BluePrint Engines 383 CI SBC Stroker Crate Engine | Small Block GM Style | Drop in ready Longblock with Carburetor | Aluminum Heads

$6,999.00

This engine will be dyno tested before it ships to you at no additional charge (others charge $500)!
Part #: BP38318CTC1DK

Description

Dyno Tested Warranty Watch the Dyno Video
  • HP & Torque: 436 HP / 443 FT LBS 
    Compression Ratio: 10.0:1
    Aluminum Heads
    Hydraulic Roller Cam
    Cast Steel Crank
    Hypereutectic Pistons

Block:

  • NEW BluePrint Cast Iron Block
    Manufactured and Machined in the USA!
    4-Bolt Main
    4.000" Bore
    1-Piece Rear Main Seal
    Mech fuel pump provision: Yes
    Passenger Side Dipstick
  • Drilled and tapped for clutch linkage

Rotating Assembly:

  • New BluePrint Cast steel crankshaft
    3.750" Stroke
    OEM type 5.700" connecting rods w/ 150,000 psi bolts
    Hypereutectic pistons
    External Front/ External Rear

Cylinder Heads:

  • BluePrint Aluminum Cylinder Heads - H8002K
    64cc chamber
    2.02" intake/1.60" exhaust valves
    195cc intake/75cc exhaust runners

Cam Specs:

  • Cam Type: Roller
    .544 Intake .555 Exhaust
    230 Intake / 236 Exhaust duration
    @ .050, 110 ° lobe separation angle

Ignition Timing:

  • 34 Degrees Total at 3500 RPM

Also Includes:

  • Valve covers
    Harmonic balancer
    Spark plugs
    Spark plug wires
    Long Style Water Pump
    Fuel Pump
    Oil pan
    Timing cover
    Aluminum Intake Manifold
    HEI distributor
    750cfm Carburetor
    Brass freeze plugs
    Dyno tested and shipped with results
  • Front Accessory Drive with Water Pump, A/C Compressor, Alternator, and Power Steering Pump (Does not fit Corvette)
  • Warranty:
  • 30 month / 50,000 mile

Notes:

  • Not for use in pollution controlled vehicles.

    • This engine features a true 4 inch bore, which mathematically yields 377 CID with a 3.75 inch stroke, 


Yellow Exclamation Triangle WARNING: Cancer and Reproductive Harm-
www.P65Warnings.ca.gov

This engine will be dyno tested before it ships to you at no additional charge (others charge $500)!
Part #: BP38318CTC1DK

Description

Dyno Tested Warranty Watch the Dyno Video
  • HP & Torque: 436 HP / 443 FT LBS 
    Compression Ratio: 10.0:1
    Aluminum Heads
    Hydraulic Roller Cam
    Cast Steel Crank
    Hypereutectic Pistons

Block:

  • NEW BluePrint Cast Iron Block
    Manufactured and Machined in the USA!
    4-Bolt Main
    4.000" Bore
    1-Piece Rear Main Seal
    Mech fuel pump provision: Yes
    Passenger Side Dipstick
  • Drilled and tapped for clutch linkage

Rotating Assembly:

  • New BluePrint Cast steel crankshaft
    3.750" Stroke
    OEM type 5.700" connecting rods w/ 150,000 psi bolts
    Hypereutectic pistons
    External Front/ External Rear

Cylinder Heads:

  • BluePrint Aluminum Cylinder Heads - H8002K
    64cc chamber
    2.02" intake/1.60" exhaust valves
    195cc intake/75cc exhaust runners

Cam Specs:

  • Cam Type: Roller
    .544 Intake .555 Exhaust
    230 Intake / 236 Exhaust duration
    @ .050, 110 ° lobe separation angle

Ignition Timing:

  • 34 Degrees Total at 3500 RPM

Also Includes:

  • Valve covers
    Harmonic balancer
    Spark plugs
    Spark plug wires
    Long Style Water Pump
    Fuel Pump
    Oil pan
    Timing cover
    Aluminum Intake Manifold
    HEI distributor
    750cfm Carburetor
    Brass freeze plugs
    Dyno tested and shipped with results
  • Front Accessory Drive with Water Pump, A/C Compressor, Alternator, and Power Steering Pump (Does not fit Corvette)
  • Warranty:
  • 30 month / 50,000 mile

Notes:

  • Not for use in pollution controlled vehicles.

    • This engine features a true 4 inch bore, which mathematically yields 377 CID with a 3.75 inch stroke, 


Yellow Exclamation Triangle WARNING: Cancer and Reproductive Harm-
www.P65Warnings.ca.gov

Customer Reviews

Based on 6 reviews Write a review

Your BluePrint engine was dyno tested with the parts and specifications listed below.  If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet.

 

Part Number: BP38318CTC1DK

Fuel Delivery Type: Carbureted, 750cfm, manual choke

Spark Plug: BPP7938 NGK 7938 BKR5E

Spark Plug Gap: .035"

Harmonic Balancer: BPP400 - 400 ci weighed, 8" diameter

Flexplate/Flywheel: Late 350 Weighted

Stall Converter: 2000-2400 rpm

Intake Manifold: Dual plane, satin aluminum

Fuel Recommendation: 91 Octane

Timing (Initial/Total Advance): Initial timing - 10-16° and Total timing 32-34°

Firing Order: 1,8,4,3,6,5,7,2

Recommended Break in Oil : BPP710 (Click Here)

Recommended Service Oil : BPP10W30 (Click Here) 

Recommended Oil Filter ; BPP51061 (Click Here)

Total Oil capacity with production oil pan, and Correct BPP51061 Filter : 5 Quarts

 

Click here to download a copy of the Installation Guide that came with your BluePrint engine.

BP38318CTC1DK Recommended Parts
  • BluePrint Engines 10w30 Engine Oil - 1 Quart

    BPP10W30

    $8.95

  • SBC/BBC OIL FILTER

    BPP51061

    $12.95

  • HEI DISTRIBUTOR 1 PIECE POWER & TACHOMETER PIGTAIL HARNESS

    BPP170072

    $11.95

  • SB CHEVY V8 1-PIECE REAR MAIN SEAL 153 TOOTH FLEXPLATE SFI

    BPP399173

    $120.00

  • Keep Calm And Do a Burnout Black T-Shirt

    BPM01KC-SM

    $22.00

  • BluePrint Engines Stroke It T-shirt

    $24.00

  • BluePrint Engines Firing Order T-shirt SBC / BBC / Mopar

    BPM01SBC

    $24.00

  • Check Out This Product and More On Our Pinterest Page