We are experiencing longer than normal build times due to parts and shipping delays, please contact us through live chat for accurate lead times.

BluePrint Engines Builder Series 400CI Stroker Crate Engine and TKX Manual Trans Package | Small Block GM Style | Dressed Longblock with Fuel Injection | Aluminum Heads | Roller Cam

$16,365.00

This engine will be dyno tested before it ships to you at no additional charge (others charge $500)!
Part #: B400FKTKX

Description

Dyno Tested Warranty
  • HP & Torque: 508 HP / 473 FT LBS
    Compression Ratio: 10.3:1
    Aluminum Heads
    Hydraulic Roller Cam
    Forged Crank
    Forged Pistons

Block:

  • NEW BluePrint Cast Iron Block
    Manufactured and Machined in the USA!
    4-Bolt Main
    4.125" Bore
    1-Piece Rear Main Seal
    Mech fuel pump provision: Yes
    Passenger Side Dipstick
  • Drilled and tapped for clutch linkage

Rotating Assembly:

  • New BluePrint Forged Crankshaft
    3.750" Stroke
    OEM type 5.700" connecting rods w/ 150,000 psi bolts
    Forged Pistons
    Internal Front/ External Rear

Cylinder Heads:

  • BluePrint Aluminum Cylinder Heads - HP8103
    64cc chamber
    2.08" intake/1.60" exhaust valves
    220cc intake/67cc exhaust runners

Cam Specs:

  • Cam Type: Roller
    .555 Intake .576 Exhaust
    236 Intake / 242 Exhaust duration
    @ .050 - 110 ° lobe separation

    Ignition Timing:

    • 10-16° initial and total timing 32-34° at 3500 RPM

    Also Includes:

    • Intake Manifold dual plane, satin aluminum
      Complete EFI system
      Valve covers, oil pan and timing cover
      Dyno test results shipped with engine
    • EFI Fuel Pump kit
    • Spark plugs & wires
    • 180 degree Thermostat & housing
      Oil filter
      Plug wire separators
    • complete front accessory drive with A/C and P/S

    ASSEMBLED W/ COMPLETE TKX TRANS PACKAGE:

    Mcleod Super Street Pro single disk clutch
    Hydraulic throw out bearing
    Bell housing
    Billet flywheel
    Starter

    First Gear Ratio: 2.87:1
    Second Gear Ratio: 1.89:1
    Third Gear Ratio: 1.28:1
    Fourth Gear Ratio: 1.00:1
    Fifth Gear Ratio: 0.81:1

    Warranty:

    • 30 month / 50,000 mile

    Notes:

    • NEW BluePrint block manufactured and machined in the USA!
    • Package Ships assembled as pictured. 
    • IF THIS IS BEING ORDERED FOR A FACTORY FIVE VEHICLE,
      STOP AND CALL US AT 1-800-483-4263 FOR PROPER FITMENT
      OR VISIT FACTORYFIVEENGINES.COM
    This engine will be dyno tested before it ships to you at no additional charge (others charge $500)!
    Part #: B400FKTKX

    Description

    Dyno Tested Warranty
    • HP & Torque: 508 HP / 473 FT LBS
      Compression Ratio: 10.3:1
      Aluminum Heads
      Hydraulic Roller Cam
      Forged Crank
      Forged Pistons

    Block:

    • NEW BluePrint Cast Iron Block
      Manufactured and Machined in the USA!
      4-Bolt Main
      4.125" Bore
      1-Piece Rear Main Seal
      Mech fuel pump provision: Yes
      Passenger Side Dipstick
    • Drilled and tapped for clutch linkage

    Rotating Assembly:

    • New BluePrint Forged Crankshaft
      3.750" Stroke
      OEM type 5.700" connecting rods w/ 150,000 psi bolts
      Forged Pistons
      Internal Front/ External Rear

    Cylinder Heads:

    • BluePrint Aluminum Cylinder Heads - HP8103
      64cc chamber
      2.08" intake/1.60" exhaust valves
      220cc intake/67cc exhaust runners

    Cam Specs:

    • Cam Type: Roller
      .555 Intake .576 Exhaust
      236 Intake / 242 Exhaust duration
      @ .050 - 110 ° lobe separation

      Ignition Timing:

      • 10-16° initial and total timing 32-34° at 3500 RPM

      Also Includes:

      • Intake Manifold dual plane, satin aluminum
        Complete EFI system
        Valve covers, oil pan and timing cover
        Dyno test results shipped with engine
      • EFI Fuel Pump kit
      • Spark plugs & wires
      • 180 degree Thermostat & housing
        Oil filter
        Plug wire separators
      • complete front accessory drive with A/C and P/S

      ASSEMBLED W/ COMPLETE TKX TRANS PACKAGE:

      Mcleod Super Street Pro single disk clutch
      Hydraulic throw out bearing
      Bell housing
      Billet flywheel
      Starter

      First Gear Ratio: 2.87:1
      Second Gear Ratio: 1.89:1
      Third Gear Ratio: 1.28:1
      Fourth Gear Ratio: 1.00:1
      Fifth Gear Ratio: 0.81:1

      Warranty:

      • 30 month / 50,000 mile

      Notes:

      • NEW BluePrint block manufactured and machined in the USA!
      • Package Ships assembled as pictured. 
      • IF THIS IS BEING ORDERED FOR A FACTORY FIVE VEHICLE,
        STOP AND CALL US AT 1-800-483-4263 FOR PROPER FITMENT
        OR VISIT FACTORYFIVEENGINES.COM

      Your BluePrint engine was dyno tested with the parts and specifications listed below.  If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet.

       

      Part Number: B400FKTKO

      Fuel Delivery Type: EFI

      Spark Plug: BPP7938 NGK 7938 BKR5E

      Spark Plug Gap: .035"

      Harmonic Balancer: BPP350 - Non Weighted, 8" diameter

      Flexplate/Flywheel: Weighted, 1 pc RMS

      Stall Converter: 2400+

      Intake Manifold: Dual plane, satin aluminum

      Fuel Recommendation: 91 Octane

      Timing (Initial/Total Advance): Initial timing - 10-16° and Total timing 32-34°

      Firing Order: 1,8,4,3,6,5,7,2

      Notes: Recommended break in oil for your BluePrint Crate Engine:BPP710, Not for EGR

       

      Click here to download a copy of the Installation Guide that came with your BluePrint engine.

      Check Out This Product and More On Our Pinterest Page