BluePrint Engines - GM Compatible 376 c.i. Pro Series Engine - Deluxe Dressed with Black Pulley Kit - Electronic Fuel Injected
This engine will be dyno tested before it ships to you at no additional charge (others charge $500)!
Part Number: PSLS3760SCTKB
Description

- HP & Torque: 700 HP / 640 FT LBS
- Compression Ratio: 9.5:1
- Aluminum Heads
- Hydraulic Roller Cam
- Forged Crankshaft
- Forged Pistons
Block:
- New GM Aluminum 6.2L block
- OEM Block Machined in the USA!
- 1-Piece Rear Main Seal
Rotating Assembly:
- Nodular Iron crankshaft
- 4.125" Stroke
- 6.125" connecting rods w/ 150,000 psi bolts
- Forged Pistons
- Internally Balanced
Cylinder Heads:
- BluePrint Aluminum Cylinder Heads -PS8015
- 72cc chamber
- 2.165" intake/1.600" exhaust valves
- 259cc intake/102cc exhaust runners
Cam Specs:
- Cam Type: Roller Cam
- .612 Intake .585 Exhaust
- 225 Intake / 238 Exhaust duration
- @ .050 - 113 degree lobe separation
Ignition Timing:
- Controlled by Powertrain Control Module
Also Includes:
- 3.0L Whipple Supercharger
- Complete ECU, Harness, Pedal engine controller kit.
- Oil Pan
- Intake Manifold
- Fuel Injectors and Rail
- Coil Packs
- Spark Plugs and Wires
- Waterpump
- Harmonic Balancer
- Installed complete black front accessory drive. WP, Alt, P/S, A/C, all belts and pulleys.
Warranty:
- 30 month / 50,000 mile
Notes:
BluePrint Engines Recommends Air Intake Kit BPPLS01013 to ensure correct MAF calculations and Dyno calibration are maintained with the above ECU / tuning.
This engine will be dyno tested before it ships to you at no additional charge (others charge $500)!
Part Number: PSLS3760SCTKB
Description

- HP & Torque: 700 HP / 640 FT LBS
- Compression Ratio: 9.5:1
- Aluminum Heads
- Hydraulic Roller Cam
- Forged Crankshaft
- Forged Pistons
Block:
- New GM Aluminum 6.2L block
- OEM Block Machined in the USA!
- 1-Piece Rear Main Seal
Rotating Assembly:
- Nodular Iron crankshaft
- 4.125" Stroke
- 6.125" connecting rods w/ 150,000 psi bolts
- Forged Pistons
- Internally Balanced
Cylinder Heads:
- BluePrint Aluminum Cylinder Heads -PS8015
- 72cc chamber
- 2.165" intake/1.600" exhaust valves
- 259cc intake/102cc exhaust runners
Cam Specs:
- Cam Type: Roller Cam
- .612 Intake .585 Exhaust
- 225 Intake / 238 Exhaust duration
- @ .050 - 113 degree lobe separation
Ignition Timing:
- Controlled by Powertrain Control Module
Also Includes:
- 3.0L Whipple Supercharger
- Complete ECU, Harness, Pedal engine controller kit.
- Oil Pan
- Intake Manifold
- Fuel Injectors and Rail
- Coil Packs
- Spark Plugs and Wires
- Waterpump
- Harmonic Balancer
- Installed complete black front accessory drive. WP, Alt, P/S, A/C, all belts and pulleys.
Warranty:
- 30 month / 50,000 mile
Notes:
BluePrint Engines Recommends Air Intake Kit BPPLS01013 to ensure correct MAF calculations and Dyno calibration are maintained with the above ECU / tuning.
Your BluePrint engine was dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet.
Part Number: PSLS3760SCTKB
Fuel Delivery Type: Fuel Injection
Spark Plug: NGK 3689 (TR6IX)
Spark Plug Gap: .030"
Harmonic Balancer: Non Weighted
Flexplate/Flywheel: Non Weighted
Stall Converter: 2200+
Intake Manifold: N/A
Fuel Recommendation: 91 Octane
Timing (Initial/Total Advance): Controlled by Powertrain Control Module
Firing Order: 1,8,7,2,6,5,4,3
Notes: Recommended break in oil for your BluePrint Crate Engine: BPP710
Click here to download a copy of the Installation Guide that came with your BluePrint engine.