" Stroke
Forged 5.700" connecting rods
Hypereutectic pistons
Internal Front/ External Rear engine balance
Cylinder Heads:
- BluePrint Aluminum Cylinder Heads - H8002K
64cc chamber
2.02" intake/1.60" exhaust valves
195cc intake/75cc exhaust runners
Cam Specs:
- Cam Type: Roller
.477 Intake .471 Exhaust
202 Intake / 212 Exhaust duration
@ .050 - 115 degree lobe separation
Ignition Timing:
- 32 Degrees Total at 3500 RPM
Also Includes:
- Valve covers
Oil pan
Timing cover -
Aluminum intake
HEI distributor - Spark plugs and wires
EFI System
- Waterneck and Thermostat
- Dyno test results shipped with engine
- Front Accessory Drive with Water Pump, A/C Compressor, Alternator, and Power Steering Pump (Does not fit Corvette)
Warranty:
- 30 month / 50,000 mile
Notes:
- This engine is an excellent cruiser and daily driver engine. This engine makes up to 18 inches of vacuum, and is designed to work excellent with power brakes, stock torque converter, stock gearing, and run on 87 octane fuel
- The performance aluminum cylinder heads on this engine feature a .500 raised port vs OEM.
Customer Reviews
Your BluePrint engine was dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet.
Part Number: BP350CTFK
Fuel Delivery Type: EFI
Spark Plug: BPP7938 NGK 7938 BKR5E
Spark Plug Gap: .035"
Harmonic Balancer: Recommend BPP350 - Non Weighted, 8" diameter
Flexplate/Flywheel: Recommend Late 350 Weighted BPP871006
Stall Converter: Stock
Intake Manifold: Dual plane, aluminum BPP350VINT
Fuel Recommendation: 87 Octane
Timing (Initial/Total Advance): Initial timing - 10-16° and Total timing 32°
Firing Order: 1,8,4,3,6,5,7,2
Recommended Break in Oil : BPP710 (Click Here)
Recommended Service Oil : BPP10W30 (Click Here)
Recommended Oil Filter ; BPP51061 (Click Here)
Total Oil capacity with production oil pan, and Correct BPP51061 Filter : 5 Quarts
Header Partners: HUSLER 770-664-8880 Sanderson 650-583-4590 Lemons 805-239-8998
Click here for more Header Info.
Click here to download a copy of the Installation Guide that came with your BluePrint engine.