BluePrint Engines 632CI ProSeries Stroker Crate Engine | Big Block GM Style | Longblock | Aluminum Heads | Roller Cam

$9,999.00
This engine will be dyno tested before it ships to you at no additional charge (others charge $500)!
Part #: PS6320CT

Description

Dyno Tested Warranty
  • HP & Torque: 815 HP / 775 FT LBS
    Compression Ratio: 11.0:1
    Aluminum Heads
    Hydraulic Roller Cam
    Forged Crank
    Forged Pistons

Block:

  • NEW BluePrint Cast Iron Block
  • Manufactured and Machined in the USA!
  • 4-Bolt Main
  • 4.600" Bore
  • 1-Piece Rear Main Seal
  • Mech fuel pump provision: Yes
  • Tall Deck (Cyl Deck is Approx .400 taller / wider  than oem block)

    Rotating Assembly:

    • New BluePrint Forged Crankshaft
      4.750" Stroke
      Forged H-beam 6.635" connecting rods
      Forged Pistons
      Internal

    Cylinder Heads:

    • BluePrint Aluminum Cylinder Heads -PS8012
    • 119cc chamber
    • 2.30" intake/1.88" exhaust valves
    • 358cc intake/125cc exhaust runners
    • Cylinder heads feature a .300 in. raised exhaust port vs an OEM casting.
    • Must verify clearance of exhaust,shift linkage, steering components etc. before ordering.

    Cam Specs:

    • Cam Type: Roller
      .698 / .698 Lift
      272 / 282 duration @ .050 - 110 degree LSA

      Also Includes:

      • Valve covers, oil pan and timing cover
        Harmonic balancer
        Dyno test results shipped with engine

      Warranty:

      30 month / 50,000 mile

        Notes:

        • Not for use in pollution controlled vehicles.
        • This engine features .300 raised exhaust ports and .400 deck height increase over OEM.
        • Must verify clearance of exhaust, shift linkage, steering components etc. before ordering.

        Yellow Exclamation Triangle WARNING: Cancer and Reproductive Harm-
        www.P65Warnings.ca.gov

        This engine will be dyno tested before it ships to you at no additional charge (others charge $500)!
        Part #: PS6320CT

        Description

        Dyno Tested Warranty
        • HP & Torque: 815 HP / 775 FT LBS
          Compression Ratio: 11.0:1
          Aluminum Heads
          Hydraulic Roller Cam
          Forged Crank
          Forged Pistons

        Block:

        • NEW BluePrint Cast Iron Block
        • Manufactured and Machined in the USA!
        • 4-Bolt Main
        • 4.600" Bore
        • 1-Piece Rear Main Seal
        • Mech fuel pump provision: Yes
        • Tall Deck (Cyl Deck is Approx .400 taller / wider  than oem block)

          Rotating Assembly:

          • New BluePrint Forged Crankshaft
            4.750" Stroke
            Forged H-beam 6.635" connecting rods
            Forged Pistons
            Internal

          Cylinder Heads:

          • BluePrint Aluminum Cylinder Heads -PS8012
          • 119cc chamber
          • 2.30" intake/1.88" exhaust valves
          • 358cc intake/125cc exhaust runners
          • Cylinder heads feature a .300 in. raised exhaust port vs an OEM casting.
          • Must verify clearance of exhaust,shift linkage, steering components etc. before ordering.

          Cam Specs:

          • Cam Type: Roller
            .698 / .698 Lift
            272 / 282 duration @ .050 - 110 degree LSA

            Also Includes:

            • Valve covers, oil pan and timing cover
              Harmonic balancer
              Dyno test results shipped with engine

            Warranty:

            30 month / 50,000 mile

              Notes:

              • Not for use in pollution controlled vehicles.
              • This engine features .300 raised exhaust ports and .400 deck height increase over OEM.
              • Must verify clearance of exhaust, shift linkage, steering components etc. before ordering.

              Yellow Exclamation Triangle WARNING: Cancer and Reproductive Harm-
              www.P65Warnings.ca.gov

              Your BluePrint engine was dyno tested with the parts and specifications listed below.  If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet.

               

              Part Number: PS6320CT

              Fuel Delivery Type: Carbureted, 1050cfm recommended

              Spark Plug: Champion 792

              Spark Plug Gap: .035"

              Harmonic Balancer: Non-Weighted

              Flexplate/Flywheel: Non-Weighted

              Stall Converter: 2200+

              Intake Manifold: Single plane, satin aluminum

              Fuel Recommendation: 91 Octane

              Timing (Initial/Total Advance): Initial timing - 10-16° and Total timing 32-34°. If using a dominator style carb, initial timing 16-20 and total timing of 32-34 by 2500 RPM.

              Firing Order: 1,8,4,3,6,5,7,2

              Notes: New BluePrint block manufactured and machined in the USA. Recommended break in oil for your BluePrint Crate Engine: BPP710, Not for EGR

               

              Click here to download a copy of the Installation Guide that came with your BluePrint engine.

              Check Out This Product and More On Our Pinterest Page