BluePrint Engines 355CI Crate Engine | Small Block GM Style | Longblock | Aluminum Heads | Roller Cam
Part #: BP35513CT1 has been superseded to our NEW block BP3505CT CLICK HERE!
Description:
- HP & Torque: 390 HP / 410 FT LBS
Compression Ratio: 10.0:1
Aluminum Heads
Hydraulic Roller Cam
Cast Steel Crankshaft
Hypereutectic Pistons
Block:
- Hand picked seasoned block
Square and parallel decked
Align honed main bearing bore
Cylinders honed on computer controlled machine to within .0002 straightness and roundness
Cylinders are sonic tested for thickness
4-Bolt Main
4.000" Bored .040" Over
1-Piece Rear Main Seal
Mech fuel pump provision: Yes
Passenger Side Dipstick - Drilled and tapped for clutch linkage
Rotating Assembly:
-
Cast Steel Crankshaft
3.480" Stroke
OEM type 5.700" connecting rods
Hypereutectic pistons
Internal Front/ External Rear
Cylinder Heads:
- BluePrint Aluminum Cylinder Heads - H8002K
64cc chamber
2.02" intake/1.60" exhaust valves
195cc intake/75cc exhaust runners
Cam Specs:
- Cam Type: Hyd Roller
.495 Intake .502 Exhaust
220 Intake / 224 Exhaust duration
@ .050 - 114 degree lobe separation
Ignition Timing:
- 34 Degrees Total at 3500 RPM
Also Includes:
- Valve covers
Oil pan
Timing cover
Dyno test results shipped with engine
Warranty:
- 30 month / 50,000 mile
Notes:
-
Not for use in pollution controlled vehicles.
Recommended spark plugs are BPP7938 NGK 7938 BKR5E with .035" gap 
Part #: BP35513CT1 has been superseded to our NEW block BP3505CT CLICK HERE!
Description:
- HP & Torque: 390 HP / 410 FT LBS
Compression Ratio: 10.0:1
Aluminum Heads
Hydraulic Roller Cam
Cast Steel Crankshaft
Hypereutectic Pistons
Block:
- Hand picked seasoned block
Square and parallel decked
Align honed main bearing bore
Cylinders honed on computer controlled machine to within .0002 straightness and roundness
Cylinders are sonic tested for thickness
4-Bolt Main
4.000" Bored .040" Over
1-Piece Rear Main Seal
Mech fuel pump provision: Yes
Passenger Side Dipstick - Drilled and tapped for clutch linkage
Rotating Assembly:
-
Cast Steel Crankshaft
3.480" Stroke
OEM type 5.700" connecting rods
Hypereutectic pistons
Internal Front/ External Rear
Cylinder Heads:
- BluePrint Aluminum Cylinder Heads - H8002K
64cc chamber
2.02" intake/1.60" exhaust valves
195cc intake/75cc exhaust runners
Cam Specs:
- Cam Type: Hyd Roller
.495 Intake .502 Exhaust
220 Intake / 224 Exhaust duration
@ .050 - 114 degree lobe separation
Ignition Timing:
- 34 Degrees Total at 3500 RPM
Also Includes:
- Valve covers
Oil pan
Timing cover
Dyno test results shipped with engine
Warranty:
- 30 month / 50,000 mile
Notes:
-
Not for use in pollution controlled vehicles.
Recommended spark plugs are BPP7938 NGK 7938 BKR5E with .035" gap
Customer Reviews
Your BluePrint engine was dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet.
Part Number: BP35513CTC1
Fuel Delivery Type: Carbureted, 600 cfm, electric choke
Spark Plug: BPP7938 NGK 7938 BKR5E
Spark Plug Gap: .035"
Harmonic Balancer: BPP350 - Non Weighted, 8" diameter
Flexplate/Flywheel: Late 350 Weighted
Stall Converter: 2000-2400 rpm
Intake Manifold: Dual plane, satin aluminum
Fuel Recommendation: 91 Octane
Timing (Initial/Total Advance): Initial timing - 10-16° and Total timing 32-34°
Firing Order: 1,8,4,3,6,5,7,2
Recommended Break in Oil : BPP710 (Click Here)
Recommended Service Oil : BPP10W30 (Click Here)
Recommended Oil Filter ; BPP51061 (Click Here)
Total Oil capacity with production oil pan, and Correct BPP51061 Filter : 5 Quarts
Click here to download a copy of the Installation Guide that came with your BluePrint engine.