BluePrint Engines Builder Series 400CI Stroker Crate Engine and TKO Manual Trans Package | Small Block GM Style | Dressed Longblock with Fuel Injection | Aluminum Heads | Roller Cam

$16,165.00

This engine will be dyno tested before it ships to you at no additional charge (others charge $500)!
Part #: B400FKTKO

Description

Dyno Tested Warranty
  • HP & Torque: 508 HP / 473 FT LBS
    Compression Ratio: 10.3:1
    Aluminum Heads
    Hydraulic Roller Cam
    Forged Crank
    Forged Pistons

Block:

  • NEW BluePrint Cast Iron Block
    Manufactured and Machined in the USA!
    4-Bolt Main
    4.125" Bore
    1-Piece Rear Main Seal
    Mech fuel pump provision: Yes
    Passenger Side Dipstick
  • Drilled and tapped for clutch linkage

Rotating Assembly:

  • New BluePrint Forged Crankshaft
    3.750" Stroke
    OEM type 5.700" connecting rods w/ 150,000 psi bolts
    Forged Pistons
    Internal Front/ External Rear

Cylinder Heads:

  • BluePrint Aluminum Cylinder Heads - HP8103
    64cc chamber
    2.08" intake/1.60" exhaust valves
    220cc intake/67cc exhaust runners

Cam Specs:

  • Cam Type: Roller
    .555 Intake .576 Exhaust
    236 Intake / 242 Exhaust duration
    @ .050 - 110 ° lobe separation

    Ignition Timing:

    • 10-16° inital and total timing 32-34° at 3500 RPM

    Also Includes:

    • Intake Manifold dual plane, satin aluminum
      Complete EFI system
      Valve covers, oil pan and timing cover
      Brass freeze plugs
      Dyno test results shipped with engine
    • EFI Fuel Pump kit
    • Spark plugs & wires
    • 180 degree thermoset & housing
      Oil filter
      Plug wire seperators
    • complete front accessory drive with A/C and P/S

    ASSEMBLED W/ COMPLETE TKO TRANS PACKAGE:

    Mcleod Super Street Pro single disk clutch
    Hydraulic throw out bearing
    Bell housing
    Billet flywheel
    Starter

    First Gear Ratio: 2.87:1
    Second Gear Ratio: 1.89:1
    Third Gear Ratio: 1.28:1
    Fourth Gear Ratio: 1.00:1
    Fifth Gear Ratio: 0.82:1

    Warranty:

    • 30 month / 50,000 mile

    Notes:

    • NEW BluePrint block manufactured and machined in the USA!
    • Package Ships assembled as pictured. 
    • IF THIS IS BEING ORDERED FOR A FACTORY FIVE VEHICLE,
      STOP AND CALL US AT 1-800-483-4263 FOR PROPER FITMENT
      OR VISIT FACTORYFIVEENGINES.COM

    Yellow Exclamation Triangle WARNING: Cancer and Reproductive Harm-
    www.P65Warnings.ca.gov

    This engine will be dyno tested before it ships to you at no additional charge (others charge $500)!
    Part #: B400FKTKO

    Description

    Dyno Tested Warranty
    • HP & Torque: 508 HP / 473 FT LBS
      Compression Ratio: 10.3:1
      Aluminum Heads
      Hydraulic Roller Cam
      Forged Crank
      Forged Pistons

    Block:

    • NEW BluePrint Cast Iron Block
      Manufactured and Machined in the USA!
      4-Bolt Main
      4.125" Bore
      1-Piece Rear Main Seal
      Mech fuel pump provision: Yes
      Passenger Side Dipstick
    • Drilled and tapped for clutch linkage

    Rotating Assembly:

    • New BluePrint Forged Crankshaft
      3.750" Stroke
      OEM type 5.700" connecting rods w/ 150,000 psi bolts
      Forged Pistons
      Internal Front/ External Rear

    Cylinder Heads:

    • BluePrint Aluminum Cylinder Heads - HP8103
      64cc chamber
      2.08" intake/1.60" exhaust valves
      220cc intake/67cc exhaust runners

    Cam Specs:

    • Cam Type: Roller
      .555 Intake .576 Exhaust
      236 Intake / 242 Exhaust duration
      @ .050 - 110 ° lobe separation

      Ignition Timing:

      • 10-16° inital and total timing 32-34° at 3500 RPM

      Also Includes:

      • Intake Manifold dual plane, satin aluminum
        Complete EFI system
        Valve covers, oil pan and timing cover
        Brass freeze plugs
        Dyno test results shipped with engine
      • EFI Fuel Pump kit
      • Spark plugs & wires
      • 180 degree thermoset & housing
        Oil filter
        Plug wire seperators
      • complete front accessory drive with A/C and P/S

      ASSEMBLED W/ COMPLETE TKO TRANS PACKAGE:

      Mcleod Super Street Pro single disk clutch
      Hydraulic throw out bearing
      Bell housing
      Billet flywheel
      Starter

      First Gear Ratio: 2.87:1
      Second Gear Ratio: 1.89:1
      Third Gear Ratio: 1.28:1
      Fourth Gear Ratio: 1.00:1
      Fifth Gear Ratio: 0.82:1

      Warranty:

      • 30 month / 50,000 mile

      Notes:

      • NEW BluePrint block manufactured and machined in the USA!
      • Package Ships assembled as pictured. 
      • IF THIS IS BEING ORDERED FOR A FACTORY FIVE VEHICLE,
        STOP AND CALL US AT 1-800-483-4263 FOR PROPER FITMENT
        OR VISIT FACTORYFIVEENGINES.COM

      Yellow Exclamation Triangle WARNING: Cancer and Reproductive Harm-
      www.P65Warnings.ca.gov

      Your BluePrint engine was dyno tested with the parts and specifications listed below.  If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet.

       

      Part Number: B400FKTKO

      Fuel Delivery Type: EFI

      Spark Plug: BPP7938 NGK 7938 BKR5E

      Spark Plug Gap: .035"

      Harmonic Balancer: BPP350 - Non Weighted, 8" diameter

      Flexplate/Flywheel: Weighted, 1 pc RMS

      Stall Converter: 2400+

      Intake Manifold: Dual plane, satin aluminum

      Fuel Recommendation: 91 Octane

      Timing (Initial/Total Advance): Initial timing - 10-16° and Total timing 32-34°

      Firing Order: 1,8,4,3,6,5,7,2

      Notes: Recommended break in oil for your BluePrint Crate Engine:BPP710, Not for EGR

       

      Click here to download a copy of the Installation Guide that came with your BluePrint engine.

      Check Out This Product and More On Our Pinterest Page