Chrysler Hemi Compatible 426 c.i. Engine and 4L65/70E Automatic Transmission - 610 Horsepower - Standard Edition Builder Series - Polished Pulley Kit - Fuel Injected
Chrysler Hemi Compatible 426 c.i. Engine and 4L65/70E Automatic Transmission - 610 Horsepower - Standard Edition Builder Series - Polished Pulley Kit - Fuel Injected
Chrysler Hemi Compatible 426 c.i. Engine and 4L65/70E Automatic Transmission - 610 Horsepower - Standard Edition Builder Series - Polished Pulley Kit - Fuel Injected
Chrysler Hemi Compatible 426 c.i. Engine and 4L65/70E Automatic Transmission - 610 Horsepower - Standard Edition Builder Series - Polished Pulley Kit - Fuel Injected

Chrysler Hemi Compatible 426 c.i. Engine and 4L65/70E Automatic Transmission - 610 Horsepower - Standard Edition Builder Series - Polished Pulley Kit - Fuel Injected

SKU: B426K4L7

Chrysler Hemi Compatible 426 c.i. Engine and 4L65/70E Automatic Transmission - 610 Horsepower - Standard Edition Builder Series - Polished Pulley Kit - Fuel Injected

SKU: B426K4L7

Horsepower & Torque: 610 Horsepower / 525 FT. LBS. Torque

Cylinder Heads: Gen III Hemi Apache Aluminum Cylinder Heads

Compression Ratio: 10.48:1

Camshaft: Hydraulic Roller Cam - .610 Intake / .611 Exhaust Lift and 231 Intake / 255 Exhaust Duration @.050-113° LSA

Pistons: Forged

Crankshaft: Forged Steel Crank - 4.050" Stroke and Forged 6.125" Connecting Rods

Fuel Recommendation: 91+ Octane

/
  • Secure payments
  • Financing available at checkout with Affirm

Overview:

This BluePrint Engines Gen III HEMI crate engine with a complete 4L65/70E four-speed automatic transmission is a fully integrated, high-performance powertrain solution delivering 610 horsepower and 525 ft-lbs. of torque with a reliable 10.48:1 compression ratio. Built with a forged crank, forged pistons, and a hydraulic roller cam, and topped with Gen III HEMI Apache aluminum cylinder heads and a fabricated intake manifold, this engine combines modern muscle with proven durability. Fuel injection, a throttle body, and Holley Terminator ECU controller kit and wiring harness provide advanced electronic control and drivability, while key components like spark plugs, coils, harmonic balancer, timing cover, valve covers, and a muscle car-style mid-sump oil pan ensure it's ready for swap applications. The polished front accessory drive includes a water pump, Type II power steering pump with remote reservoir, 140-amp 1-wire alternator, and 7B10 peanut-style A/C compressor, delivering both function and show-quality looks. Paired with a robust overdrive transmission, this crate engine package is ideal for street cruisers, resto-mods, and pro-touring builds needing modern HEMI performance in a complete, turn-key setup.

Description:

  • Horsepower & Torque: 610 Horsepower / 525 ft. lbs. Torque
  • Compression Ratio: 10.48:1
  • Gen III Hemi Apache Aluminum Cylinder Heads
  • BluePrint Engines Hydraulic Roller Cam
  • BluePrint Engines Forged Crank
  • BluePrint Engines Forged Pistons

Block:

  • Engine Manufactured and Machined in the USA!
  • NEW “BGE” Hellcat Engine Block
  • 4-Bolt Main
  • 4.090" Bore
  • 1-Piece Rear Main Seal

Rotating Assembly:

  • Forged Steel Crank
  • 4.050" Stroke
  • 6.125" Connecting Rods
  • Forged Pistons
  • Internally Balanced Front and Rear

Cylinder Heads:

  • Gen III Hemi Apache Aluminum Cylinder Heads
  • 73cc Chamber
  • 2.140" Intake / 1.650" Exhaust Valves

Cam Specs:

  • Hydraulic Roller Cam
  • .610 Intake / .611 Exhaust Lift
  • 231 Intake / 255 Exhaust Duration
  • @.050-113 Degree Lobe Separation

Ignition Timing:

  • Controlled by ECU

Also Includes:

