- HP & Torque: 540 HP / 535 FT LBS
- Compression Ratio: 10.0:1
- Aluminum Heads
- Hydraulic Roller Cam
- Forged Crank
- Forged Pistons
- NEW BluePrint Cast Iron Block
- Manufactured and Machined in the USA!
- 4-Bolt Main
- 4.125" Bore
- 2-Piece Rear Main Seal
- Mech fuel pump provision: Yes
- Passenger Side Dipstick
- Drilled and tapped for clutch linkage
- New BluePrint Forged Crankshaft
- 4.000" Stroke
- Forged 6.000" connecting rods
- Forged Pistons
- Internal Front/ Internal Rear
- BluePrint Aluminum Cylinder Heads - HP8103
- 64cc chamber
- 2.08" intake/1.60" exhaust valves
- 220cc intake/67cc exhaust runners
- Cam Type: Roller
- .577 Intake .577 Exhaust
- 240 Intake / 248 Exhaust duration
- @ .050 - 112-degree lobe separation
- Initial timing - 10-16° and Total timing 32-34°
- Satin Aluminum Intake Manifold
- Complete EFI System
- Valve covers, oil pan and timing cover
- Spark plugs & wires
- Thermostat and thermostat housing
- Installed complete front accessory drive with A/C and P/S
- EFI Fuel Pump Kit
Assembled with Complete 700R4 Automatic Transmission Package:
- 700R4 Complete Package
- 2200-2400 Stall Torque converter
- Flex plate
- Not for use in pollution-controlled vehicles.
- Due to numerous tire/rear gear combinations, This transmission does NOT ship with a speedometer gear, or sender housing.
- The performance aluminum cylinder heads on this engine feature a .500 raised port vs OEM.
Engine Accessory Specifications
BETTER THAN THE REST.
The satisfaction of our customers is our highest priority at BluePrint Engines. We use quality components to balance your engine's rotating assembly within two grams of spec. We dyno test your crate engine and certify that it's ready to deliver horsepower and torque.
We give your BluePrint engine the industry's best-in-class warranty for 30-months / 50,000 miles — with the extra confidence only BluePrint can provide. Our warranty applies to individual or professional installations and is fully transferable.
For a detailed overview of our warranty, click here.
IT ALL COMES DOWN TO RESULTS.
We make sure we hit our target horsepower and proper torque with every crate engine. We use an advanced computerized balancer to get our rotating assemblies within two grams, ensuring silky smooth power over the entire RPM range. That's precisely why our engines sound and run better than our competitors.
BRAGGING RIGHTS INCLUDED!
A comprehensive, dyno-generated printout showing these critical specs will accompany your delivered engine. No more guessing or wondering what your installed engine's real-world peak horsepower and torque ratings actually are. Any doubters in the crowd? Simply flash 'em your dyno results!
This engine will be dyno tested before it ships to you at no additional charge (others charge $500)!