BluePrint Engines Builder Series 347CI Stroker Engine and TKO Manual Trans Package | Small Block Ford Style | Dressed Longblock with Fuel Injection | Aluminum Heads | Roller Cam | Polished Front Accessory Drive

$16,300.00

This engine will be dyno tested before it ships to you at no additional charge (others charge $500)!
Part #: B347FKTKO

 

Description: 

Dyno Tested Warranty
  • HP & Torque: 410 HP / 415 FT LBS
    Compression Ratio: 10.0:1
    Aluminum Heads
    Hydraulic Roller Cam
    Steel Crank
    Forged Pistons

Block:

  • Hand picked seasoned block
    Square and parallel decked
    Align honed main bearing bore
    Cylinders honed on computer controlled machine to within .0002 straightness and roundness
    Cylinders are sonic tested for thickness
    2-Bolt Main
    4.000" Bored .040" Over
    1-Piece Rear Main Seal
    Mech fuel pump provision: Yes

Rotating Assembly:

  • New BluePrint Cast steel crankshaft
    3.400" Stroke
    Forged I-beam 5.400" connecting rods
    Forged pistons
    28oz External balance

Cylinder Heads:

  • BluePrint Aluminum Cylinder Heads -HP9009
    60cc chamber
    2.02" intake/1.60" exhaust valves
    190cc intake/65cc exhaust runners

Cam Specs:

  • Cam Type: Roller
    .543 Intake
    .554 Exhaust & 218 Intake
    226 Exhaust duration @ .050 - 112 degree lobe separation

Ignition Timing:

  • 34 Degrees Total at 3500 RPM

Also Includes:

  • Dual plane, satin aluminum intake manifold
    EFI system
    Pro Billet Distributor
    Mustang Style Valve covers
    7 Quart oil pan
    Brass freeze plugs
    Dyno tested and shipped with results

ASSEMBLED W/ COMPLETE TKO TRANS PACKAGE:

Mcleod Super Street Pro single disk clutch
Hydraulic throw out bearing
Quicktime steel bell housing
Billet flywheel
Engine guard
Starter

First Gear Ratio: 2.87:1
Second Gear Ratio: 1.89:1
Third Gear Ratio: 1.28:1
Fourth Gear Ratio: 1.00:1
Fifth Gear Ratio: 0.82:1

Warranty:

  • 30 month / 50,000 mile

Notes:

Package Ships assembled as pictured. 

  • IF THIS IS BEING ORDERED FOR A FACTORY FIVE VEHICLE,
    STOP AND CALL US AT 1-800-483-4263 FOR PROPER FITMENT
    OR VISIT FACTORYFIVEENGINES.COM

Yellow Exclamation Triangle WARNING: Cancer and Reproductive Harm-
www.P65Warnings.ca.gov

This engine will be dyno tested before it ships to you at no additional charge (others charge $500)!
Part #: B347FKTKO

 

Description: 

Dyno Tested Warranty
  • HP & Torque: 410 HP / 415 FT LBS
    Compression Ratio: 10.0:1
    Aluminum Heads
    Hydraulic Roller Cam
    Steel Crank
    Forged Pistons

Block:

  • Hand picked seasoned block
    Square and parallel decked
    Align honed main bearing bore
    Cylinders honed on computer controlled machine to within .0002 straightness and roundness
    Cylinders are sonic tested for thickness
    2-Bolt Main
    4.000" Bored .040" Over
    1-Piece Rear Main Seal
    Mech fuel pump provision: Yes

Rotating Assembly:

  • New BluePrint Cast steel crankshaft
    3.400" Stroke
    Forged I-beam 5.400" connecting rods
    Forged pistons
    28oz External balance

Cylinder Heads:

  • BluePrint Aluminum Cylinder Heads -HP9009
    60cc chamber
    2.02" intake/1.60" exhaust valves
    190cc intake/65cc exhaust runners

Cam Specs:

  • Cam Type: Roller
    .543 Intake
    .554 Exhaust & 218 Intake
    226 Exhaust duration @ .050 - 112 degree lobe separation

Ignition Timing:

  • 34 Degrees Total at 3500 RPM

Also Includes:

  • Dual plane, satin aluminum intake manifold
    EFI system
    Pro Billet Distributor
    Mustang Style Valve covers
    7 Quart oil pan
    Brass freeze plugs
    Dyno tested and shipped with results

ASSEMBLED W/ COMPLETE TKO TRANS PACKAGE:

Mcleod Super Street Pro single disk clutch
Hydraulic throw out bearing
Quicktime steel bell housing
Billet flywheel
Engine guard
Starter

First Gear Ratio: 2.87:1
Second Gear Ratio: 1.89:1
Third Gear Ratio: 1.28:1
Fourth Gear Ratio: 1.00:1
Fifth Gear Ratio: 0.82:1

Warranty:

  • 30 month / 50,000 mile

Notes:

Package Ships assembled as pictured. 

  • IF THIS IS BEING ORDERED FOR A FACTORY FIVE VEHICLE,
    STOP AND CALL US AT 1-800-483-4263 FOR PROPER FITMENT
    OR VISIT FACTORYFIVEENGINES.COM

Yellow Exclamation Triangle WARNING: Cancer and Reproductive Harm-
www.P65Warnings.ca.gov

Your BluePrint engine was dyno tested with the parts and specifications listed below.  If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet.

 

Part Number: B347FKTKO   

Fuel Delivery Type: Fuel Injected

Spark Plug: BPP7938 (BKR5E/7938)

Spark Plug Gap: .035"

Harmonic Balancer: BPP28 - 28.4 Ounce, 6.4" Diameter

Flexplate/Flywheel: 28.4 Ounce Weighted

Stall Converter: 2000-2400 rpm

Intake Manifold: Dual plane, satin aluminum

Fuel Recommendation: 91 Octane

Timing (Initial/Total Advance): Initial timing - 10-16° and Total timing 32-34°

Firing Order: 1,3,7,2,6,5,4,8

Notes: Recommended oil for your BluePrint Crate Engine: 10W30, Non-Synthetic, Not for EGR

 

Click here to download a copy of the Installation Guide that came with your BluePrint engine.

Add Ons

Add Ons

Check Out This Product and More On Our Pinterest Page