  • Fuel Injection
  • Throttle Body
  • Harmonic Balancer
  • Fabricated Intake Manifold
  • Muscle Car Style - Mid Sump Swap Oil Pan
  • Spark Plugs
  • Coil
  • Timing Cover
  • Valve Covers
  • Holley Terminator ECU Controller Kit and Wiring Harness
  • Polished Front Accessory Drive 
    • Water Pump
    • Type II Power Steering Pump
    • Remote Power Steering Pump Reservoir
    • 140amp 1-wire Alternator
    • 7B10 Peanut Style Air Conditioning Compressor

Assembled with Complete 4L65/70E Four Speed Automatic Transmission Package:

  • 4L65/70E Complete Package
  • Electronic Transmission Controller Include
  • 2200-2400 Stall Torque Converter
  • Flex Plate
  • Starter

Notes:

  • Features 2013+ 58X reluctor wheel
  • 2009+ crankshaft spacing
  • 2009+ car timing cover
  • VVT locked out
  • MDS – eliminated

Your BluePrint engine was dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet. 

Fuel Delivery Type: Fuel Injected

Spark Plug: NGK 97408/ LZTR6AP11EG

Spark Plug Gap: .043"

Harmonic Balancer: Non-Weighted

Flexplate/ Flywheel: Non-Weighted

Stall Converter: 2500+

Intake Manifold: Fabricated Aluminum Gen III HEMI

Fuel Recommendation: 91+ Octane Approved

Timing: Controlled by ECU

Firing Order: 1-8-4-3-6-5-7-2

Recommended Break-in Oil: BPP710

Recommended Service Oil: BPP10W30

Recommended Oil Filter: BPPB160

Total Oil Capacity with Production Oil Pan: 6 QT.

Header Partners: Click here for our Header Partners and recommendations

Click here to download a copy of the Installation Guide that came with your BluePrint engine.

BETTER THAN THE REST.

The satisfaction of our customers is our highest priority at BluePrint Engines. We use quality components to balance your engine's rotating assembly within two grams of spec. We dyno test your crate engine and certify that it's ready to deliver horsepower and torque.

We give your BluePrint engine the industry's best-in-class warranty for 30-months / 50,000 miles — with the extra confidence only BluePrint can provide. Our warranty applies to individual or professional installations and is fully transferable.

For a detailed overview of our warranty, click here.

IT ALL COMES DOWN TO RESULTS.

We make sure we hit our target horsepower and proper torque with every crate engine. We use an advanced computerized balancer to get our rotating assemblies within two grams, ensuring silky smooth power over the entire RPM range. That's precisely why our engines sound and run better than our competitors.

BRAGGING RIGHTS INCLUDED!

A comprehensive, dyno-generated printout showing these critical specs will accompany your delivered engine. No more guessing or wondering what your installed engine's real-world peak horsepower and torque ratings actually are. Any doubters in the crowd? Simply flash 'em your dyno results!

This engine will be dyno tested before it ships to you at no additional charge (others charge $500)!

RECOMMENDED PRODUCTS:
BluePrint Engines Crate Engine Break-In Oil — 1 Quart
BluePrint Engines 10w30 Engine Oil - 1 Quart
TrueBlue Performance Octane Boost
BluePrint Engines TrueBlue Performance Octane Booster
BluePrint Engines TrueBlue UltraCool Antifreeze Coolant CONCENTRATE
BluePrint Engines TrueBlue Power Steering Fluid
BluePrint Engines TrueBlue Transmission Fluid UNIVERSAL ATF/MTF
Gen IV LS and 2009+ Gen III Hemi Compatible Oil Filter
EFI Billet Aluminum Fuel Pressure Bypass Regulator - 40-75 PSI and -6AN ORB
EFI Billet Aluminum Fuel Pressure Bypass Regulator - 40-75 PSI and -10AN ORB - Black
Liquid Filled Fuel Pressure Gauge - 0-100 PSI
EFI Fuel Pump and Plumbing Kit BPP5267 - For Fuel injected engines
BluePrint Engines EFI In-Tank Retrofit Fuel Pump - 450 LPH - Return Style
Muscle car swap LS and Hemi Universal Air Intake Kit