540 CI ProSeries Stroker Crate Engine | Big Block GM Style | BBC | Base Dressed Longblock with Carburetor

$12,399.00

This engine will be dyno tested before it ships to you at no additional charge (others charge $500)!

Part: PS5401CTC

IT ALL COMES DOWN TO RESULTS

We make sure we hit our target horsepower and proper torque with every crate engine. We use an advanced computerized balancer to get our rotating assemblies within two grams, ensuring silky smooth power over the entire RPM range. That's precisely why our engines sound and run better than our competitors.

BRAGGIN RIGHTS INCLUDED!

A Comprehensive, dyno-generated printout showing these critical specs will accompany your delivered engine. No more guessing or wondering what your installed engine's real-world peak horsepower and torque ratings actually are. Any doubters in the crowd? Simply flash 'em your dyno results! Recommended Fuel: 91 Octane

WARRANTY

The satisfaction of our customers is our highest priority at BluePrint Engines. We use quality components to balance your engine's rotating assembly within two grams of spec. We dyno test your crate engine and certify that it's ready to deliver horsepower and torque. We give your BluePrint engine the industry's best-in-class warranty for 30 months or 50,000 miles — with the extra confidence only BluePrint can provide. Our warranty applies to individual or professional installations, is fully transferable, and covers engines worldwide.
HP & Torque: 670 HP / 660 FT LBS
Compression Ratio: 10.0:1
Aluminum Heads
Hydraulic Roller Cam
Forged Crank
Forged Pistons

Block:

NEW BluePrint Cast Iron Block
Manufactured and Machined in the USA!
4-Bolt Main
4.500" Bore
1-Piece Rear Main Seal
Mech fuel pump provision: Yes
Standard Deck

Rotating Assembly:

New BluePrint Forged Crankshaft
4.250" Stroke
Forged H-beam 6.385" connecting rods
Forged Pistons
Internal

Cylinder Heads:

BluePrint Aluminum Cylinder Heads -PS8013
119cc chamber
2.30" intake/1.88" exhaust valves
316cc intake/124cc exhaust runners
Cylinder heads feature a .300 in. raised exhaust port vs an OEM casting.
Must verify header/exhaust clearance

Cam Specs:

Cam Type: Roller
.647 Intake .647 Exhaust
248 Intake / 254 Exhaust duration
@ .050 - 112 degree lobe separation

Also Includes:

Valve covers, oil pan and timing cover
Harmonic balancer
Intake Manifold
Carb
Distributor
plugs and wires
Dyno test results shipped with engine

Warranty:

30 month / 50,000 mile

Notes:

New BluePrint block manufactured and machined in the USA.
Not for EGR
Cylinder heads feature a .300 in. raised exhaust port vs an OEM casting
Must verify header/exhaust clearance

SPECIFICATION

REVIEWS

RECOMMENDATIONS

This engine will be dyno tested before it ships to you at no additional charge (others charge $500)!

Part: PS5401CTC

IT ALL COMES DOWN TO RESULTS

We make sure we hit our target horsepower and proper torque with every crate engine. We use an advanced computerized balancer to get our rotating assemblies within two grams, ensuring silky smooth power over the entire RPM range. That's precisely why our engines sound and run better than our competitors.

BRAGGIN RIGHTS INCLUDED!

A Comprehensive, dyno-generated printout showing these critical specs will accompany your delivered engine. No more guessing or wondering what your installed engine's real-world peak horsepower and torque ratings actually are. Any doubters in the crowd? Simply flash 'em your dyno results! Recommended Fuel: 91 Octane

WARRANTY

The satisfaction of our customers is our highest priority at BluePrint Engines. We use quality components to balance your engine's rotating assembly within two grams of spec. We dyno test your crate engine and certify that it's ready to deliver horsepower and torque. We give your BluePrint engine the industry's best-in-class warranty for 30 months or 50,000 miles — with the extra confidence only BluePrint can provide. Our warranty applies to individual or professional installations, is fully transferable, and covers engines worldwide.
HP & Torque: 670 HP / 660 FT LBS
Compression Ratio: 10.0:1
Aluminum Heads
Hydraulic Roller Cam
Forged Crank
Forged Pistons

Block:

NEW BluePrint Cast Iron Block
Manufactured and Machined in the USA!
4-Bolt Main
4.500" Bore
1-Piece Rear Main Seal
Mech fuel pump provision: Yes
Standard Deck

Rotating Assembly:

New BluePrint Forged Crankshaft
4.250" Stroke
Forged H-beam 6.385" connecting rods
Forged Pistons
Internal

Cylinder Heads:

BluePrint Aluminum Cylinder Heads -PS8013
119cc chamber
2.30" intake/1.88" exhaust valves
316cc intake/124cc exhaust runners
Cylinder heads feature a .300 in. raised exhaust port vs an OEM casting.
Must verify header/exhaust clearance

Cam Specs:

Cam Type: Roller
.647 Intake .647 Exhaust
248 Intake / 254 Exhaust duration
@ .050 - 112 degree lobe separation

Also Includes:

Valve covers, oil pan and timing cover
Harmonic balancer
Intake Manifold
Carb
Distributor
plugs and wires
Dyno test results shipped with engine

Warranty:

30 month / 50,000 mile

Notes:

New BluePrint block manufactured and machined in the USA.
Not for EGR
Cylinder heads feature a .300 in. raised exhaust port vs an OEM casting
Must verify header/exhaust clearance

Your BluePrint engine was dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet.

Part Number: PS5401CT

Fuel Delivery Type: Carbureted, 850cfm recommended

Spark Plug: BPP7938 NGK 7938 BKR5E

Spark Plug Gap: .035"

Harmonic Balancer: Non-Weighted

Flexplate/Flywheel: Non-Weighted

Stall Converter: 2200+

Intake Manifold: Single Plane recommended

Fuel Recommendation: 91 Octane

Timing (Initial/Total Advance): Initial timing - 10-16° and Total timing 32-34°

Firing Order: 1,8,4,3,6,5,7,2

Recommended Break in Oil : BPP710 (Click Here)