Ford Small Block Compatible 302 c.i. Engine and 4R70W Automatic Transmission - 365 Horsepower - Bronco Edition Builder Series - Black Pulley Kit - Carbureted
Ford Small Block Compatible 302 c.i. Engine and 4R70W Automatic Transmission - 365 Horsepower - Bronco Edition Builder Series - Black Pulley Kit - Carbureted

Ford Small Block Compatible 302 c.i. Engine and 4R70W Automatic Transmission - 365 Horsepower - Bronco Edition Builder Series - Black Pulley Kit - Carbureted

SKU: B302KB4WDB

Ford Small Block Compatible 302 c.i. Engine and 4R70W Automatic Transmission - 365 Horsepower - Bronco Edition Builder Series - Black Pulley Kit - Carbureted

SKU: B302KB4WDB

Horsepower & Torque: 365 Horsepower / 365 ft. lbs. Torque

Cylinder Heads: BluePrint Engines Aluminum Cylinder Heads

Compression Ratio: 9.5:1

Camshaft: Hydraulic Roller Cam - .533 Intake / .544 Exhaust and 215 Intake / 220 Exhaust Duration @ .050 - 114 LSA

Pistons: Hypereutectic

Crankshaft: Cast Crank - 3.000" Stroke and Forged 5.090" Rods

Fuel Recommendation: 87+ Octane

Regular price $18,699.00
/
  • Secure payments
  • Financing available at checkout with Affirm

Description: 

  • Horsepower & Torque: 365 Horsepower / 365 ft. lbs. Torque
  • Compression Ratio: 9.5:1
  • Aluminum Heads
  • Hydraulic Roller Cam
  • Hypereutectic Pistons

Block:

  • BluePrint Engines High Strength Cast Iron Block
  • Increased Deck Thickness and Strength Webbing
  • Priority Main Oiling
  • 4.000" Bore
  • 4-Bolt Main
  • 1-Piece Rear Main Seal
  • Improved Water Jacket Design

Rotating Assembly:

  • Cast Crankshaft
  • 3.000" Stroke
  • OEM Type 5.090" Connecting Rods
  • Hypereutectic Pistons
  • 50oz Externally Balanced

Cylinder Heads:

  • BluePrint Aluminum Cylinder Heads - HP9009
  • 60cc Chamber
  • 2.02" Intake / 1.60" Exhaust Valves
  • 190cc Intake / 60cc Exhaust Runners

Cam Specs:

  • Cam Type: Roller
  • .533 Intake / .544 Exhaust Lift
  • 215 Intake / 220 Exhaust Duration
  • @.050-114 Degree Lobe Separation

Ignition Timing:

  • 34 Degrees Total at 3500 RPM

Also Includes:

  • Holley 600 CFM Street Warrior Carburetor - BPP080457SA
  • Dual Plane, Satin Aluminum Intake Manifold
  • Distributor
  • Valve Covers
  • Dual/Rear Sump Oil Pan
  • Electric Fuel Pump Included
  • Thermostat and Thermostat Housing
  • Black Front Accessory Drive - BPP302FDACPS4BK
    • Driver Side Standard Rotation Water Pump
    • Type II Power Steering Pump
    • Remote Power Steering Pump Reservoir
    • 140amp 1-wire Alternator
    • 7B10 Peanut Air Conditioning Compressor

Assembled with Complete 4R70W 4WD Ready – Automatic Trans Package:

  • Includes Electronic Transmission Controller
  • THROTTLE POSITION SENSOR NOT INCLUDED
  • Transmission Built to 650 HP
  • 2200-2600 Stall Torque Converter
  • Flex Plate
  • Starter
  • 4 Speed, Overdrive Transmission w/Lockup
  • Specifically Prepped for Dana 20 Transfer Case (1966-1976). Transfer case is NOT included
  • GEAR RATIOS
    • First: 2.84 :1.
    • Second: 1.55 :1.
    • Third: 1.00 :1.
    • Overdrive: 0.70 :1.
    • Reverse: 2.32 :1.

Notes:

  • Does not include TPS sensor, as varies with each install. 
  • Package Ships assembled.
  • Note that 4R70W transmission may require modifications/replacement of driveshaft, transmission mount, exhaust routing, etc. 
  • The front accessory drive on this engine fits many vehicles, however it is the customer responsibility to accurately measure and confirm fitment.  Note this is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles.
 

