We are experiencing longer than normal build times due to parts and shipping delays, please contact us through live chat for accurate lead times.

BluePrint Engines 400CI Crate Engine | Small Block GM Style | Drop in ready Longblock with Carburetor | Aluminum Heads

$7,899.00

This engine will be dyno tested before it ships to you at no additional charge (others charge $500)!
Part #: BP4002CTC1DK

Description

Dyno Tested Warranty
  • HP & Torque: 508 HP / 473 FT LBS
    Compression Ratio: 10.3:1
    Aluminum Heads
    Hydraulic Roller Cam
    Forged Crank
    Forged Pistons

Block:

  • NEW BluePrint Cast Iron Block
    Manufactured and Machined in the USA!
    4-Bolt Main
    4.125" Bore
    1-Piece Rear Main Seal
    Mech fuel pump provision: Yes
    Passenger Side Dipstick
  • Drilled and tapped for clutch linkage

Rotating Assembly:

  • New BluePrint Forged Crankshaft
    3.750" Stroke
    OEM type 5.700" connecting rods w/ 150,000 psi bolts
    Forged Pistons
    Internal Front/ External Rear

Cylinder Heads:

  • BluePrint Aluminum Cylinder Heads - HP8103
    64cc chamber
    2.08" intake/1.60" exhaust valves
    220cc intake/67cc exhaust runners

Cam Specs:

  • Cam Type: Roller
    .555 Intake .576 Exhaust
    236 Intake / 242 Exhaust duration
    @ .050 - 110 ° lobe separation

    Ignition Timing:

    • 10-16° inital and total timing 32-34° at 3500 RPM

    Also Includes:

    • Intake Manifold dual plane, satin aluminum
      850cfm Carburetor
    • Distributor
    • Valve covers
    • Harmonic balancer
    • Spark plugs
    • Spark plug wires
    • Fuel Pump
    • Oil pan
    • Timing cover
    • Dyno tested and shipped with results
    • Front Accessory Drive with Water Pump, A/C Compressor, Alternator, and Power Steering Pump (Does not fit Corvette)


    Warranty:

    • 30 month / 50,000 mile

    Notes:

    • NEW BluePrint block manufactured and machined in the USA!
      Not for EGR
    • The Aftermarket intake manifold and heads installed on this engine may not be compatible with OEM accessory brackets that use intake or exhaust mounted bosses.
    This engine will be dyno tested before it ships to you at no additional charge (others charge $500)!
    Part #: BP4002CTC1DK

    Description

    Dyno Tested Warranty
    • HP & Torque: 508 HP / 473 FT LBS
      Compression Ratio: 10.3:1
      Aluminum Heads
      Hydraulic Roller Cam
      Forged Crank
      Forged Pistons

    Block:

    • NEW BluePrint Cast Iron Block
      Manufactured and Machined in the USA!
      4-Bolt Main
      4.125" Bore
      1-Piece Rear Main Seal
      Mech fuel pump provision: Yes
      Passenger Side Dipstick
    • Drilled and tapped for clutch linkage

    Rotating Assembly:

    • New BluePrint Forged Crankshaft
      3.750" Stroke
      OEM type 5.700" connecting rods w/ 150,000 psi bolts
      Forged Pistons
      Internal Front/ External Rear

    Cylinder Heads:

    • BluePrint Aluminum Cylinder Heads - HP8103
      64cc chamber
      2.08" intake/1.60" exhaust valves
      220cc intake/67cc exhaust runners

    Cam Specs:

    • Cam Type: Roller
      .555 Intake .576 Exhaust
      236 Intake / 242 Exhaust duration
      @ .050 - 110 ° lobe separation

      Ignition Timing:

      • 10-16° inital and total timing 32-34° at 3500 RPM

      Also Includes:

      • Intake Manifold dual plane, satin aluminum
        850cfm Carburetor
      • Distributor
      • Valve covers
      • Harmonic balancer
      • Spark plugs
      • Spark plug wires
      • Fuel Pump
      • Oil pan
      • Timing cover
      • Dyno tested and shipped with results
      • Front Accessory Drive with Water Pump, A/C Compressor, Alternator, and Power Steering Pump (Does not fit Corvette)


      Warranty:

      • 30 month / 50,000 mile

      Notes:

      • NEW BluePrint block manufactured and machined in the USA!
        Not for EGR
      • The Aftermarket intake manifold and heads installed on this engine may not be compatible with OEM accessory brackets that use intake or exhaust mounted bosses.

      Customer Reviews

      Based on 1 review Write a review

      Your BluePrint engine was dyno tested with the parts and specifications listed below.  If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet.

       

      Part Number: BP4002CTC1DK

      Fuel Delivery Type: Carbureted, 850Cfm

      Spark Plug: BPP7938 NGK 7938 BKR5E

      Spark Plug Gap: .035"

      Harmonic Balancer: BPP350 - Non Weighted, 8" diameter

      Flexplate/Flywheel: Weighted, 1 pc RMS

      Stall Converter: 2400+

      Intake Manifold: Dual plane, satin aluminum

      Fuel Recommendation: 91 Octane

      Timing (Initial/Total Advance): Initial timing - 10-16° and Total timing 32-34°

      Firing Order: 1,8,4,3,6,5,7,2

      Recommended Break in Oil : BPP710 (Click Here)

      Recommended Service Oil : BPP10W30 (Click Here) 

      Recommended Oil Filter ; BPP51061 (Click Here)

      Total Oil capacity with production oil pan, and Correct BPP51061 Filter : 5 Quarts

       

      Click here to download a copy of the Installation Guide that came with your BluePrint engine.

      BP4002CTC1DK Recommended Parts
    • BluePrint Engines 10w30 Engine Oil - 1 Quart

      BPP10W30

      $8.95

    • SBC/BBC OIL FILTER

      BPP51061

      $12.95

    • HEI DISTRIBUTOR 1 PIECE POWER & TACHOMETER PIGTAIL HARNESS

      BPP170072

      $11.95

    • SB CHEVY V8 1-PIECE REAR MAIN SEAL 153 TOOTH FLEXPLATE SFI

      BPP399173

      $120.00

    • Keep Calm And Do a Burnout Black T-Shirt

      BPM01KC-SM

      $25.00

    • Black BluePrint Flag T-Shirt

      BPM01FGB-SM

      $25.00

    • BluePrint Engines Stroke It T-shirt

      $27.00

    • BluePrint Engines Firing Order T-shirt SBC / BBC / Mopar

      BPM01SBC

      $27.00

    • White BluePrint Flag T-Shirt

      $25.00

    • Keep Calm And Do a Burnout White T-Shirt

      $25.00

    • Black BluePrint Flag Hoodie

      $36.00

    • Check Out This Product and More On Our Pinterest Page