Mopar 408CI Stroker Crate Engine | Small Block Chrysler | Drop In Ready | Roller Cam

$8,199.00

This engine will be dyno tested before it ships to you at no additional charge (others charge $500)!
Part #: BPC4085CTCD

Description

Dyno Tested Warranty
  • HP & Torque: 465 HP / 494 FT LBS
    Compression Ratio: 10:1
    Aluminum Heads
    Roller Cam
    Cast Steel Crank
    Forged Pistons

Block:

  • Hand picked seasoned Magnum block
    Square and parallel decked
    Align honed main bearing bore
    Cylinders honed on computer controlled machine to within .0002 straightness and roundness
    Cylinders are sonic tested for thickness
    2-Bolt Main
    4.000" Bored .040" over
    2-Piece Rear Main Seal
    Mech fuel pump provision: Yes

Rotating Assembly:

  • New Steel crankshaft
    4.000" Stroke
    Forged Magnum 6.123" connecting rods w/ 150,000 psi bolts
    Forged pistons
    External

Cylinder Heads:

  • BluePrint Engines Assembled and Machined Edelbrock 61769 Casting
  • Aluminum Magnum Pattern Cylinder Heads - 58cc chamber
  • Aluminum Roller Rockers
  • 2.02" intake/1.60" exhaust valves
    176cc intake/75cc exhaust runners

Cam Specs:

  • Cam Type: Roller
    .580 Intake .577 Exhaust
    235 Intake / 242 Exhaust duration
    @ .050 - 110 degree lobe separation

Ignition Timing:

  • 34 degrees total at 4000 RPM

Also Includes:

  • Valve covers, oil pan and timing cover, Standard Rotation, Drive side inlet water pump and timing cover, plugs, wires, distributor, waterneck, thermostat, fuel pump and fuel line, harmonic balancer, air cleaner.
    Dyno test results shipped with engine

Warranty:

  • 30 month / 50,000 mile

Notes:

  • Not for use in pollution controlled vehicles.

Yellow Exclamation Triangle WARNING: Cancer and Reproductive Harm-
www.P65Warnings.ca.gov

This engine will be dyno tested before it ships to you at no additional charge (others charge $500)!
Part #: BPC4085CTCD

Description

Dyno Tested Warranty
  • HP & Torque: 465 HP / 494 FT LBS
    Compression Ratio: 10:1
    Aluminum Heads
    Roller Cam
    Cast Steel Crank
    Forged Pistons

Block:

  • Hand picked seasoned Magnum block
    Square and parallel decked
    Align honed main bearing bore
    Cylinders honed on computer controlled machine to within .0002 straightness and roundness
    Cylinders are sonic tested for thickness
    2-Bolt Main
    4.000" Bored .040" over
    2-Piece Rear Main Seal
    Mech fuel pump provision: Yes

Rotating Assembly:

  • New Steel crankshaft
    4.000" Stroke
    Forged Magnum 6.123" connecting rods w/ 150,000 psi bolts
    Forged pistons
    External

Cylinder Heads:

  • BluePrint Engines Assembled and Machined Edelbrock 61769 Casting
  • Aluminum Magnum Pattern Cylinder Heads - 58cc chamber
  • Aluminum Roller Rockers
  • 2.02" intake/1.60" exhaust valves
    176cc intake/75cc exhaust runners

Cam Specs:

  • Cam Type: Roller
    .580 Intake .577 Exhaust
    235 Intake / 242 Exhaust duration
    @ .050 - 110 degree lobe separation

Ignition Timing:

  • 34 degrees total at 4000 RPM

Also Includes:

  • Valve covers, oil pan and timing cover, Standard Rotation, Drive side inlet water pump and timing cover, plugs, wires, distributor, waterneck, thermostat, fuel pump and fuel line, harmonic balancer, air cleaner.
    Dyno test results shipped with engine

Warranty:

  • 30 month / 50,000 mile

Notes:

  • Not for use in pollution controlled vehicles.

Yellow Exclamation Triangle WARNING: Cancer and Reproductive Harm-
www.P65Warnings.ca.gov

Customer Reviews

Based on 1 review Write a review

Your BluePrint engine was dyno tested with the parts and specifications listed below.  If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet.

 

Part Number: BPC4083CT

Fuel Delivery Type: Carbureted, 750cfm

Spark Plug: BPP7938 NGK 7938 BKR5E

Spark Plug Gap: .035"

Harmonic Balancer: 360 EXTERNALLY BALANCED '93-'97, 7.25" Diameter

Flexplate/Flywheel: Pre-Magnum, Weighed 360

Stall Converter: 2000-2400 rpm

Intake Manifold: Dual plane, satin aluminum

Fuel Recommendation: 91 Octane

Timing (Initial/Total Advance): Initial timing - 10-16° and Total timing 32-34°

Firing Order: 1,8,4,3,6,5,7,2

Recommended Break in Oil : BPP710 (Click Here)

Recommended Service Oil : BPP10W30 (Click Here) 

Recommended Oil Filter ; BPP51515 (Click Here)

Total Oil capacity with production oil pan, and Correct BPP51515 Filter : 5 Quarts

 

Click here to download a copy of the Installation Guide that came with your BluePrint engine.

BPC4085CTCD Recommended Parts
  • SMALL BLOCK FORD / SMALL BLOCK MOPAR OIL FILTER

    BPP51515

    $12.95

  • BluePrint Engines 10w30 Engine Oil - 1 Quart

    BPP10W30

    $8.95

  • IGNITION COIL | EXTERNAL E-CORE | 50K VOLT | BLACK

    BPP8252BK

    $55.95

  • STARTER | MOPAR V8 | '65-'87 | MTG BLOCK W/NOSE | OEM FINISH

    BPP9613RD

    $171.95

  • Keep Calm And Do a Burnout Black T-Shirt

    BPM01KC-SM

    $22.00

  • Black BluePrint Flag T-Shirt

    BPM01FGB-SM

    $22.00

  • BluePrint Engines Stroke It T-shirt

    $24.00

  • BluePrint Engines Firing Order T-shirt SBC / BBC / Mopar

    BPM01SBC

    $24.00

  • Check Out This Product and More On Our Pinterest Page