    Your BluePrint engine was dyno tested with the parts and specifications listed below.  If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet.

    Part Number: B302KB4WDB

    Fuel Delivery Type: 600 CFM carburetor

    Spark Plug: BPP7938 NGK 7938 BKR5E (.750 inch reach, 14mm thread, 5/8 hex, plug)

    Spark Plug Gap: .035"

    Harmonic Balancer: BPP50 50 oz

    Flexplate/Flywheel: 50 Ounce Weighted

    Stall Converter: 1800-2200 rpm

    Intake Manifold: Dual plane, satin aluminum

    Fuel Recommendation: 87+ Octane Approved

    Timing (Initial/Total Advance): Initial timing - 10-16° and Total timing 32-34°

    Firing Order: 1,3,7,2,6,5,4,8

    Recommended Break in Oil: BPP710 (Click Here)

    Recommended Service Oil: BPP10W30 (Click Here)

    Recommended Oil Filter: BPP21085 or BPP51515 (Click Here)

    Header Partners: 
    Click here for our Header Partners and recommendations.

    Click here to download a copy of the Installation Guide that came with your BluePrint engine.

    BETTER THAN THE REST.

    At BluePrint Engines, customer satisfaction is our highest priority. Every engine is built using high-quality components, with each rotating assembly balanced to within two grams of specification. Before shipment, every crate engine is dyno tested and certified to ensure it is ready to deliver the horsepower and torque you expect.

    To stand behind that level of quality, BluePrint Engines offers industry-leading warranty coverage, providing confidence and peace of mind whether the engine is installed by an individual or a professional installer. Our standard warranty is fully transferable, adding long-term value and reassurance for our customers.

    Warranty Coverage Details:

    • BluePrint Engines (including Builder Series)- Standard Warranty 30 months or 50,000 miles (parts and labor)*
    • BluePrint Engines Extended Warranty- 48 months or unlimited miles (parts and labor)*
    • Race / Motorsports Engines -No warranty
    • Marine Engines- 12 months (parts and labor)
    • Short Blocks-12 months (parts only)
    • Bare Blocks- 6-Month Unaltered
    • International Sales- Warranty coverage is handled by the in-country distributor

    *Applies to eligible engine part numbers beginning with “B” or “P.” Warranty coverage is subject to terms and conditions. Proper installation and maintenance are required.

    Please refer to full warranty documentation for complete details click here.

    IT ALL COMES DOWN TO RESULTS.

    We make sure we hit our target horsepower and proper torque with every crate engine. We use an advanced computerized balancer to get our rotating assemblies within two grams, ensuring silky smooth power over the entire RPM range. That's precisely why our engines sound and run better than our competitors.

    BRAGGING RIGHTS INCLUDED!

    A comprehensive, dyno-generated printout showing these critical specs will accompany your delivered engine. No more guessing or wondering what your installed engine's real-world peak horsepower and torque ratings actually are. Any doubters in the crowd? Simply flash 'em your dyno results!

    This engine will be dyno tested before it ships to you at no additional charge (others charge $500)!

    RECOMMENDED PRODUCTS:
    BluePrint Engines Crate Engine Break-In Oil — 1 Quart
    $11.99
    BluePrint Engines 10w30 Engine Oil - 1 Quart
    $10.95
    TrueBlue Performance Octane Boost
    BluePrint Engines TrueBlue Performance Octane Booster
    $34.99
    BluePrint Engines TrueBlue UltraCool Antifreeze Coolant CONCENTRATE
    $24.99
    BluePrint Engines TrueBlue Power Steering Fluid
    $9.99
    BluePrint Engines TrueBlue Transmission Fluid UNIVERSAL ATF/MTF
    $10.99
    Chrysler and Ford SB Compatible Oil Filter - Standard Size
    $16.99
    Liquid Filled Fuel Pressure Gauge - 0-15 psi
    $19.99
    Chrysler and Ford Small Block Compatible Oil Filter - Space Saver Size
    $16.99
    BluePrint Engines Ford Oil Pressure Extension 1/4 NPT with 1/8 NPT Port
    $29.99