BluePrint Engines 383CI Stroker Crate Engine | Small Block GM Style | Longblock | Aluminum Heads | Roller Cam | Power Adder Ready

$6,030.00
Part #: BP38316CT1

Description

  • HP & Torque: 440 HP / 445 FT LBS
    Compression Ratio: 8.5:1
    Aluminum Heads
    Hydraulic Roller Cam
    Forged Crank
    Forged Pistons

Block:

  • Hand picked seasoned block
    Square and parallel decked
    Align honed main bearing bore
    Cylinders honed on computer controlled machine to within .0002 straightness and roundness
    Cylinders are sonic tested for thickness
    4-Bolt Main
    4.000" Bored .040" Over
    1-Piece Rear Main Seal
    Mech fuel pump provision: Yes
    Passenger Side Dipstick Drilled and tapped for clutch linkage

Rotating Assembly:

  • New BluePrint Forged Crankshaft
    3.750" Stroke
    Forged I-beam 5.700" connecting rods
    Forged Pistons
    Internal Front/ External Rear

Cylinder Heads:

  • BluePrint Aluminum Cylinder Heads - H8002K
    64cc chamber
    2.02" intake/1.60" exhaust valves
    195cc intake/75cc exhaust runners

Cam Specs:

  • Roller, .536 Intake
    .555 Exhaust
    224 Intake / 236 Exhaust duration
    @ .050 113 degree lobe separation

Ignition Timing:

  • 34 degrees total at 3500 RPM

Also Includes:

  • New valve covers
    Oil pan and timing cover
    Brass freeze plugs
    Dyno tested - shipped with results
    Warranty 30 month / 50,000 mileNotes
    This engine requires a non-weighted 8" harmonic balancer, and
    late 350ci
    weighted flexplate/flywheel.
    Please see Recommended Add On's page for additional parts.
    **Engine was designed as a Power Adder.
    The HP and Torque numbers came from us dyno testing with a 750cfm carb
    *A bronze distributor gear is NOT recommended on this engine
    Not for use in pollution controlled vehicles.

Warranty:

  • 30 month / 50,000 mile

Notes:

  • This engine requires a non-weighted 8" harmonic balancer, and late 350ci weighted flexplate/flywheel
    Please see Recommended Add On's page for additional parts.
    **Engine was designed as a Power Adder.
    The HP and Torque numbers came from us dyno testing with a 750cfm carb
    *A bronze distributor gear is NOT recommended on this engine
    Not for use in pollution controlled vehicles.

Part #: BP38316CT1

Description

  • HP & Torque: 440 HP / 445 FT LBS
    Compression Ratio: 8.5:1
    Aluminum Heads
    Hydraulic Roller Cam
    Forged Crank
    Forged Pistons

Block:

  • Hand picked seasoned block
    Square and parallel decked
    Align honed main bearing bore
    Cylinders honed on computer controlled machine to within .0002 straightness and roundness
    Cylinders are sonic tested for thickness
    4-Bolt Main
    4.000" Bored .040" Over
    1-Piece Rear Main Seal
    Mech fuel pump provision: Yes
    Passenger Side Dipstick Drilled and tapped for clutch linkage

Rotating Assembly:

  • New BluePrint Forged Crankshaft
    3.750" Stroke
    Forged I-beam 5.700" connecting rods
    Forged Pistons
    Internal Front/ External Rear

Cylinder Heads:

  • BluePrint Aluminum Cylinder Heads - H8002K
    64cc chamber
    2.02" intake/1.60" exhaust valves
    195cc intake/75cc exhaust runners

Cam Specs:

  • Roller, .536 Intake
    .555 Exhaust
    224 Intake / 236 Exhaust duration
    @ .050 113 degree lobe separation

Ignition Timing:

  • 34 degrees total at 3500 RPM

Also Includes:

  • New valve covers
    Oil pan and timing cover
    Brass freeze plugs
    Dyno tested - shipped with results
    Warranty 30 month / 50,000 mileNotes
    This engine requires a non-weighted 8" harmonic balancer, and
    late 350ci
    weighted flexplate/flywheel.
    Please see Recommended Add On's page for additional parts.
    **Engine was designed as a Power Adder.
    The HP and Torque numbers came from us dyno testing with a 750cfm carb
    *A bronze distributor gear is NOT recommended on this engine
    Not for use in pollution controlled vehicles.

Warranty:

  • 30 month / 50,000 mile

Notes:

  • This engine requires a non-weighted 8" harmonic balancer, and late 350ci weighted flexplate/flywheel
    Please see Recommended Add On's page for additional parts.
    **Engine was designed as a Power Adder.
    The HP and Torque numbers came from us dyno testing with a 750cfm carb
    *A bronze distributor gear is NOT recommended on this engine
    Not for use in pollution controlled vehicles.

Customer Reviews

Based on 1 review Write a review

Your BluePrint engine was dyno tested with the parts and specifications listed below.  If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet.

 

Part Number: BP38316CT1

Fuel Delivery Type: Carbureted

Spark Plug: AC Delco 41-629

Spark Plug Gap: .045"

Harmonic Balancer: BPP350 - Non Weighted, 8" diameter

Flexplate/Flywheel: Late 350 Weighted

Stall Converter: 2000-2400 rpm

Intake Manifold: N/A - 1986-EARLIER BOLT PATTERN

Fuel Recommendation: 91 Octane

Timing (Initial/Total Advance): Initial timing - 10-16° and Total timing 32-34°

Firing Order: 1,8,4,3,6,5,7,2

Notes: Power Adder engine. If a double keyway crank is required, the engine wil have to be special built. Recommended break in oil for your BluePrint Crate Engine: BPP710, Not for EGR

 

Click here to download a copy of the Installation Guide that came with your BluePrint engine.

Check Out This Product and More On Our Pinterest Page