Chrysler 408ci Stroker Crate Engine | Dressed Longblock with Carburetor | Iron Heads | Flat Tappet Cam

$4,955.00
Part #: BPC4082CTC

Description

  • HP & Torque: 375 HP / 460 FT LBS
    Compression Ratio: 9.8:1
    Cast Iron Heads
    Flat Tappet Cam
    Cast Steel Crank

Block:

  • Seasoned 360 block
    Square and parallel decked
    Align honed main bearing bore
    Cylinders honed on computer controlled machine to within .0002 straightness and roundness
    Cylinders are sonic tested for thickness

Rotating Assembly:

  • New cast steel crankshaft
    Hypereutectic pistons
    I-beam rods
    Hastings Moly rings
    Balanced rotating assembly
    High volume oil pump
    Flat tappet hydraulic lifter camshaft
    Heavy duty double roller timing set

Cylinder Heads:

  • Magnum cast iron heads
    Hardened retainers and springs
    1.92" swirl polished intake valves
    1.625" swirl polished exhaust valves
    Hardened push rods

Cam Specs:

  • Cam Type: Flat Tappet
    .474 Intake .474 Exhaust
    238 Intake / 238 Exhaust duration 
    @ .050 - 110 degree lobe separation

Ignition Timing:

  • 34 degrees at 3500 RPM

Also Includes:

  • Valve covers, oil pan and timing cover
    Brass freeze plugs
    Dyno tested – and shipped with results

Warranty:

  • 30 month / 50,000 mile

Notes:

  • Not for use in pollution controlled vehicles.
Part #: BPC4082CTC

Description

  • HP & Torque: 375 HP / 460 FT LBS
    Compression Ratio: 9.8:1
    Cast Iron Heads
    Flat Tappet Cam
    Cast Steel Crank

Block:

  • Seasoned 360 block
    Square and parallel decked
    Align honed main bearing bore
    Cylinders honed on computer controlled machine to within .0002 straightness and roundness
    Cylinders are sonic tested for thickness

Rotating Assembly:

  • New cast steel crankshaft
    Hypereutectic pistons
    I-beam rods
    Hastings Moly rings
    Balanced rotating assembly
    High volume oil pump
    Flat tappet hydraulic lifter camshaft
    Heavy duty double roller timing set

Cylinder Heads:

  • Magnum cast iron heads
    Hardened retainers and springs
    1.92" swirl polished intake valves
    1.625" swirl polished exhaust valves
    Hardened push rods

Cam Specs:

  • Cam Type: Flat Tappet
    .474 Intake .474 Exhaust
    238 Intake / 238 Exhaust duration 
    @ .050 - 110 degree lobe separation

Ignition Timing:

  • 34 degrees at 3500 RPM

Also Includes:

  • Valve covers, oil pan and timing cover
    Brass freeze plugs
    Dyno tested – and shipped with results

Warranty:

  • 30 month / 50,000 mile

Notes:

  • Not for use in pollution controlled vehicles.

BluePrint Engines Add-On Recommendations & Specifications for Part Number: BPC4082CTC (Chrysler 408ci Stroker Crate Engine | Dressed Longblock with Carburetor | Iron Heads | Flat Tappet Cam)

 

Your BluePrint engine was dyno tested with the parts and specifications listed below.  If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet.

 

Part Number: BPC4082CTC

Fuel Delivery Type: Carbureted, 750cfm, manual choke

Spark Plug: Champion 792

Spark Plug Gap: .045"

Harmonic Balancer: 360 EXTERNALLY BALANCED '93-'97, 7.25" Diameter

Flexplate/Flywheel: Pre-Magnum, Weighed 360

Stall Converter: 1800-2200 rpm

Intake Manifold: Dual plane, satin aluminum

Fuel Recommendation: 91 Octane

Timing (Initial/Total Advance): Initial timing - 10-16° and Total timing 32-34°

Firing Order: 1,8,4,3,6,5,7,2

Notes: Recommended break in oil for your BluePrint Crate Engine:BPP710, Not for EGR

 

Click here to download a copy of the Installation Guide that came with your BluePrint engine.

Check Out This Product and More On Our Pinterest Page