BluePrint Engines 350CI Crate Engine | Small Block GM Style | Dressed Longblock with Carburetor | Iron Heads | Flat Tappet Cam

$3,750.00
Part #: BP3501CTC1

Description: 

  • HP & Torque: 365 HP / 405 FT LBS
    Compression Ratio: 9.1:1
    Cast Iron Heads
    Flat Tappet Cam
    Cast Steel Crank
    Hypereutectic Pistons

    Block:

    • Hand picked seasoned block
      Square and parallel decked
      Align honed main bearing bore
      Cylinders honed on computer controlled machine to within .0002 straightness and roundness
      Cylinders are sonic tested for thickness
      4-Bolt Main
      4.000" Bored .040" Over
      1-Piece Rear Main Seal
      Mech fuel pump provision: Yes
      Passenger Side Dipstick Drilled and tapped for clutch linkage

      Rotating Assembly:

      • Cast steel crankshaft
        3.480" Stroke
        OEM type 5.700" connecting rods w/ 150,000 psi bolts
        Hypereutectic pistons
        Internal Front/ External Rear

        Cylinder Heads:

        • Vortec cast iron heads; 64cc chamber
          Hardened retainers and springs
          2.02 swirl polished intake valves
          1.60 swirl polished exhaust valves

          Cam Specs:

          • Cam Type: Flat Tappet
            .480 Intake .486 Exhaust
            224 Intake / 230 Exhaust duration
            @ .050 - 110 degree lobe separation
            Using 1.5 rockers

            Ignition Timing:

            • 10-16 degrees initial, 32-34 total

            Also Includes:

            • Chrome air cleaner
              Intake Manifold; dual plane satin aluminum
              carburetor; 600cfm
              HEI Distributor
              Spark plugs and spark plug wires
              Harmonic balancer and 168 tooth flexplate
              Valve covers
              Oil pan
              Thermostat, thermostat housing
              Timing cover
              Dyno test results shipped with engine

              Warranty:

              • 30 month / 50,000 mile

              Notes:

              • Zinc Additive Required For Flat Tappet Application
                Recommended Oil For Your BluePrint Crate Engine: BPP710, BluePrint Engines break in oil
                Not for EGR
                Part #: BP3501CTC1

                Description: 

                • HP & Torque: 365 HP / 405 FT LBS
                  Compression Ratio: 9.1:1
                  Cast Iron Heads
                  Flat Tappet Cam
                  Cast Steel Crank
                  Hypereutectic Pistons

                  Block:

                  • Hand picked seasoned block
                    Square and parallel decked
                    Align honed main bearing bore
                    Cylinders honed on computer controlled machine to within .0002 straightness and roundness
                    Cylinders are sonic tested for thickness
                    4-Bolt Main
                    4.000" Bored .040" Over
                    1-Piece Rear Main Seal
                    Mech fuel pump provision: Yes
                    Passenger Side Dipstick Drilled and tapped for clutch linkage

                    Rotating Assembly:

                    • Cast steel crankshaft
                      3.480" Stroke
                      OEM type 5.700" connecting rods w/ 150,000 psi bolts
                      Hypereutectic pistons
                      Internal Front/ External Rear

                      Cylinder Heads:

                      • Vortec cast iron heads; 64cc chamber
                        Hardened retainers and springs
                        2.02 swirl polished intake valves
                        1.60 swirl polished exhaust valves

                        Cam Specs:

                        • Cam Type: Flat Tappet
                          .480 Intake .486 Exhaust
                          224 Intake / 230 Exhaust duration
                          @ .050 - 110 degree lobe separation
                          Using 1.5 rockers

                          Ignition Timing:

                          • 10-16 degrees initial, 32-34 total

                          Also Includes:

                          • Chrome air cleaner
                            Intake Manifold; dual plane satin aluminum
                            carburetor; 600cfm
                            HEI Distributor
                            Spark plugs and spark plug wires
                            Harmonic balancer and 168 tooth flexplate
                            Valve covers
                            Oil pan
                            Thermostat, thermostat housing
                            Timing cover
                            Dyno test results shipped with engine

                            Warranty:

                            • 30 month / 50,000 mile

                            Notes:

                            • Zinc Additive Required For Flat Tappet Application
                              Recommended Oil For Your BluePrint Crate Engine: BPP710, BluePrint Engines break in oil
                              Not for EGR

                              Your BluePrint engine was dyno tested with the parts and specifications listed below.  If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet.

                               

                              Part Number: BP3501CTC1

                              Fuel Delivery Type: Carbureted, 600 cfm

                              Spark Plug: AC Delco 41-993

                              Spark Plug Gap: .045"

                              Harmonic Balancer: Non Weighted - 8" diameter

                              Flexplate/Flywheel: Late 350 Weighted

                              Stall Converter: 1800-2200 rpm

                              Intake Manifold: Satin aluminum, Dual Plane, non-airgap

                              Fuel Recommendation: 87 Octane

                              Timing (Initial/Total Advance): Initial timing - 10-16° and Total timing 32-34°

                              Firing Order: 1,8,4,3,6,5,7,2

                              Notes: Recommended Break In Oil For Your BluePrint Crate Engine: BPP710, Not for EGR

                               

                              Click here to download a copy of the Installation Guide that came with your BluePrint engine.

                              Check Out This Product and More On Our Pinterest Page