BluePrint Engines Builder Series 454 CI SBC ProSeries Stroker Crate Engine and 700R4 Auto Trans Package | Small Block GM Style | Deluxe Dressed Longblock w/ Pulleys - Polished with Fuel Injection
This engine will be dyno tested before it ships to you at no additional charge (others charge $500)!
Part Number: B454FK700
Description:


- HP & Torque: 563 HP / 545 FT LBS
Compression Ratio: 10.0:1
Aluminum Heads
Hydraulic Roller Cam
Forged Crank
Forged Pistons
BLOCK:
- NEW BluePrint Cast Iron Block
Manufactured and Machined in the USA!
4-Bolt Main
4.250" Bore
2-Piece Rear Main Seal
Mech fuel pump provision: Yes
Passenger Side Dipstick - Drilled and tapped for clutch linkage
ROTATING ASSEMBLY:
- New BluePrint Forged Crankshaft
4.000" Stroke
Forged 6.000" connecting rods
Forged Pistons
Internal Front/ Internal Rear
CYLINDER HEADS:
- BluePrint Aluminum Cylinder Heads - HP8103
64cc chamber
2.08" intake/1.60" exhaust valves
220cc intake/67cc exhaust runners
CAM SPECS:
- Cam Type: Roller
.638 Intake .622 Exhaust
251 Intake / 259 Exhaust duration
@ .050 - 114 degree lobe separation
Ignition Timing:
Initial timing - 10-16° and Total timing 32-34°
Also Includes:
- Satin aluminum Intake Manifold
Complete EFI System - EFI fuel pump kit
Valve covers, oil pan and timing cover
Dyno test results shipped with engine - Spark plugs & wires
-
180 degree Thermostat & housing
Installed complete front accessory drive with A/C and P/S
-
ASSEMBLED W/ COMPLETE 700R4 AUTO TRANS PACKAGE:
700R4 Complete Package
2200-2400 Stall Torque converter
Flexplate
Starter
Warranty:
30 month / 50,000 mile
This engine will be dyno tested before it ships to you at no additional charge (others charge $500)!
Part Number: B454FK700
Description:


- HP & Torque: 563 HP / 545 FT LBS
Compression Ratio: 10.0:1
Aluminum Heads
Hydraulic Roller Cam
Forged Crank
Forged Pistons
BLOCK:
- NEW BluePrint Cast Iron Block
Manufactured and Machined in the USA!
4-Bolt Main
4.250" Bore
2-Piece Rear Main Seal
Mech fuel pump provision: Yes
Passenger Side Dipstick - Drilled and tapped for clutch linkage
ROTATING ASSEMBLY:
- New BluePrint Forged Crankshaft
4.000" Stroke
Forged 6.000" connecting rods
Forged Pistons
Internal Front/ Internal Rear
CYLINDER HEADS:
- BluePrint Aluminum Cylinder Heads - HP8103
64cc chamber
2.08" intake/1.60" exhaust valves
220cc intake/67cc exhaust runners
CAM SPECS:
- Cam Type: Roller
.638 Intake .622 Exhaust
251 Intake / 259 Exhaust duration
@ .050 - 114 degree lobe separation
Ignition Timing:
Initial timing - 10-16° and Total timing 32-34°
Also Includes:
- Satin aluminum Intake Manifold
Complete EFI System - EFI fuel pump kit
Valve covers, oil pan and timing cover
Dyno test results shipped with engine - Spark plugs & wires
-
180 degree Thermostat & housing
Installed complete front accessory drive with A/C and P/S
-
ASSEMBLED W/ COMPLETE 700R4 AUTO TRANS PACKAGE:
700R4 Complete Package
2200-2400 Stall Torque converter
Flexplate
Starter
Warranty:
30 month / 50,000 mile
Customer Reviews
Your BluePrint engine was dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet.
Part Number: B454FK700
Fuel Delivery Type: Sniper EFI
Spark Plug: BPP7938 NGK 7938 BKR5E
Spark Plug Gap: .035"
Harmonic Balancer: Non-Weighted
Flexplate/Flywheel: Non-weighted
Stall Converter: 2200+
Intake Manifold: N/A
Fuel Recommendation: 91 Octane
Timing (Initial/Total Advance): Initial timing - 10-16° and Total timing 32-34°
Firing Order: 1,8,4,3,6,5,7,2
Notes: New BluePrint block manufactured and machined in the USA. Recommended break in oil for your BluePrint Crate Engine: BPP710, Not for EGR
Click here to download a copy of the Installation Guide that came with your BluePrint engine.