- HP & Torque: 341 HP / 371 FT LBS
- Compression Ratio: 9:1
- Aluminum Heads
- Hydraulic Roller Cam
- Cast Iron Crankshaft
- Hypereutectic Pistons
- NEW BluePrint Cast Iron Block
- Manufactured and Machined in the USA!
- 4-Bolt Main
- 4.000" Bore
- 1-Piece Rear Main Seal
- Mech fuel pump provision: Yes
- Passenger Side Dipstick
- Drilled and tapped for clutch linkage
- Cast Iron Crankshaft
- 3.480" Stroke
- Forged 5.700" connecting rods
- Hypereutectic pistons
- Internal Front/ External Rear engine balance
- BluePrint Aluminum Cylinder Heads - H8002K
- 64cc chamber
- 2.02" intake/1.60" exhaust valves
- 195cc intake/75cc exhaust runners
- Cam Type: Roller
- .477 Intake .471 Exhaust
- 202 Intake / 212 Exhaust duration
- @ .050 - 115-degree lobe separation
- 32 Degrees Total at 3500 RPM
- Valve covers
- Oil pan
- Timing cover
- Aluminum intake
- HEI distributor
- Spark plugs and wires
- 600 cfm carburetor
- Mechanical fuel pump
- Water neck
- Thermostat and thermostat housing
- Front Accessory Drive with Water Pump, A/C Compressor, Alternator, and
- Power Steering Pump (Does not fit Corvette)
- This engine is an excellent cruiser and daily driver engine. This engine makes up to 18 inches of vacuum, and is designed to work excellent with power brakes, stock torque converter, stock gearing, and run on 87 octane fuel
- The performance aluminum cylinder heads on this engine feature a .500 raised port vs OEM.
Engine Accessory Specifications
BETTER THAN THE REST.
The satisfaction of our customers is our highest priority at BluePrint Engines. We use quality components to balance your engine's rotating assembly within two grams of spec. We dyno test your crate engine and certify that it's ready to deliver horsepower and torque.
We give your BluePrint engine the industry's best-in-class warranty for 30-months / 50,000 miles — with the extra confidence only BluePrint can provide. Our warranty applies to individual or professional installations and is fully transferable.
For a detailed overview of our warranty, click here.
IT ALL COMES DOWN TO RESULTS.
We make sure we hit our target horsepower and proper torque with every crate engine. We use an advanced computerized balancer to get our rotating assemblies within two grams, ensuring silky smooth power over the entire RPM range. That's precisely why our engines sound and run better than our competitors.
BRAGGING RIGHTS INCLUDED!
A comprehensive, dyno-generated printout showing these critical specs will accompany your delivered engine. No more guessing or wondering what your installed engine's real-world peak horsepower and torque ratings actually are. Any doubters in the crowd? Simply flash 'em your dyno results!
This engine will be dyno tested before it ships to you at no additional charge (others charge $500)!