BC408K727 engine
BC408K727 side
Chrysler Small Block Compatible 408 c.i. Engine and 727 Automatic Transmission - 465 Horsepower - Standard Edition Builder Series with Polished Pulley Kit - Carbureted
Chrysler Small Block Compatible 408 c.i. Engine and 727 Automatic Transmission - 465 Horsepower - Standard Edition Builder Series with Polished Pulley Kit - Carbureted
BC408K727 engine
BC408K727 side
Chrysler Small Block Compatible 408 c.i. Engine and 727 Automatic Transmission - 465 Horsepower - Standard Edition Builder Series with Polished Pulley Kit - Carbureted
Chrysler Small Block Compatible 408 c.i. Engine and 727 Automatic Transmission - 465 Horsepower - Standard Edition Builder Series with Polished Pulley Kit - Carbureted

Chrysler Small Block Compatible 408 c.i. Engine and 727 Automatic Transmission - 465 Horsepower - Standard Edition Builder Series with Polished Pulley Kit - Carbureted

SKU: BC408K727

Chrysler Small Block Compatible 408 c.i. Engine and 727 Automatic Transmission - 465 Horsepower - Standard Edition Builder Series with Polished Pulley Kit - Carbureted

SKU: BC408K727

Horsepower & Torque: 465 Horsepower / 494 FT. LBS. Torque

Cylinder Heads: BluePrint Engines Aluminum Cylinder Heads

Compression Ratio: 10:1

Camshaft: Hydraulic Roller Cam - .544 Intake / .541 Exhaust Lift and 236 Intake / 242 Exhaust Duration @ .050 – 110 LSA

Pistons: Forged

Crankshaft: Cast Crank – 4.000" Stroke and Forged 6.123" Rods

/
  • Secure payments
  • Financing available at checkout with Affirm

Description:

  • Horsepower & Torque: 465 Horsepower / 494 FT. LBS. Torque
  • Compression Ratio: 10:1
  • Aluminum Heads
  • Roller Cam
  • Cast Crank
  • Forged Pistons

Block:

  • Hand-Picked Seasoned Magnum Block
  • Square and Parallel Decked
  • Align Honed Main Bearing Bore
  • Cylinders Honed on Computer Controlled Machine to Within .0002 Straightness and Roundness
  • Cylinders are Sonic Tested for Thickness
  • 2-Bolt Main
  • 4.040" Bore
  • 2-Piece Rear Main Seal
  • Mech Fuel Pump Provision: Yes

Rotating Assembly:

  • Cast Crankshaft
  • 4.000" Stroke
  • Forged Magnum 6.123" Connecting Rods w/ 150,000 PSI Bolts
  • Forged Pistons
  • Externally Balanced Front and Rear

Cylinder Heads:

  • BluePrint Engines Assembled and Machined Edelbrock 61769 Casting
  • Aluminum Magnum Pattern Cylinder Heads - 58cc chamber
  • Aluminum Roller Rockers
  • 2.02" intake / 1.60" Exhaust Valves
  • 176cc intake / 75cc Exhaust Runners

Cam Specs:

  • Cam Type: Roller
  • .544 Intake / .541 Exhaust Lift
  • 236 Intake / 242 Exhaust Duration
  • @.050-110 Degree Lobe Separation

Ignition Timing:

  • 34 Degrees Total at 4000 RPM

Also Includes:

  • Valve Covers
  • Oil Pan
  • Timing Cover
  • Holley 750 cfm Carburetor
  • Water Pump
  • Spark Plugs and Wires
  • Distributor
  • Water Neck
  • Thermostat and Thermostat Housing
  • Fuel Pump and Fuel Line
  • Harmonic Balancer
  • Air Cleaner
  • Front Accessory Drive with Alternator, A/C Compressor, Power Steering Pump, and Water Pump 
  • Performance 727 Transmission with 2200-2600 Stall.
  • 10-inch Torque Converter
  • Performance Built Transmission
  • Starter

Notes:

  • The front accessory drive on this engine fits many vehicles, however it is the customer responsibility to accurately measure and confirm fitment.  Note this is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles.
  • Non-A/C front accessory drives are also available. 
 

Your BluePrint engine was dyno tested with the parts and specifications listed below.  If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet. 

Part Number: BC408K727

Fuel Delivery Type: Carbureted, 750cfm

Spark Plug: BPP7938 NGK 7938 BKR5E (.750 inch reach, 14mm thread, 5/8 hex, plug)

Spark Plug Gap: .035"

Harmonic Balancer: 360 EXTERNALLY BALANCED '93-'97, 7.25" Diameter

Flexplate/Flywheel: LA 360, (Pre-Magnum) such as BPP727360 if paired with 727 transmission.

Stall Converter: 2200 - 2600 rpm

Intake Manifold: Dual plane, satin aluminum

Fuel Recommendation: 91 Octane

Timing (Initial/Total Advance): Initial timing - 10-16° and Total timing 32-34°

Firing Order: 1,8,4,3,6,5,7,2

Recommended Break in Oil : BPP710 (Click Here)

Recommended Service Oil : BPP10W30 (Click Here) 

Recommended Oil Filter ; BPP51515 (Click Here)

Total Oil capacity with production oil pan, and Correct BPP51515 Filter : 5 Quarts

Header Partners: 
Click here for our Header Partners and recommendations.

Click here to download a copy of the Installation Guide that came with your BluePrint engine.

BETTER THAN THE REST.

The satisfaction of our customers is our highest priority at BluePrint Engines. We use quality components to balance your engine's rotating assembly within two grams of spec. We dyno test your crate engine and certify that it's ready to deliver horsepower and torque.

We give your BluePrint engine the industry's best-in-class warranty for 30-months / 50,000 miles — with the extra confidence only BluePrint can provide. Our warranty applies to individual or professional installations and is fully transferable.

For a detailed overview of our warranty, click here.

IT ALL COMES DOWN TO RESULTS.

We make sure we hit our target horsepower and proper torque with every crate engine. We use an advanced computerized balancer to get our rotating assemblies within two grams, ensuring silky smooth power over the entire RPM range. That's precisely why our engines sound and run better than our competitors.

BRAGGING RIGHTS INCLUDED!

A comprehensive, dyno-generated printout showing these critical specs will accompany your delivered engine. No more guessing or wondering what your installed engine's real-world peak horsepower and torque ratings actually are. Any doubters in the crowd? Simply flash 'em your dyno results!

This engine will be dyno tested before it ships to you at no additional charge (others charge $500)!

RECOMMENDED PRODUCTS:
BluePrint Engines Crate Engine Break-In Oil — 1 Quart
BluePrint Engines 10w30 Engine Oil - 1 Quart
TrueBlue Performance Octane Boost
BluePrint Engines TrueBlue Performance Octane Booster
BluePrint Engines TrueBlue UltraCool Antifreeze Coolant CONCENTRATE
BluePrint Engines TrueBlue Power Steering Fluid
BluePrint Engines TrueBlue Transmission Fluid UNIVERSAL ATF/MTF
Chrysler and Ford SB Compatible Oil Filter - Standard Size
Liquid Filled Fuel Pressure Gauge - 0-15 psi