BluePrint Engines 408CI Stroker Crate Engine | Small Block Chrysler Style | Dressed Longblock with Carburetor | Iron Heads | Flat Tappet Cam

$5,999.00
This engine will be dyno tested before it ships to you at no additional charge (others charge $500)!
Part #: BPC4082CTC

Description

Dyno Tested Warranty
  • HP & Torque: HP 375 / 460 FT LBS
    Compression Ratio: 9.8:1
    Cast Iron Heads
    Flat Tappet Cam
    Cast Steel Crank
    Forged Pistons

Block:

  • Hand picked seasoned block
    Square and parallel decked
    Align honed main bearing bore
    Cylinders honed on computer controlled machine to within .0002 straightness and roundness
    Cylinders are sonic tested for thickness
    2-Bolt Main
    4.000" Bored .040" over
    2-Piece Rear Main Seal
    Mech fuel pump provision: Yes

Rotating Assembly:

  • New Cast steel crankshaft
    4.000" Stroke
    OEM type 6.123" connecting rods w/ 150,000 psi bolts
    Forged pistons
    External

Cylinder Heads:

  • Magnum cast iron heads
    Hardened retainers and springs
    1.92" swirl polished intake valves
    1.625" swirl polished exhaust valves
    Hardened push rods

Cam Specs:

  • Cam Type: Flat Tappet
    .474 Intake .474 Exhaust
    238 Intake / 238 Exhaust duration
    @ .050 - 110 degree lobe separation

Ignition Timing:

  • 34 degrees total at 3500 RPM

Also Includes:

  • Valve covers, oil pan and timing cover
    Brass freeze plugs
    Dyno tested and shipped with results

Warranty:

  • 30 month / 50,000 mile

Notes:

  • Not for use in pollution controlled vehicles.

Yellow Exclamation Triangle WARNING: Cancer and Reproductive Harm-
www.P65Warnings.ca.gov

This engine will be dyno tested before it ships to you at no additional charge (others charge $500)!
Part #: BPC4082CTC

Description

Dyno Tested Warranty
  • HP & Torque: HP 375 / 460 FT LBS
    Compression Ratio: 9.8:1
    Cast Iron Heads
    Flat Tappet Cam
    Cast Steel Crank
    Forged Pistons

Block:

  • Hand picked seasoned block
    Square and parallel decked
    Align honed main bearing bore
    Cylinders honed on computer controlled machine to within .0002 straightness and roundness
    Cylinders are sonic tested for thickness
    2-Bolt Main
    4.000" Bored .040" over
    2-Piece Rear Main Seal
    Mech fuel pump provision: Yes

Rotating Assembly:

  • New Cast steel crankshaft
    4.000" Stroke
    OEM type 6.123" connecting rods w/ 150,000 psi bolts
    Forged pistons
    External

Cylinder Heads:

  • Magnum cast iron heads
    Hardened retainers and springs
    1.92" swirl polished intake valves
    1.625" swirl polished exhaust valves
    Hardened push rods

Cam Specs:

  • Cam Type: Flat Tappet
    .474 Intake .474 Exhaust
    238 Intake / 238 Exhaust duration
    @ .050 - 110 degree lobe separation

Ignition Timing:

  • 34 degrees total at 3500 RPM

Also Includes:

  • Valve covers, oil pan and timing cover
    Brass freeze plugs
    Dyno tested and shipped with results

Warranty:

  • 30 month / 50,000 mile

Notes:

  • Not for use in pollution controlled vehicles.

Yellow Exclamation Triangle WARNING: Cancer and Reproductive Harm-
www.P65Warnings.ca.gov

Your BluePrint engine was dyno tested with the parts and specifications listed below.  If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet.

 

Part Number: BPC4082CTC

Fuel Delivery Type: Carbureted, 750cfm, manual choke

Spark Plug: Champion 792

Spark Plug Gap: .045"

Harmonic Balancer: 360 EXTERNALLY BALANCED '93-'97, 7.25" Diameter

Flexplate/Flywheel: Pre-Magnum, Weighed 360

Stall Converter: 1800-2200 rpm

Intake Manifold: Dual plane, satin aluminum

Fuel Recommendation: 91 Octane

Timing (Initial/Total Advance): Initial timing - 10-16° and Total timing 32-34°

Firing Order: 1,8,4,3,6,5,7,2

Notes: Recommended break in oil for your BluePrint Crate Engine:BPP710, Not for EGR

 

Click here to download a copy of the Installation Guide that came with your BluePrint engine.

Check Out This Product and More On Our Pinterest Page