BluePrint Engines 302CI Cruiser Crate Engine | Small Block Ford Style | Deluxe Dressed Longblock with Black Pulley Kit | Aluminum Heads | Roller Cam | Carbureted | Front Sump Pan
Description
Part#: BP302CTCKB
- HP & Torque: 361 HP / 334 FT LBS
Compression Ratio: 9.4:1
Aluminum Heads
Hydraulic Roller Cam
Cast Steel Crank
Hypereutectic Pistons
Block:
NEW BluePrint Cast Iron Block
4-Bolt Main
4.000" Bore
1-Piece Rear Main Seal
Mech fuel pump provision: Yes
Rotating Assembly:
- 3.000" Stroke
OEM type 5.090" connecting rods
Hypereutectic pistons
50oz External balance
Cylinder Heads:
- BluePrint Aluminum Cylinder Heads -HP9008
60cc chamber
2.02" intake/1.60" exhaust valves
190cc intake/60cc exhaust runners
Cam Specs:
- Roller Cam
.533 Intake / .544 Exhaust
215 Intake / 220 Exhaust Duration
@ .050 - 114 Degree Lobe Separation
Ignition Timing:
- 10-16 degrees initial, 32-34 total
Also Includes:
- Front Sump Oil Pan
Valve Covers
Timing Cover - Distributor
- Carburetor
- Spark Plugs and Wires
- Waterpump
- Harmonic Balancer
- Installed Complete Black front accessory Drive. WP, Alt, P/S, A/C, all belts and pulleys.
-
Dyno test results shipped with engine
Warranty:
- 30 month / 50,000 mile
Notes:
- Engine requires a V-belt standard rotation water pump and belt system
-
Engine timing cover is designed for standard rotation water pump ONLY
- This engine is an excellent cruiser and daily driver engine. This engine makes up to 16 inches of vacuum, and is designed to work excellent with power brakes, stock torque converter, stock gearing, and run on 87 octane fuel
Description
Part#: BP302CTCKB
- HP & Torque: 361 HP / 334 FT LBS
Compression Ratio: 9.4:1
Aluminum Heads
Hydraulic Roller Cam
Cast Steel Crank
Hypereutectic Pistons
Block:
NEW BluePrint Cast Iron Block
4-Bolt Main
4.000" Bore
1-Piece Rear Main Seal
Mech fuel pump provision: Yes
Rotating Assembly:
- 3.000" Stroke
OEM type 5.090" connecting rods
Hypereutectic pistons
50oz External balance
Cylinder Heads:
- BluePrint Aluminum Cylinder Heads -HP9008
60cc chamber
2.02" intake/1.60" exhaust valves
190cc intake/60cc exhaust runners
Cam Specs:
- Roller Cam
.533 Intake / .544 Exhaust
215 Intake / 220 Exhaust Duration
@ .050 - 114 Degree Lobe Separation
Ignition Timing:
- 10-16 degrees initial, 32-34 total
Also Includes:
- Front Sump Oil Pan
Valve Covers
Timing Cover - Distributor
- Carburetor
- Spark Plugs and Wires
- Waterpump
- Harmonic Balancer
- Installed Complete Black front accessory Drive. WP, Alt, P/S, A/C, all belts and pulleys.
-
Dyno test results shipped with engine
Warranty:
- 30 month / 50,000 mile
Notes:
- Engine requires a V-belt standard rotation water pump and belt system
-
Engine timing cover is designed for standard rotation water pump ONLY
- This engine is an excellent cruiser and daily driver engine. This engine makes up to 16 inches of vacuum, and is designed to work excellent with power brakes, stock torque converter, stock gearing, and run on 87 octane fuel
Your BluePrint engine was dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet.
Part Number: BP302CTCKB
Fuel Delivery Type: Carbureted, 600cfm
Spark Plug: BPP7938 (BKR5E/7938)
Spark Plug Gap: .035"
Harmonic Balancer: BPP50 - 50 Ounce, 6.4" Diameter
Flexplate/Flywheel: 50 Ounce Weighted
Stall Converter: OEM-1800 rpm
Intake Manifold: Single plane
Fuel Recommendation: 87 Octane
Timing (Initial/Total Advance): Initial timing - 10-16° and Total timing 32-34°
Firing Order: 1,3,7,2,6,5,4,8
Notes: Not for EGR - Engine requires a V-belt standard rotation water pump and belt system.
Recommended Break in Oil : BPP710 (Click Here)
Recommended Service Oil : BPP10W30 (Click Here)
Recommended Oil Filter ; BPP51515 (Click Here)
Total Oil capacity with production oil pan, and Correct BPP51515 Filter : 5 Quarts
Click here to download a copy of the Installation Guide that came with your BluePrint engine.