We are experiencing longer than normal build times due to parts and shipping delays, please contact us through live chat for accurate lead times.

BluePrint Engines Builder Series 383CI Stroker Crate Engine and 700R4 Auto Trans Package | Small Block GM Style | Dressed Longblock with Fuel Injection | Aluminum Heads | Roller Cam

$17,495.00

This engine will be dyno tested before it ships to you at no additional charge (others charge $500)!
Part #: B383FK700

Description

Dyno Tested Warranty
  • HP & Torque: 436 HP / 443 FT LBS
    Compression Ratio: 10.0:1
    Aluminum Heads
    Hydraulic Roller Cam
    Cast Steel Crank
    Hypereutectic Pistons

    Also Includes:

    • Intake Manifold dual plane, satin aluminum
      Complete EFI system
      Valve covers, oil pan and timing cover
      Dyno test results shipped with engine
    • EFI Fuel Pump kit
    • Spark plugs & wires
    • 180 degree Thermostat & housing
      Oil filter
      Plug wire seperators
    • complete front accessory drive with A/C and P/S

    ASSEMBLED W/ COMPLETE 700R4 AUTO TRANS PACKAGE:

    700R4 Complete Package

    2200-2400 Stall Torque converter

    Flexplate
    Starter

    Warranty

    • 30 month / 50,000 mile

    Notes:

    • Package Ships assembled as pictured. 
    • Due to numerous tire/rear gear combinations, This transmission does NOT ship with a speedometer gear, or sender housing. 
    • IF THIS IS BEING ORDERED FOR A FACTORY FIVE VEHICLE,
      STOP AND CALL US AT 1-800-483-4263 FOR PROPER FITMENT
      OR VISIT FACTORYFIVEENGINES.COM
    This engine will be dyno tested before it ships to you at no additional charge (others charge $500)!
    Part #: B383FK700

    Description

    Dyno Tested Warranty
    • HP & Torque: 436 HP / 443 FT LBS
      Compression Ratio: 10.0:1
      Aluminum Heads
      Hydraulic Roller Cam
      Cast Steel Crank
      Hypereutectic Pistons

      Also Includes:

      • Intake Manifold dual plane, satin aluminum
        Complete EFI system
        Valve covers, oil pan and timing cover
        Dyno test results shipped with engine
      • EFI Fuel Pump kit
      • Spark plugs & wires
      • 180 degree Thermostat & housing
        Oil filter
        Plug wire seperators
      • complete front accessory drive with A/C and P/S

      ASSEMBLED W/ COMPLETE 700R4 AUTO TRANS PACKAGE:

      700R4 Complete Package

      2200-2400 Stall Torque converter

      Flexplate
      Starter

      Warranty

      • 30 month / 50,000 mile

      Notes:

      • Package Ships assembled as pictured. 
      • Due to numerous tire/rear gear combinations, This transmission does NOT ship with a speedometer gear, or sender housing. 
      • IF THIS IS BEING ORDERED FOR A FACTORY FIVE VEHICLE,
        STOP AND CALL US AT 1-800-483-4263 FOR PROPER FITMENT
        OR VISIT FACTORYFIVEENGINES.COM

      Your BluePrint engine was dyno tested with the parts and specifications listed below.  If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet.

       

      Part Number: B383FK700

      Fuel Delivery Type: EFI

      Spark Plug: BPP7938 NGK 7938 BKR5E

      Spark Plug Gap: .035"

      Harmonic Balancer: BPP400L - Weighted, 8" diameter

      Flexplate/Flywheel: Weighted, 1 pc RMS

      Stall Converter: 2400+

      Intake Manifold: Dual plane, satin aluminum

      Fuel Recommendation: 91 Octane

      Timing (Initial/Total Advance): Initial timing - 10-16° and Total timing 32-34°

      Firing Order: 1,8,4,3,6,5,7,2

      Notes: Recommended break in oil for your BluePrint Crate Engine:BPP710, Not for EGR

       

      Click here to download a copy of the Installation Guide that came with your BluePrint engine.

      Check Out This Product and More On Our Pinterest Page