GM SB Compatible 427 c.i. ProSeries Engine and 700R4 Automatic Transmission - 540 HP - Standard Edition Builder Series with Polished Pulley Kit - Fuel Injected

GM SB Compatible 427 c.i. ProSeries Engine and 700R4 Automatic Transmission - 540 HP - Standard Edition Builder Series with Polished Pulley Kit - Fuel Injected

SKU: B427FK700

GM SB Compatible 427 c.i. ProSeries Engine and 700R4 Automatic Transmission - 540 HP - Standard Edition Builder Series with Polished Pulley Kit - Fuel Injected

SKU: B427FK700

HP & Torque: 540 HP / 535 FT. LBS

Cylinder Heads: BluePrint Engines Aluminum Cylinder Heads

Compression Ratio: 10:1

Camshaft: Hydraulic Roller Cam - .577 Intake / .577 Exhaust Lift and 240 Intake / 248 Exhaust Duration @ .050 – 112 LSA

Pistons: Forged

Crankshaft: Forged Steel Crank –
4.000" Stroke and Forged 6.000" Rods

Regular price $20,999.00
/
  • Secure payments
  • Financing available at checkout with Affirm

Description:

  • HP & Torque: 540 HP / 535 FT LBS
  • Compression Ratio: 10.0:1
  • Aluminum Heads
  • Hydraulic Roller Cam
  • Forged Crank
  • Forged Pistons

Block:

  • NEW BluePrint Cast Iron Block
  • Manufactured and Machined in the USA!
  • 4-Bolt Main
  • 4.125" Bore
  • 1-Piece Rear Main Seal
  • Mech fuel pump provision: Yes
  • Passenger Side Dipstick
  • Drilled and tapped for clutch linkage

Rotating Assembly:

  • New BluePrint Forged Crankshaft
  • 4.000" Stroke
  • Forged 6.000" connecting rods
  • Forged Pistons
  • Internal Front/ Internal Rear

Cylinder Heads:

  • BluePrint Aluminum Cylinder Heads - HP8103
  • 64cc chamber
  • 2.08" intake/1.60" exhaust valves
  • 220cc intake/67cc exhaust runners

Cam Specs:

  • Cam Type: Roller
  • .577 Intake .577 Exhaust
  • 240 Intake / 248 Exhaust duration
  • @ .050 - 112-degree lobe separation

Ignition Timing:

  • Initial timing - 10-16° and Total timing 32-34°

Also Includes:

  • Satin Aluminum Intake Manifold 
  • Complete EFI System
  • Valve covers, oil pan and timing cover
  • Spark plugs & wires
  • Thermostat and thermostat housing
  • Installed complete front accessory drive with A/C and P/S
  • EFI Fuel Pump Kit

Assembled with Complete 700R4 Automatic Transmission Package:

  • 700R4 Complete Package
  • 2200-2400 Stall Torque converter
  • Flex plate
  • Starter

Notes:

  • Not for use in pollution-controlled vehicles.
  • Due to numerous tire/rear gear combinations, This transmission does NOT ship with a speedometer gear, or sender housing. 
  • The performance aluminum cylinder heads on this engine feature a .500 raised port vs OEM.

Your BluePrint engine was dyno tested with the parts and specifications listed below.  If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet.

Part Number: B427FK700

Fuel Delivery Type: Fuel Injected

Spark Plug: BPP7938 NGK 7938 BKR5E (.750 inch reach, 14mm thread, 5/8 hex, plug)

Spark Plug Gap: .035"

Harmonic Balancer: Non-Weighted

Flexplate/Flywheel: Non-weighted

Stall Converter: 2200+

Intake Manifold: N/A

Fuel Recommendation: 91 Octane

Timing (Initial/Total Advance): Initial timing - 10-16° and Total timing 32-34°

Firing Order: 1,8,4,3,6,5,7,2

Notes: New BluePrint block manufactured and machined in the USA. Recommended break in oil for your BluePrint Crate Engine: BPP710, Not for EGR

Header Partners: 
Click here for our Header Partners and recommendations.

Click here to download a copy of the Installation Guide that came with your BluePrint engine.

BETTER THAN THE REST.

The satisfaction of our customers is our highest priority at BluePrint Engines. We use quality components to balance your engine's rotating assembly within two grams of spec. We dyno test your crate engine and certify that it's ready to deliver horsepower and torque.

We give your BluePrint engine the industry's best-in-class warranty for 30-months / 50,000 miles — with the extra confidence only BluePrint can provide. Our warranty applies to individual or professional installations and is fully transferable.

For a detailed overview of our warranty, click here.

IT ALL COMES DOWN TO RESULTS.

We make sure we hit our target horsepower and proper torque with every crate engine. We use an advanced computerized balancer to get our rotating assemblies within two grams, ensuring silky smooth power over the entire RPM range. That's precisely why our engines sound and run better than our competitors.

BRAGGING RIGHTS INCLUDED!

A comprehensive, dyno-generated printout showing these critical specs will accompany your delivered engine. No more guessing or wondering what your installed engine's real-world peak horsepower and torque ratings actually are. Any doubters in the crowd? Simply flash 'em your dyno results!

This engine will be dyno tested before it ships to you at no additional charge (others charge $500)!

Customer Reviews

Based on 2 reviews Write a review
RECOMMENDED PRODUCTS:
BluePrint Engines Crate Engine Break-In Oil — 1 Quart
$9.95
BluePrint Engines 10w30 Engine Oil - 1 Quart
$9.95
TrueBlue Performance Octane Boost
BluePrint Engines TrueBlue Performance Octane Booster
$29.95
GM SB and BB Compatible Oil Filter
$12.95
Liquid Filled Fuel Pressure Gauge - 0-100 PSI
$18.99