BluePrint Engines Builder Series 383CI Stroker Crate Engine and TKO Manual Trans Package | Small Block GM Style | Dressed Longblock with Fuel Injection | Aluminum Heads | Roller Cam

$15,265.00

This engine will be dyno tested before it ships to you at no additional charge (others charge $500)!
Part #: B383FKTKO

Description

Dyno Tested Warranty
    • HP & Torque: 430 HP / 450 FT LBS
      Compression Ratio: 10.0:1
      Aluminum Heads
      Hydraulic Roller Cam
      Cast Steel Crank
      Hypereutectic Pistons

    BLOCK:

    • Hand picked seasoned block
      Square and parallel decked
      Align honed main bearing bore
      Cylinders honed on computer controlled machine to within .0002 straightness and roundness
      Cylinders are sonic tested for thickness
      4-Bolt Main
      4.000" Bored .040" Over
      1-Piece Rear Main Seal
      Mech fuel pump provision: Yes
      Passenger Side Dipstick
    • Drilled and tapped for clutch linkage

    ROTATING ASSEMBLY:

    • New BluePrint Cast steel crankshaft
      3.750" Stroke
      OEM type 5.700" connecting rods w/ 150,000 psi bolts
      Hypereutectic pistons
      External Front/ External Rear

    CYLINDER HEADS:

    • BluePrint Aluminum Cylinder Heads - H8002K
      64cc chamber
      2.02" intake/1.60" exhaust valves
      195cc intake/75cc exhaust runners

    CAM SPECS:

    • Cam Type: Roller
      .528 Intake .536 Exhaust
      221 Intake / 226 Exhaust duration
      @.050 - 110 degree lobe separation

    Also Includes:

    • Intake Manifold dual plane, satin aluminum
      Complete EFI system
      Valve covers, oil pan and timing cover
      Brass freeze plugs
      Dyno test results shipped with engine
    • EFI Fuel Pump kit
    • Spark plugs & wires
    • 180 degree thermoset & housing
      Oil filter
      Plug wire seperators
    • complete front accessory drive with A/C and P/S

    ASSEMBLED W/ COMPLETE TKO TRANS PACKAGE:

    Mcleod Super Street Pro single disk clutch
    Hydraulic throw out bearing
    Bell housing
    Billet flywheel
    Starter

    First Gear Ratio: 2.87:1
    Second Gear Ratio: 1.89:1
    Third Gear Ratio: 1.28:1
    Fourth Gear Ratio: 1.00:1
    Fifth Gear Ratio: 0.82:1

    Warranty:

    • 30 month / 50,000 mile

    Notes:

    • Package Ships assembled as pictured. 
    • IF THIS IS BEING ORDERED FOR A FACTORY FIVE VEHICLE,
      STOP AND CALL US AT 1-800-483-4263 FOR PROPER FITMENT
      OR VISIT FACTORYFIVEENGINES.COM

    Yellow Exclamation Triangle WARNING: Cancer and Reproductive Harm-
    www.P65Warnings.ca.gov

    This engine will be dyno tested before it ships to you at no additional charge (others charge $500)!
    Part #: B383FKTKO

    Description

    Dyno Tested Warranty
      • HP & Torque: 430 HP / 450 FT LBS
        Compression Ratio: 10.0:1
        Aluminum Heads
        Hydraulic Roller Cam
        Cast Steel Crank
        Hypereutectic Pistons

      BLOCK:

      • Hand picked seasoned block
        Square and parallel decked
        Align honed main bearing bore
        Cylinders honed on computer controlled machine to within .0002 straightness and roundness
        Cylinders are sonic tested for thickness
        4-Bolt Main
        4.000" Bored .040" Over
        1-Piece Rear Main Seal
        Mech fuel pump provision: Yes
        Passenger Side Dipstick
      • Drilled and tapped for clutch linkage

      ROTATING ASSEMBLY:

      • New BluePrint Cast steel crankshaft
        3.750" Stroke
        OEM type 5.700" connecting rods w/ 150,000 psi bolts
        Hypereutectic pistons
        External Front/ External Rear

      CYLINDER HEADS:

      • BluePrint Aluminum Cylinder Heads - H8002K
        64cc chamber
        2.02" intake/1.60" exhaust valves
        195cc intake/75cc exhaust runners

      CAM SPECS:

      • Cam Type: Roller
        .528 Intake .536 Exhaust
        221 Intake / 226 Exhaust duration
        @.050 - 110 degree lobe separation

      Also Includes:

      • Intake Manifold dual plane, satin aluminum
        Complete EFI system
        Valve covers, oil pan and timing cover
        Brass freeze plugs
        Dyno test results shipped with engine
      • EFI Fuel Pump kit
      • Spark plugs & wires
      • 180 degree thermoset & housing
        Oil filter
        Plug wire seperators
      • complete front accessory drive with A/C and P/S

      ASSEMBLED W/ COMPLETE TKO TRANS PACKAGE:

      Mcleod Super Street Pro single disk clutch
      Hydraulic throw out bearing
      Bell housing
      Billet flywheel
      Starter

      First Gear Ratio: 2.87:1
      Second Gear Ratio: 1.89:1
      Third Gear Ratio: 1.28:1
      Fourth Gear Ratio: 1.00:1
      Fifth Gear Ratio: 0.82:1

      Warranty:

      • 30 month / 50,000 mile

      Notes:

      • Package Ships assembled as pictured. 
      • IF THIS IS BEING ORDERED FOR A FACTORY FIVE VEHICLE,
        STOP AND CALL US AT 1-800-483-4263 FOR PROPER FITMENT
        OR VISIT FACTORYFIVEENGINES.COM

      Yellow Exclamation Triangle WARNING: Cancer and Reproductive Harm-
      www.P65Warnings.ca.gov

      Your BluePrint engine was dyno tested with the parts and specifications listed below.  If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet.

       

      Part Number: B383FKTKO

      Fuel Delivery Type: EFI

      Spark Plug: BPP7938 NGK 7938 BKR5E

      Spark Plug Gap: .035"

      Harmonic Balancer: BPP350 - Non Weighted, 8" diameter

      Flexplate/Flywheel: Weighted, 1 pc RMS

      Stall Converter: 2400+

      Intake Manifold: Dual plane, satin aluminum

      Fuel Recommendation: 91 Octane

      Timing (Initial/Total Advance): Initial timing - 10-16° and Total timing 32-34°

      Firing Order: 1,8,4,3,6,5,7,2

      Notes: Recommended break in oil for your BluePrint Crate Engine:BPP710, Not for EGR

       

      Click here to download a copy of the Installation Guide that came with your BluePrint engine.

      Add Ons

      Add Ons

      Check Out This Product and More On Our Pinterest Page