BluePrint Engines 350CI Crate Engine | Small Block GM Style | Dressed Longblock Minus Carburetor | Iron Heads | Flat Tappet Cam

$2,799.00
Part #: BP3504CTC1

Description

  • HP & Torque: 325HP / 375 FT LBS
    Compression Ratio: 9.1:1
    Cast Iron Heads
    Flat Tappet Cam
    Cast Steel Crank
    Hypereutectic Pistons

Block:

  • Hand picked seasoned block
    Square and parallel decked
    Align honed main bearing bore
    Cylinders honed on computer controlled machine to within .0002 straightness and roundness
    Cylinders are sonic tested for thickness
    2-Bolt Main
    4.000" Bored .040" Over
    1-Piece Rear Main Seal
    Mech fuel pump provision: Yes
    Passenger Side Dipstick Drilled and tapped for clutch linkage

Rotating Assembly:

  • Cast steel crankshaft
    3.480" Stroke
    OEM type 5.700" connecting rods w/ 150,000 psi bolts
    Hypereutectic pistons
    Internal Front/ External Rear

Cylinder Heads:

  • Cast iron heads
    64cc chamber
    Hardened retainers and springs
    2.02 swirl polished intake valves
    1.60 swirl polished exhaust valves

Cam Specs:

  • Flat Tappet Cam
    .480 Intake/ .486 Exhaust
    224 Intake / 230 Exhaust Duration
    @ .050

Ignition Timing:

  • 34 Degrees Total at 3500 RPM

Also Includes:

  • Intake Manifold
    Cylinder Heads
    Distributor
    Oil Pan
    Valve Covers
    Timing Cover
    Water Pump
    Harmonic Balancer

Warranty:

  • 30 month / 50,000 mile

Notes:

  • Not for EGR.
    Recommended Oil: BPP710 BluePrint Crate Engine Break In Oil
    Recommended Stall Converter: 1800 to 2200 RPM
    Recommended Fuel: 87 Octane
Part #: BP3504CTC1

Description

  • HP & Torque: 325HP / 375 FT LBS
    Compression Ratio: 9.1:1
    Cast Iron Heads
    Flat Tappet Cam
    Cast Steel Crank
    Hypereutectic Pistons

Block:

  • Hand picked seasoned block
    Square and parallel decked
    Align honed main bearing bore
    Cylinders honed on computer controlled machine to within .0002 straightness and roundness
    Cylinders are sonic tested for thickness
    2-Bolt Main
    4.000" Bored .040" Over
    1-Piece Rear Main Seal
    Mech fuel pump provision: Yes
    Passenger Side Dipstick Drilled and tapped for clutch linkage

Rotating Assembly:

  • Cast steel crankshaft
    3.480" Stroke
    OEM type 5.700" connecting rods w/ 150,000 psi bolts
    Hypereutectic pistons
    Internal Front/ External Rear

Cylinder Heads:

  • Cast iron heads
    64cc chamber
    Hardened retainers and springs
    2.02 swirl polished intake valves
    1.60 swirl polished exhaust valves

Cam Specs:

  • Flat Tappet Cam
    .480 Intake/ .486 Exhaust
    224 Intake / 230 Exhaust Duration
    @ .050

Ignition Timing:

  • 34 Degrees Total at 3500 RPM

Also Includes:

  • Intake Manifold
    Cylinder Heads
    Distributor
    Oil Pan
    Valve Covers
    Timing Cover
    Water Pump
    Harmonic Balancer

Warranty:

  • 30 month / 50,000 mile

Notes:

  • Not for EGR.
    Recommended Oil: BPP710 BluePrint Crate Engine Break In Oil
    Recommended Stall Converter: 1800 to 2200 RPM
    Recommended Fuel: 87 Octane

Your BluePrint engine was dyno tested with the parts and specifications listed below.  If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet.

 

Part Number: BP3504CTC1

Fuel Delivery Type: N/A

Spark Plug: AC Delco 41-993

Spark Plug Gap: .045"

Harmonic Balancer: BPP350 - Internally balanced

Flexplate/Flywheel: Late 350, weighted

Stall Converter: 1800-2200

Intake Manifold: Dual plane, satin aluminum

Fuel Recommendation: 87 Octane

Timing (Initial/Total Advance): Initial timing - 14° and Total timing 34°

Firing Order: 1,8,4,3,6,5,7,2

Notes: Recommended Break In Oil For Your BluePrint Crate Engine: BPP710, Not for EGR

 

Click here to download a copy of the Installation Guide that came with your BluePrint engine.

Check Out This Product and More On Our Pinterest Page