Overview:
The BluePrint Engines GM LS-Compatible 376 C.I. Pro Series Engine is a supercharged powerhouse, producing 700 horsepower and 640 ft-lbs of torque. Based on the highly popular LS platform—ideal for street cars and restomods. It features BluePrint LS3 aluminum cylinder heads, a 9.5:1 compression ratio, and a high-performance hydraulic roller cam (.612/.585 lift, 225/238 duration @ .050, 113° LSA). Forged pistons, a nodular iron crank with a 3.622" stroke, and 6.125" forged rods ensure strength under boost from the Magnuson TVS2650 supercharger. A Holley Terminator X Max ECU and harness (550-931) rounds out this plug-and-play EFI system, delivering precision control and street-ready performance right out of the crate.
Description:
- Horsepower & Torque: 700 Horsepower / 640 FT LBS
- Compression Ratio: 9.5:1
- BluePrint Engines LS3 Aluminum Heads
- BluePrint Engines Hydraulic Roller Cam
- BluePrint Engines Forged Pistons
- Nodular Iron Crankshaft
Block:
- BluePrint Engines High Strength (LSX Style) Cast Iron Block
- Increased Deck Thickness and Strength Webbing
- Utilizes OEM LS3 Front and Rear Covers
- Improved Water Jacket Design
- Extended Cylinder Skirt
- 1-Piece Rear Main Sea
- Priority Main Oiling
- 4.070" Bore
- 6-Bolt Main
Rotating Assembly:
- Nodular Iron Crankshaft
- 3.622" Stroke
- 6.125" Connecting Rods w/ 150,000 PSI Bolts
- Forged Pistons
- Internally Balanced Front and Rear
Cylinder Heads:
- BluePrint Aluminum Cylinder Heads - PS8015
- 70cc Chamber
- 2.165" Intake / 1.600" Exhaust Valves
- 259cc Intake / 102cc Exhaust Runners
Cam Specs:
- Hydraulic Roller Cam
- .612 Intake / .585 Exhaust Lift
- 225 Intake / 238 Exhaust Duration
- @.050-113 Degree Lobe Separation
Also Includes:
- Holley Terminator X Max - Gen IV Complete ECU/Harness EFI System (550-931)
- Low Profile Rear Sump Oil Pan - BPP81073
- All Sensors Required for Engine to Run
- DBW Throttle Body - BPP12191019
- Magnuson TVS2650 Supercharger
- Water Pump - BPPLS126WP
- Spark Plugs & Wires
- Harmonic Balancer
- Timing Cover
- Valve Covers
- Coil Packs
Notes:
- Not for use in pollution-controlled vehicles.
- BluePrint Engines Recommends Air Intake Kit BPPLS01013 to ensure correct MAF calculations and Dyno calibration are maintained with the above ECU / tuning.