632 CI ProSeries Stroker Crate Engine | Big Block GM Style | 10.3L | Fuel Injected | Deluxe Dressed w/ Pulleys - Black
This engine will be dyno tested before it ships to you at no additional charge (others charge $500)!
Part Number: PS6320CTFKB
Description
- HP & Torque: 815 HP / 775 FT LBS
Compression Ratio: 11.0:1
Aluminum Heads
Hydraulic Roller Cam
Forged Crank
Forged Pistons
Block:
- NEW BluePrint Cast Iron Block
- Manufactured and Machined in the USA!
- 4-Bolt Main
- 4.600" Bore
- 1-Piece Rear Main Seal
- Mech fuel pump provision: Yes
- Tall Deck (Cyl Deck is Approx .400 taller / wider than oem block)
Rotating Assembly:
- New BluePrint Forged Crankshaft
4.750" Stroke
Forged H-beam 6.635" connecting rods
Forged Pistons
Internal
Cylinder Heads:
- BluePrint Aluminum Cylinder Heads -PS8012
- 119cc chamber
- 2.30" intake/1.88" exhaust valves
- 358cc intake/125cc exhaust runners
- Cylinder heads feature a .300 in. raised exhaust port vs an OEM casting.
- Must verify clearance of exhaust,shift linkage, steering components etc. before ordering.
Cam Specs:
- Cam Type: Roller
.698 / .698 Lift
272 / 282 duration @ .050 - 110 degree LSA
Also Includes:
- Holley Sniper EFI
- Valve covers, oil pan and timing cover
- Harmonic balancer
- Intake Manifold
- Pro Billet Distributor
Dyno test results shipped with engine - Installed Complete Black Front accessory drive with alternator, P/S, A/C, WP, all pulleys and belts.
Warranty:
30 month / 50,000 mile
Notes:
- Not for use in pollution controlled vehicles.
- This engine features .300 raised exhaust ports and .400 deck height increase over OEM.
- Must verify clearance of exhaust, shift linkage, steering components etc. before ordering.
This engine will be dyno tested before it ships to you at no additional charge (others charge $500)!
Part Number: PS6320CTFKB
Description
- HP & Torque: 815 HP / 775 FT LBS
Compression Ratio: 11.0:1
Aluminum Heads
Hydraulic Roller Cam
Forged Crank
Forged Pistons
Block:
- NEW BluePrint Cast Iron Block
- Manufactured and Machined in the USA!
- 4-Bolt Main
- 4.600" Bore
- 1-Piece Rear Main Seal
- Mech fuel pump provision: Yes
- Tall Deck (Cyl Deck is Approx .400 taller / wider than oem block)
Rotating Assembly:
- New BluePrint Forged Crankshaft
4.750" Stroke
Forged H-beam 6.635" connecting rods
Forged Pistons
Internal
Cylinder Heads:
- BluePrint Aluminum Cylinder Heads -PS8012
- 119cc chamber
- 2.30" intake/1.88" exhaust valves
- 358cc intake/125cc exhaust runners
- Cylinder heads feature a .300 in. raised exhaust port vs an OEM casting.
- Must verify clearance of exhaust,shift linkage, steering components etc. before ordering.
Cam Specs:
- Cam Type: Roller
.698 / .698 Lift
272 / 282 duration @ .050 - 110 degree LSA
Also Includes:
- Holley Sniper EFI
- Valve covers, oil pan and timing cover
- Harmonic balancer
- Intake Manifold
- Pro Billet Distributor
Dyno test results shipped with engine - Installed Complete Black Front accessory drive with alternator, P/S, A/C, WP, all pulleys and belts.
Warranty:
30 month / 50,000 mile
Notes:
- Not for use in pollution controlled vehicles.
- This engine features .300 raised exhaust ports and .400 deck height increase over OEM.
- Must verify clearance of exhaust, shift linkage, steering components etc. before ordering.
Customer Reviews
Your BluePrint engine was dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet.
Part Number: PS6320CTCKB
Fuel Delivery Type: Sniper EFI
Spark Plug: BPP7938 NGK 7938 BKR5E
Spark Plug Gap: .035"
Harmonic Balancer: Non-Weighted
Flexplate/Flywheel: Non-Weighted
Stall Converter: 3,800-4,200
Intake Manifold: Single plane, satin aluminum
Fuel Recommendation: 91 Octane
Timing (Initial/Total Advance): Initial timing - 10-16° and Total timing 32-34°. If using a dominator style carb, initial timing 16-20 and total timing of 32-34 by 2500 RPM.
Firing Order: 1,8,4,3,6,5,7,2
Recommended Break in Oil : BPP710 (Click Here)
Recommended Service Oil : BPP10W30 (Click Here)
Recommended Oil Filter ; BPP51061 (Click Here)
Total Oil capacity with production oil pan, and Correct BPP51061 Filter : 8 Quarts
Notes: New BluePrint block manufactured and machined in the USA,
Click here to download a copy of the Installation Guide that came with your BluePrint engine.
Header Partners: HUSLER 770-664-8880 Sanderson 650-583-4590 Lemons 805-239-8998
