BluePrint Engines 364CI Crate Engine | GM LS Style | Longblock | Aluminum Heads | Roller Cam

$6,155.00

Part #:BPLS3640C

Description

HP & Torque: 470 HP / 455 FT LBS*
Compression Ratio: 9.8:1
BluePrint LS3 Aluminum Heads
Hydraulic Roller Cam
Nodular Iron Crankshaft
Forged Pistons

Block:

Cast Iron GM 6.0L block Bored .030 over
OEM Block Machined in the USA!
6-Bolt Main
4.000" Bored .030" over
1-Piece Rear Main Seal

Rotating Assembly:

Cast steel crankshaft
3.622" Stroke
OEM type I-beam 6.125" connecting rods w/ 150,000 psi bolts
Forged Pistons

Cylinder Heads:

BluePrint Aluminum Cylinder Heads -PS8015
72cc chamber
2.165" intake/1.600" exhaust valves
259cc intake/102cc exhaust runners

Cam Specs:

Cam Type: Roller Cam
.566 Intake .566 Exhaust
223 Intake / 223 Exhaust duration
@ .050 - 114 degree lobe separation
ALSO INCLUDES:
Timing Set
oil pump

NOTES:
24X reluctor ring, cam sensor in the back of the block
*Because this engine does not ship with an oil pan, we do not dyno test prior to the engine being shipped. In our development testing, this engine makes 470+ HP and 455+ ft/lbs with the following components:
Cable throttle body
LS3 Factory Intake
LS3 43lb Injectors

Warranty:
30 month / 50,000 mile

SPECIFICATION

REVIEWS

RECOMMENDATIONS

Part #:BPLS3640C

Description

HP & Torque: 470 HP / 455 FT LBS*
Compression Ratio: 9.8:1
BluePrint LS3 Aluminum Heads
Hydraulic Roller Cam
Nodular Iron Crankshaft
Forged Pistons

Block:

Cast Iron GM 6.0L block Bored .030 over
OEM Block Machined in the USA!
6-Bolt Main
4.000" Bored .030" over
1-Piece Rear Main Seal

Rotating Assembly:

Cast steel crankshaft
3.622" Stroke
OEM type I-beam 6.125" connecting rods w/ 150,000 psi bolts
Forged Pistons

Cylinder Heads:

BluePrint Aluminum Cylinder Heads -PS8015
72cc chamber
2.165" intake/1.600" exhaust valves
259cc intake/102cc exhaust runners

Cam Specs:

Cam Type: Roller Cam
.566 Intake .566 Exhaust
223 Intake / 223 Exhaust duration
@ .050 - 114 degree lobe separation
ALSO INCLUDES:
Timing Set
oil pump

NOTES:
24X reluctor ring, cam sensor in the back of the block
*Because this engine does not ship with an oil pan, we do not dyno test prior to the engine being shipped. In our development testing, this engine makes 470+ HP and 455+ ft/lbs with the following components:
Cable throttle body
LS3 Factory Intake
LS3 43lb Injectors

Warranty:
30 month / 50,000 mile

Your BluePrint engine was dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet.

Part Number: BPLS3640C

Fuel Delivery Type: N/A

Spark Plug: Champion 9405

Spark Plug Gap: .040"

Harmonic Balancer: Non Weighted

Flexplate/Flywheel: Non Weighted

Stall Converter: 2200+

Intake Manifold: N/A

Fuel Recommendation: 91 Octane

Timing (Initial/Total Advance):

Firing Order: 1,8,7,2,6,5,4,3

Notes: Recommended break in oil for your BluePrint Crate Engine: BPP710, Not for EGR 24X reluctor ring, cam sensor in the back of the block