BluePrint Engines 355CI Crate Engine | Small Block GM Style | Dressed Longblock with Carburetor | Aluminum Heads | Flat Tappet Cam

$3,950.00
Part #: BP35512CTC1

Description: 

  • HP & Torque: 375 HP / 400 FT LBS
  • Compression Ratio: 10.0:1
  • Aluminum Heads
  • Hypereutectic Pistons
  • Flat Tappet Cam
  • Cast Steel Crank

    Block:

    • 4-bolt main, 1-piece rear main seal
    • Passenger side dipstick
    • Align honed main bearing bore
    • Cylinders honed on computer controlled machine to within .0002 straightness and roundness
    • Cylinders are sonic tested for thickness

      Rotating Assembly:

      • BluePrint premium cast steel crankshaft
      • Hypereutectic pistons
      • Chevy heavy beam rods with 150,000 PSI bolts
      • Hastings moly rings
      • Melling high volume oil pump
      • Hydraulic flat tappet cam
      • Heavy duty double roller timing set

        Cylinder Heads:

        • BluePrint Performance aluminium
        • Hardened retainers and springs
        • 2.02 swirl polished intake valves
        • 1.60 swirl polished exhaust valves
        • BP Aluminum Head Part# H8002K

          Cam Specs:

          • Cam Type: Flat Tappet
          • .480 Intake .486 Exhaust
          • 229 Intake / 230 Exhaust duration @ .050

            Ignition Timing:

            • 34 degrees total at 3500 RPM

            Also Includes:

            • New valve covers
            • Oil pan
            • Timing cover
            • Aluminium intake
            • HEI distributor
            • 600 cfm carburetor
            • Brass freeze plugs
            • Dyno test results shipped with engine

              Warranty:

              • 30 month / 50,000 mile

              Notes:

              • Picture shown with optional tall, perimeter bolt valve covers.
              • This engine requires a non weighted harmonic balancer, and late 350ci weighted flexplate/flywheel.
              • BluePrint Engines recommends a 2000- 2400 rpm stall converter.
              • Recommended spark plugs are Champion 792 with .045" gap
              • Not for use in pollution controlled vehicles.

               

                Part #: BP35512CTC1

                Description: 

                • HP & Torque: 375 HP / 400 FT LBS
                • Compression Ratio: 10.0:1
                • Aluminum Heads
                • Hypereutectic Pistons
                • Flat Tappet Cam
                • Cast Steel Crank

                  Block:

                  • 4-bolt main, 1-piece rear main seal
                  • Passenger side dipstick
                  • Align honed main bearing bore
                  • Cylinders honed on computer controlled machine to within .0002 straightness and roundness
                  • Cylinders are sonic tested for thickness

                    Rotating Assembly:

                    • BluePrint premium cast steel crankshaft
                    • Hypereutectic pistons
                    • Chevy heavy beam rods with 150,000 PSI bolts
                    • Hastings moly rings
                    • Melling high volume oil pump
                    • Hydraulic flat tappet cam
                    • Heavy duty double roller timing set

                      Cylinder Heads:

                      • BluePrint Performance aluminium
                      • Hardened retainers and springs
                      • 2.02 swirl polished intake valves
                      • 1.60 swirl polished exhaust valves
                      • BP Aluminum Head Part# H8002K

                        Cam Specs:

                        • Cam Type: Flat Tappet
                        • .480 Intake .486 Exhaust
                        • 229 Intake / 230 Exhaust duration @ .050

                          Ignition Timing:

                          • 34 degrees total at 3500 RPM

                          Also Includes:

                          • New valve covers
                          • Oil pan
                          • Timing cover
                          • Aluminium intake
                          • HEI distributor
                          • 600 cfm carburetor
                          • Brass freeze plugs
                          • Dyno test results shipped with engine

                            Warranty:

                            • 30 month / 50,000 mile

                            Notes:

                            • Picture shown with optional tall, perimeter bolt valve covers.
                            • This engine requires a non weighted harmonic balancer, and late 350ci weighted flexplate/flywheel.
                            • BluePrint Engines recommends a 2000- 2400 rpm stall converter.
                            • Recommended spark plugs are Champion 792 with .045" gap
                            • Not for use in pollution controlled vehicles.

                             

                              BluePrint Engines Add-On Recommendations & Specifications for Part Number: BP35512CTC1 (GM 355c.i. Crate Engine | Dressed Longblock with Carburetor | Aluminum Heads | Flat Tappet Cam)

                               

                              Your BluePrint engine was dyno tested with the parts and specifications listed below.  If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet.

                               

                              Part Number: BP35512CTC1

                              Fuel Delivery Type: Carbureted, 600 cfm, electric choke

                              Spark Plug: Champion 792

                              Spark Plug Gap: .045"

                              Harmonic Balancer: BPP350 - Non Weighted, 8" diameter

                              Flexplate/Flywheel: Late 350 Weighted

                              Stall Converter: 2000-2400 rpm

                              Intake Manifold: Dual plane, satin aluminum

                              Fuel Recommendation: 91 Octane

                              Timing (Initial/Total Advance): Initial timing - 10-16° and Total timing 32-34°

                              Firing Order: 1,8,4,3,6,5,7,2

                              Notes: Recommended Break In Oil For Your BluePrint Crate Engine: BPP710, Not for EGR

                               

                              Click here to download a copy of the Installation Guide that came with your BluePrint engine.

                              Check Out This Product and More On Our Pinterest Page