BluePrint Engines Builder Series 347CI Stroker Mustang Engine and TKX Manual Trans Package | Small Block Ford Style | Deluxe Dressed Longblock w/ Pulleys - Polished with Carburetor | Aluminum Heads | Roller Cam
Part #: B347KTKXM
Description:


- HP & Torque: 415 HP / 415 FT LBS
Compression Ratio: 10.0:1
Aluminum Heads
Hydraulic Roller Cam
Steel Crank
Forged Pistons
Block:
- Hand picked seasoned block
Square and parallel decked
Align honed main bearing bore
Cylinders honed on computer controlled machine to within .0002 straightness and roundness
Cylinders are sonic tested for thickness
2-Bolt Main
4.000" Bored .040" Over
1-Piece Rear Main Seal
Mech fuel pump provision: Yes
Rotating Assembly:
- New BluePrint Cast steel crankshaft
3.400" Stroke
Forged I-beam 5.400" connecting rods
Forged pistons
28oz External balance
Cylinder Heads:
- BluePrint Aluminum Cylinder Heads -HP9009
60cc chamber
2.02" intake/1.60" exhaust valves
190cc intake/65cc exhaust runners
Cam Specs:
- Cam Type: Roller
.543 Intake
.554 Exhaust & 218 Intake
226 Exhaust duration @ .050 - 112 degree lobe separation
Ignition Timing:
- 34 Degrees Total at 3500 RPM
Also Includes:
- Dual plane, satin aluminum intake manifold
600 CFM Carburetor
Pro Billet Distributor
Mustang Style Valve covers *Mustang scripted valve cover may be different than pictured based on availability*
7 Quart oil pan
- Electric Fuel Pump
- Installed Complete Front Accessory Drive With A/C, P/S, Alternator, WP, Belts, Pulleys.
ASSEMBLED W/ COMPLETE TKX TRANS PACKAGE:
Mcleod Super Street Pro single disk clutch
Hydraulic throw out bearing
Aluminum bell housing
Flywheel
Engine guard
Starter
First Gear Ratio: 2.87:1
Second Gear Ratio: 1.89:1
Third Gear Ratio: 1.28:1
Fourth Gear Ratio: 1.00:1
Fifth Gear Ratio: 0.81:1
Warranty:
- 30 month / 50,000 mile
Notes:
Package Ships assembled as pictured.
-
IF THIS IS BEING ORDERED FOR A FACTORY FIVE VEHICLE,
STOP AND CALL US AT 1-800-483-4263 FOR PROPER FITMENT
OR VISIT FACTORYFIVEENGINES.COM
Part #: B347KTKXM
Description:


- HP & Torque: 415 HP / 415 FT LBS
Compression Ratio: 10.0:1
Aluminum Heads
Hydraulic Roller Cam
Steel Crank
Forged Pistons
Block:
- Hand picked seasoned block
Square and parallel decked
Align honed main bearing bore
Cylinders honed on computer controlled machine to within .0002 straightness and roundness
Cylinders are sonic tested for thickness
2-Bolt Main
4.000" Bored .040" Over
1-Piece Rear Main Seal
Mech fuel pump provision: Yes
Rotating Assembly:
- New BluePrint Cast steel crankshaft
3.400" Stroke
Forged I-beam 5.400" connecting rods
Forged pistons
28oz External balance
Cylinder Heads:
- BluePrint Aluminum Cylinder Heads -HP9009
60cc chamber
2.02" intake/1.60" exhaust valves
190cc intake/65cc exhaust runners
Cam Specs:
- Cam Type: Roller
.543 Intake
.554 Exhaust & 218 Intake
226 Exhaust duration @ .050 - 112 degree lobe separation
Ignition Timing:
- 34 Degrees Total at 3500 RPM
Also Includes:
- Dual plane, satin aluminum intake manifold
600 CFM Carburetor
Pro Billet Distributor
Mustang Style Valve covers *Mustang scripted valve cover may be different than pictured based on availability*
7 Quart oil pan
- Electric Fuel Pump
- Installed Complete Front Accessory Drive With A/C, P/S, Alternator, WP, Belts, Pulleys.
ASSEMBLED W/ COMPLETE TKX TRANS PACKAGE:
Mcleod Super Street Pro single disk clutch
Hydraulic throw out bearing
Aluminum bell housing
Flywheel
Engine guard
Starter
First Gear Ratio: 2.87:1
Second Gear Ratio: 1.89:1
Third Gear Ratio: 1.28:1
Fourth Gear Ratio: 1.00:1
Fifth Gear Ratio: 0.81:1
Warranty:
- 30 month / 50,000 mile
Notes:
Package Ships assembled as pictured.
-
IF THIS IS BEING ORDERED FOR A FACTORY FIVE VEHICLE,
STOP AND CALL US AT 1-800-483-4263 FOR PROPER FITMENT
OR VISIT FACTORYFIVEENGINES.COM
Customer Reviews
Your BluePrint engine was dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet.
Part Number: B347KTKOM
Fuel Delivery Type: 600 CFM carburetor
Spark Plug: BPP7938 (BKR5E/7938)
Spark Plug Gap: .035"
Harmonic Balancer: BPP28 - 28.4 Ounce, 6.4" Diameter
Flexplate/Flywheel: 28.4 Ounce Weighted
Stall Converter: 2000-2400 rpm
Intake Manifold: Dual plane, satin aluminum
Fuel Recommendation: 91 Octane
Timing (Initial/Total Advance): Initial timing - 10-16° and Total timing 32-34°
Firing Order: 1,3,7,2,6,5,4,8
Notes: Recommended oil for your BluePrint Crate Engine: 10W30, Non-Synthetic, Not for EGR
Click here to download a copy of the Installation Guide that came with your BluePrint engine.