BluePrint Engines 350CI Lowrider® Crate Engine | Small Block GM Style | Dressed Longblock with Fuel Injection | Iron Heads | Flat Tappet Cam

$4,895.00
This engine will be dyno tested before it ships to you at no additional charge (others charge $500)!
Part #: BP3501LRCTF1

Description

Dyno Tested Warranty
  • HP & Torque: 332 HP / 359 FT LBS
    Compression Ratio: 9.5:1
    Cast Iron Heads
    Flat Tappet Cam
    Cast Steel Crank
    Hypereutectic Pistons

Block:

  • Hand picked seasoned block
    Square and parallel decked
    Align honed main bearing bore
    Cylinders honed on computer controlled machine to within .0002 straightness and roundness
    Cylinders are sonic tested for thickness
    4-Bolt Main
    4.000" Bored .040" Over
    1-Piece Rear Main Seal
    Mech fuel pump provision: Yes
    Passenger Side Dipstick
  • Drilled and tapped for clutch linkage

Rotating Assembly:

  • Cast steel crankshaft
    3.480" Stroke
    OEM type 5.700" connecting rods w/ 150,000 psi bolts
    Hypereutectic pistons
    Internal Front/ External Rear

Cylinder Heads:

  • Cast iron heads; 64cc chamber
    Hardened retainers and springs
    2.02 swirl polished intake valves
    1.60 swirl polished exhaust valves

Cam Specs:

  • Cam Type: Flat Tappet
    .480 Intake .486 Exhaust
    224 Intake / 230 Exhaust duration
    @ .050 - 110 degree lobe separation
    Using 1.5 rockers

Ignition Timing:

  • 10-16 degrees initial, 32-34 total

Also Includes:

  • Polished Aluminum Lowrider® engraved valve covers
    EFI System
    Intake Manifold; RPM Air Gap; Endurashine® polished aluminum
    Chrome air cleaner
    HEI Distributor
    Harmonic balancer
    Oil pan
    Timing cover
    Dyno test results shipped with engine

Warranty:

  • 30 month / 50,000 mile

Notes:

  • Zinc Additive Required For Flat Tappet Application
    Recommended Oil For Your BluePrint Crate Engine: BPP710, BluePrint Engines break in oil
    Not for EGR
  • Engine package does not include fuel pump.
    Engine is configured to run in fuel only mode.

Yellow Exclamation Triangle WARNING: Cancer and Reproductive Harm-
www.P65Warnings.ca.gov

This engine will be dyno tested before it ships to you at no additional charge (others charge $500)!
Part #: BP3501LRCTF1

Description

Dyno Tested Warranty
  • HP & Torque: 332 HP / 359 FT LBS
    Compression Ratio: 9.5:1
    Cast Iron Heads
    Flat Tappet Cam
    Cast Steel Crank
    Hypereutectic Pistons

Block:

  • Hand picked seasoned block
    Square and parallel decked
    Align honed main bearing bore
    Cylinders honed on computer controlled machine to within .0002 straightness and roundness
    Cylinders are sonic tested for thickness
    4-Bolt Main
    4.000" Bored .040" Over
    1-Piece Rear Main Seal
    Mech fuel pump provision: Yes
    Passenger Side Dipstick
  • Drilled and tapped for clutch linkage

Rotating Assembly:

  • Cast steel crankshaft
    3.480" Stroke
    OEM type 5.700" connecting rods w/ 150,000 psi bolts
    Hypereutectic pistons
    Internal Front/ External Rear

Cylinder Heads:

  • Cast iron heads; 64cc chamber
    Hardened retainers and springs
    2.02 swirl polished intake valves
    1.60 swirl polished exhaust valves

Cam Specs:

  • Cam Type: Flat Tappet
    .480 Intake .486 Exhaust
    224 Intake / 230 Exhaust duration
    @ .050 - 110 degree lobe separation
    Using 1.5 rockers

Ignition Timing:

  • 10-16 degrees initial, 32-34 total

Also Includes:

  • Polished Aluminum Lowrider® engraved valve covers
    EFI System
    Intake Manifold; RPM Air Gap; Endurashine® polished aluminum
    Chrome air cleaner
    HEI Distributor
    Harmonic balancer
    Oil pan
    Timing cover
    Dyno test results shipped with engine

Warranty:

  • 30 month / 50,000 mile

Notes:

  • Zinc Additive Required For Flat Tappet Application
    Recommended Oil For Your BluePrint Crate Engine: BPP710, BluePrint Engines break in oil
    Not for EGR
  • Engine package does not include fuel pump.
    Engine is configured to run in fuel only mode.

Yellow Exclamation Triangle WARNING: Cancer and Reproductive Harm-
www.P65Warnings.ca.gov

Your BluePrint engine was dyno tested with the parts and specifications listed below.  If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet.

 

Part Number: BP3501LRCTF1

Fuel Delivery Type: Fuel Injected

Spark Plug: AC Delco 41-993

Spark Plug Gap: .045"

Harmonic Balancer: Included, Non Weighted - 8" diameter

Flexplate/Flywheel: Late 350 Weighted

Stall Converter: 1800-2200 rpm

Intake Manifold: RPM Air Gap, Endurashine polished finish

Fuel Recommendation: 92 Octane

Timing (Initial/Total Advance): Initial timing - 10-16° and Total timing 32-34°

Firing Order: 1,8,4,3,6,5,7,2

Notes: BluePrint Break In oil recommended for engine break in. BPP710

 

Click here to download a copy of the Installation Guide that came with your BluePrint engine.

Check Out This Product and More On Our Pinterest Page