BluePrint Engines 347CI Stroker Crate Engine | Small Block Ford Style | Dressed Longblock with Carburetor | Aluminum Heads | Roller Cam

$5,024.00
Part #: BP3474CTC

 

Description: 

  • HP & Torque: 415 HP / 415 FT LBS
    Compression Ratio: 10.0:1
    Aluminum Heads
    Hypereutectic Pistons
    Roller Cam
    Cast Steel Crank

Block:

  • Hand picked seasoned blocks bored .040 over
    Square and parallel decked
    Align honed main bearing bore
    Cylinders honed on computer controlled machine to within .0002 straightness and roundness
    Cylinders are sonic tested for thickness

Rotating Assembly:

  • New cast steel crankshaft
    Forged I beam rods
    Hypereutectic pistons
    Hastings Moly rings
    Balanced rotating assembly
    High volume oil pump
    Hydraulic roller camshaft
    Heavy duty double roller timing set

Cylinder Heads:

  • BluePrint Performance Aluminum
    Hardened retainers and springs
    2.02 swirl polished intake valves
    1.60 swirl polished exhaust valves
    BP Aluminum Head Part# HP9008

Cam Specs:

  • Cam Type: Roller
    .543 Intake .554 Exhaust
    218 Intake / 226 Exhaust duration @ .050 - 112 degree lobe separationn

Ignition Timing:

  • 34 degrees at 3500 RPM

Also Includes:

  • Dual plane, satin aluminum intake manifold 
    600cfm carburetor
    Distributor
    Valve covers
    Painted oil pan
    Brass freeze plugs
    Dyno test results shipped with engine

Warranty:

  • 30 month / 50,000 mile

Notes:

  • Not for use in pollution controlled vehicles.
Part #: BP3474CTC

 

Description: 

  • HP & Torque: 415 HP / 415 FT LBS
    Compression Ratio: 10.0:1
    Aluminum Heads
    Hypereutectic Pistons
    Roller Cam
    Cast Steel Crank

Block:

  • Hand picked seasoned blocks bored .040 over
    Square and parallel decked
    Align honed main bearing bore
    Cylinders honed on computer controlled machine to within .0002 straightness and roundness
    Cylinders are sonic tested for thickness

Rotating Assembly:

  • New cast steel crankshaft
    Forged I beam rods
    Hypereutectic pistons
    Hastings Moly rings
    Balanced rotating assembly
    High volume oil pump
    Hydraulic roller camshaft
    Heavy duty double roller timing set

Cylinder Heads:

  • BluePrint Performance Aluminum
    Hardened retainers and springs
    2.02 swirl polished intake valves
    1.60 swirl polished exhaust valves
    BP Aluminum Head Part# HP9008

Cam Specs:

  • Cam Type: Roller
    .543 Intake .554 Exhaust
    218 Intake / 226 Exhaust duration @ .050 - 112 degree lobe separationn

Ignition Timing:

  • 34 degrees at 3500 RPM

Also Includes:

  • Dual plane, satin aluminum intake manifold 
    600cfm carburetor
    Distributor
    Valve covers
    Painted oil pan
    Brass freeze plugs
    Dyno test results shipped with engine

Warranty:

  • 30 month / 50,000 mile

Notes:

  • Not for use in pollution controlled vehicles.

BluePrint Engines Add-On Recommendations & Specifications for Part Number: BP3474CTC (Ford 347c.i. Stroker Crate Engine | Dressed Longblock with Carb | Aluminum Heads | Roller Cam)

 

Your BluePrint engine was dyno tested with the parts and specifications listed below.  If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet.

 

Part Number: BP3474CTC

Fuel Delivery Type: Carbureted, 600cfm, Electric choke

Spark Plug: Champion 792

Spark Plug Gap: .045"

Harmonic Balancer: BPP28 - 28.4 Ounce, 6.4" Diameter

Flexplate/Flywheel: 28.4 Ounce Weighted

Stall Converter: 2000-2400 rpm

Intake Manifold: Dual plane, satin aluminum

Fuel Recommendation: 91 Octane

Timing (Initial/Total Advance): Initial timing - 10-16° and Total timing 32-34°

Firing Order: 1,3,7,2,6,5,4,8

Notes: Recommended Break In Oil For Your BluePrint Crate Engine: BPP710, Not for EGR

 

Click here to download a copy of the Installation Guide that came with your BluePrint engine.

Check Out This Product and More On Our Pinterest Page