BluePrint Engines 306CI Crate Engine | Small Block Ford Style | Longblock | Aluminum Heads | Roller Cam

$3,850.00
This engine will be dyno tested before it ships to you at no additional charge (others charge $500)!
Part #: BP3060CT

Description:

Dyno Tested Warranty
  • HP & Torque: 370 HP / 350 FT LBS
    Compression Ratio: 9.5:1
    Aluminum Heads
    Hydraulic Roller Cam
    Cast Steel Crank
    Hypereutectic Pistons

Block:

  • Hand picked seasoned block
    Square and parallel decked
    Align honed main bearing bore
    Cylinders honed on computer controlled machine to within .0002 straightness and roundness
    Cylinders are sonic tested for thickness
    2-Bolt Main
    4.000" Bored .040" Over
    1-Piece Rear Main Seal
    Mech fuel pump provision: Yes

Rotating Assembly:

  • Ford, machined and balanced by BluePrint Engines
    3.000" Stroke
    Upgraded 5.090" connecting rods w/ 150,000 psi bolts
    Hypereutectic pistons
    50oz External balance

Cylinder Heads:

  • BluePrint Aluminum Cylinder Heads -HP9009
    60cc chamber
    2.02" intake/1.60" exhaust valves
    190cc intake/60cc exhaust runners

Cam Specs:

  • Cam Type: Roller
    .543 Intake .554 Exhaust
    218 Intake / 226 Exhaust duration
    @ .050 - 112 degree lobe separation

Ignition Timing:

  • 34 Degrees Total at 3500 RPM

Also Includes:

  • Valve covers
    Painted oil pan
    Brass freeze plugs
    Dyno test results shipped with engine

      Warranty:

      • 30 month / 50,000 mile

      Notes:

      • Not for use in pollution controlled vehicles.
        *A bronze distributor gear is NOT recommended on this engine
        Engine requires a standard v-belt rotation water pump and belt system.
        This engine is not compatible with factory fuel injection.

      • Engine timing cover is designed for standard rotation water pump ONLY

      Yellow Exclamation Triangle WARNING: Cancer and Reproductive Harm-
      www.P65Warnings.ca.gov

      This engine will be dyno tested before it ships to you at no additional charge (others charge $500)!
      Part #: BP3060CT

      Description:

      Dyno Tested Warranty
      • HP & Torque: 370 HP / 350 FT LBS
        Compression Ratio: 9.5:1
        Aluminum Heads
        Hydraulic Roller Cam
        Cast Steel Crank
        Hypereutectic Pistons

      Block:

      • Hand picked seasoned block
        Square and parallel decked
        Align honed main bearing bore
        Cylinders honed on computer controlled machine to within .0002 straightness and roundness
        Cylinders are sonic tested for thickness
        2-Bolt Main
        4.000" Bored .040" Over
        1-Piece Rear Main Seal
        Mech fuel pump provision: Yes

      Rotating Assembly:

      • Ford, machined and balanced by BluePrint Engines
        3.000" Stroke
        Upgraded 5.090" connecting rods w/ 150,000 psi bolts
        Hypereutectic pistons
        50oz External balance

      Cylinder Heads:

      • BluePrint Aluminum Cylinder Heads -HP9009
        60cc chamber
        2.02" intake/1.60" exhaust valves
        190cc intake/60cc exhaust runners

      Cam Specs:

      • Cam Type: Roller
        .543 Intake .554 Exhaust
        218 Intake / 226 Exhaust duration
        @ .050 - 112 degree lobe separation

      Ignition Timing:

      • 34 Degrees Total at 3500 RPM

      Also Includes:

      • Valve covers
        Painted oil pan
        Brass freeze plugs
        Dyno test results shipped with engine

          Warranty:

          • 30 month / 50,000 mile

          Notes:

          • Not for use in pollution controlled vehicles.
            *A bronze distributor gear is NOT recommended on this engine
            Engine requires a standard v-belt rotation water pump and belt system.
            This engine is not compatible with factory fuel injection.

          • Engine timing cover is designed for standard rotation water pump ONLY

          Yellow Exclamation Triangle WARNING: Cancer and Reproductive Harm-
          www.P65Warnings.ca.gov

          Customer Reviews

          Based on 1 review Write a review

          Your BluePrint engine was dyno tested with the parts and specifications listed below.  If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet.

           

          Part Number: BP3060CT

          Fuel Delivery Type: Carbureted, 600cfm **Not included**

          Spark Plug: Champion 792

          Spark Plug Gap: .045"

          Harmonic Balancer: BPP50 - 50 Ounce, 6.4" Diameter

          Flexplate/Flywheel: 50 Ounce Weighted

          Stall Converter: 1800-2200 rpm

          Intake Manifold: Dual plane, satin aluminum

          Fuel Recommendation: 91 Octane

          Timing (Initial/Total Advance): Initial timing - 10-16° and Total timing 32-34°

          Firing Order: 1,3,7,2,6,5,4,8

          Notes: Not for EGR *Painted Ford Blue* Engine requires a V-belt standard rotation water pump and belt system. Recommended break in oil for your BluePrint Crate Engine: BPP710

           

          Click here to download a copy of the Installation Guide that came with your BluePrint engine.

          Check Out This Product and More On Our Pinterest Page