572 CI ProSeries Stroker Crate Engine | Big Block GM Style | BBC | Deluxe Dressed w/ Pulleys - Polished
This engine will be dyno tested before it ships to you at no additional charge (others charge $500)!
Part Number: PS5720CTCK
Description:


HP & Torque: 750 HP / 690 FT LBS
Compression Ratio: 10.0:1
Aluminum Heads
Hydraulic Roller Cam
Forged Crank
Forged Pistons
Block:
- NEW BluePrint Cast Iron Block
- Manufactured and Machined in the USA!
- 4-Bolt Main
- 4.500" Bore
- 1-Piece Rear Main Seal
- Mech fuel pump provision: Yes
- Tall Deck (Cyl Deck is Approx .400 taller / wider than oem block)
Rotating Assembly:
- New BluePrint Forged Crankshaft
4.500" Stroke
Forged H-beam 6.535" connecting rods
Forged Pistons
Internal
Cylinder Heads:
- BluePrint Aluminum Cylinder Heads -PS8012
- 119cc chamber
- 2.30" intake/1.88" exhaust valves
- 358cc intake/125cc exhaust runners
- Cylinder heads feature a .300 in. raised exhaust port vs an OEM casting.
- Must verify clearance of exhaust/headers
Cam Specs:
- Cam Type: Roller
.698 Intake .698 Exhaust
272 Intake / 282 Exhaust duration
@ .050 - 110 degree lobe separation
Also Includes:
-
Valve covers, oil pan and timing cover
Harmonic balancer
- Intake Manifold
- Carburetor
- Distributor
- Plugs and wires
- Dyno test results shipped with engine
-
Installed Complete Polished Front Accessory Drive
Alternator, A/C, P/S, WP, All belts and pulleys.
Warranty:
30 month / 50,000 mile
This engine will be dyno tested before it ships to you at no additional charge (others charge $500)!
Part Number: PS5720CTCK
Description:


HP & Torque: 750 HP / 690 FT LBS
Compression Ratio: 10.0:1
Aluminum Heads
Hydraulic Roller Cam
Forged Crank
Forged Pistons
Block:
- NEW BluePrint Cast Iron Block
- Manufactured and Machined in the USA!
- 4-Bolt Main
- 4.500" Bore
- 1-Piece Rear Main Seal
- Mech fuel pump provision: Yes
- Tall Deck (Cyl Deck is Approx .400 taller / wider than oem block)
Rotating Assembly:
- New BluePrint Forged Crankshaft
4.500" Stroke
Forged H-beam 6.535" connecting rods
Forged Pistons
Internal
Cylinder Heads:
- BluePrint Aluminum Cylinder Heads -PS8012
- 119cc chamber
- 2.30" intake/1.88" exhaust valves
- 358cc intake/125cc exhaust runners
- Cylinder heads feature a .300 in. raised exhaust port vs an OEM casting.
- Must verify clearance of exhaust/headers
Cam Specs:
- Cam Type: Roller
.698 Intake .698 Exhaust
272 Intake / 282 Exhaust duration
@ .050 - 110 degree lobe separation
Also Includes:
-
Valve covers, oil pan and timing cover
Harmonic balancer
- Intake Manifold
- Carburetor
- Distributor
- Plugs and wires
- Dyno test results shipped with engine
-
Installed Complete Polished Front Accessory Drive
Alternator, A/C, P/S, WP, All belts and pulleys.
Warranty:
30 month / 50,000 mile
Your BluePrint engine was dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet.
Part Number: PS5720CT
Fuel Delivery Type: Carbureted, 1050cfm recommended
Spark Plug: BPP7938 NGK 7938 BKR5E
Spark Plug Gap: .035"
Harmonic Balancer: Non-Weighted
Flexplate/Flywheel: Non-Weighted
Stall Converter: 2200+
Intake Manifold: Single plane, satin aluminum
Fuel Recommendation: 91 Octane
Timing (Initial/Total Advance): Initial timing - 10-16° and Total timing 32-34°. If using a dominator style carb, initial timing 16-20 and total timing of 32-34 by 2500 RPM.
Firing Order: 1,8,4,3,6,5,7,2
Recommended Break in Oil : BPP710 (Click Here)
Recommended Service Oil : BPP10W30 (Click Here)
Recommended Oil Filter ; BPP51061 (Click Here)
Total Oil capacity with production oil pan, and Correct BPP51061 Filter : 8 Quarts
Notes: New BluePrint block manufactured and machined in the USA,
Click here to download a copy of the Installation Guide that came with your BluePrint engine.
Header Partners: HUSLER 770-664-8880 Sanderson 650-583-4590 Lemons 805-239-8998