BluePrint Engines Builder Series 427 CI SBC ProSeries Stroker Crate Engine and TKO Manual Trans Package | Small Block GM Style | Dressed Longblock with Carburetor

$15,769.00

This engine will be dyno tested before it ships to you at no additional charge (others charge $500)!

Pictured with custom Paint. Available for for additional Charge

Part Number: B427KTKO

Description:

Dyno Tested Warranty

HP & Torque: 540 HP / 535 FT LBS
Compression Ratio: 10.0:1
Aluminum Heads
Hydraulic Roller Cam
Forged Crank
Forged Pistons


Block:

  • NEW BluePrint Cast Iron Block
    Manufactured and Machined in the USA!
    4-Bolt Main
    4.125" Bore
    2-Piece Rear Main Seal
    Mech fuel pump provision: Yes
    Passenger Side Dipstick
  • Drilled and tapped for clutch linkage

    Rotating Assembly:

    • New BluePrint Forged Crankshaft
      4.000" Stroke
      Forged 6.000" connecting rods
      Forged Pistons
      Internal Front/ Internal Rear

    Cylinder Heads:

    • BluePrint Aluminum Cylinder Heads - HP8103
      64cc chamber
      2.08" intake/1.60" exhaust valves
      220cc intake/67cc exhaust runners

    Cam Specs:

    • Cam Type: Roller
      .577 Intake .577 Exhaust
      240 Intake / 248 Exhaust duration
      @ .050 - 112 degree lobe separation

    Ignition Timing:

    Initial timing - 10-16° and Total timing 32-34°

    Also Includes:

    • Intake Manifold dual plane, satin aluminum 
      850 CFM Carburetor
      Valve covers, oil pan and timing cover
      Brass freeze plugs
      Dyno test results shipped with engine
    • Spark plugs & wires
    • 180 degree thermoset & housing
      Installed complete front accessory drive with A/C and P/S

    ASSEMBLED W/ COMPLETE TKO TRANS PACKAGE:

    Mcleod Super Street Pro single disk clutch
    Hydraulic throw out bearing
    Bell housing
    Billet flywheel
    Starter

    First Gear Ratio: 2.87:1
    Second Gear Ratio: 1.89:1
    Third Gear Ratio: 1.28:1
    Fourth Gear Ratio: 1.00:1
    Fifth Gear Ratio: 0.82:1

      Warranty:

      30 month / 50,000 mile


        Notes:

        • Not for use in pollution controlled vehicles.
        • Yellow Exclamation Triangle WARNING: Cancer and Reproductive Harm- 

        This engine will be dyno tested before it ships to you at no additional charge (others charge $500)!

        Pictured with custom Paint. Available for for additional Charge

        Part Number: B427KTKO

        Description:

        Dyno Tested Warranty

        HP & Torque: 540 HP / 535 FT LBS
        Compression Ratio: 10.0:1
        Aluminum Heads
        Hydraulic Roller Cam
        Forged Crank
        Forged Pistons


        Block:

        • NEW BluePrint Cast Iron Block
          Manufactured and Machined in the USA!
          4-Bolt Main
          4.125" Bore
          2-Piece Rear Main Seal
          Mech fuel pump provision: Yes
          Passenger Side Dipstick
        • Drilled and tapped for clutch linkage

          Rotating Assembly:

          • New BluePrint Forged Crankshaft
            4.000" Stroke
            Forged 6.000" connecting rods
            Forged Pistons
            Internal Front/ Internal Rear

          Cylinder Heads:

          • BluePrint Aluminum Cylinder Heads - HP8103
            64cc chamber
            2.08" intake/1.60" exhaust valves
            220cc intake/67cc exhaust runners

          Cam Specs:

          • Cam Type: Roller
            .577 Intake .577 Exhaust
            240 Intake / 248 Exhaust duration
            @ .050 - 112 degree lobe separation

          Ignition Timing:

          Initial timing - 10-16° and Total timing 32-34°

          Also Includes:

          • Intake Manifold dual plane, satin aluminum 
            850 CFM Carburetor
            Valve covers, oil pan and timing cover
            Brass freeze plugs
            Dyno test results shipped with engine
          • Spark plugs & wires
          • 180 degree thermoset & housing
            Installed complete front accessory drive with A/C and P/S

          ASSEMBLED W/ COMPLETE TKO TRANS PACKAGE:

          Mcleod Super Street Pro single disk clutch
          Hydraulic throw out bearing
          Bell housing
          Billet flywheel
          Starter

          First Gear Ratio: 2.87:1
          Second Gear Ratio: 1.89:1
          Third Gear Ratio: 1.28:1
          Fourth Gear Ratio: 1.00:1
          Fifth Gear Ratio: 0.82:1

            Warranty:

            30 month / 50,000 mile


              Notes:

              • Not for use in pollution controlled vehicles.
              • Yellow Exclamation Triangle WARNING: Cancer and Reproductive Harm- 

              Customer Reviews

              Based on 2 reviews Write a review

              Your BluePrint engine was dyno tested with the parts and specifications listed below.  If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet.

               

              Part Number: B427KTKO

              Fuel Delivery Type: 850 CFM Carburetor

              Spark Plug: BPP7938 NGK 7938 BKR5E

              Spark Plug Gap: .035"

              Harmonic Balancer: Non-Weighted

              Flexplate/Flywheel: Non-weighted

              Stall Converter: 2200+

              Intake Manifold: N/A

              Fuel Recommendation: 91 Octane

              Timing (Initial/Total Advance): Initial timing - 10-16° and Total timing 32-34°

              Firing Order: 1,8,4,3,6,5,7,2

              Notes: New BluePrint block manufactured and machined in the USA. Recommended break in oil for your BluePrint Crate Engine: BPP710, Not for EGR

               

              Click here to download a copy of the Installation Guide that came with your BluePrint engine.

              Add Ons

              Add Ons

              Check Out This Product and More On Our Pinterest Page