BluePrint Engines 540CI ProSeries Stroker Crate Engine | Big Block GM Style | Dressed Longblock with Carburetor | Aluminum Heads | Roller Cam

$10,999.00

This engine will be dyno tested before it ships to you at no additional charge (others charge $500)!
Part #: PS5401CTC

Description

Dyno Tested Warranty
  • HP & Torque: 670 HP / 660 FT LBS
    Compression Ratio: 10.0:1
    Aluminum Heads
    Hydraulic Roller Cam
    Forged Crank
    Forged Pistons

Block:

  • NEW BluePrint Cast Iron Block
    Manufactured and Machined in the USA!
    4-Bolt Main
    4.500" Bore
    1-Piece Rear Main Seal
    Mech fuel pump provision: Yes
    Standard Deck

Rotating Assembly:

  • New BluePrint Forged Crankshaft
    4.250" Stroke
    Forged H-beam 6.385" connecting rods
    Forged Pistons
    Internal

Cylinder Heads:

  • BluePrint Aluminum Cylinder Heads -PS8013
  • 119cc chamber
  • 2.30" intake/1.88" exhaust valves
  • 316cc intake/124cc exhaust runners
  • Cylinder heads feature a .300 in. raised exhaust port vs an OEM casting.
  • Must verify header/exhaust clearance

Cam Specs:

  • Cam Type: Roller
    .647 Intake .647 Exhaust
    248 Intake / 254 Exhaust duration
    @ .050 - 112 degree lobe separation

    Also Includes:

    • 850cfm carb
      Aluminum intake manifold
      MSD Pro Billet distributor
      Valve covers, oil pan and timing cover
      spark plugs
      Spark plug wires
      Harmonic balancer
      Dyno test results shipped with engine

    Warranty:

     30 month / 50,000 mile

     

    Notes:

    • New BluePrint block manufactured and machined in the USA.
    • Not for EGR
    • Cylinder heads feature a .300 in. raised exhaust port vs an OEM casting
    • Must verify header/exhaust clearance

     

      Yellow Exclamation Triangle WARNING: Cancer and Reproductive Harm-
      www.P65Warnings.ca.gov

      This engine will be dyno tested before it ships to you at no additional charge (others charge $500)!
      Part #: PS5401CTC

      Description

      Dyno Tested Warranty
      • HP & Torque: 670 HP / 660 FT LBS
        Compression Ratio: 10.0:1
        Aluminum Heads
        Hydraulic Roller Cam
        Forged Crank
        Forged Pistons

      Block:

      • NEW BluePrint Cast Iron Block
        Manufactured and Machined in the USA!
        4-Bolt Main
        4.500" Bore
        1-Piece Rear Main Seal
        Mech fuel pump provision: Yes
        Standard Deck

      Rotating Assembly:

      • New BluePrint Forged Crankshaft
        4.250" Stroke
        Forged H-beam 6.385" connecting rods
        Forged Pistons
        Internal

      Cylinder Heads:

      • BluePrint Aluminum Cylinder Heads -PS8013
      • 119cc chamber
      • 2.30" intake/1.88" exhaust valves
      • 316cc intake/124cc exhaust runners
      • Cylinder heads feature a .300 in. raised exhaust port vs an OEM casting.
      • Must verify header/exhaust clearance

      Cam Specs:

      • Cam Type: Roller
        .647 Intake .647 Exhaust
        248 Intake / 254 Exhaust duration
        @ .050 - 112 degree lobe separation

        Also Includes:

        • 850cfm carb
          Aluminum intake manifold
          MSD Pro Billet distributor
          Valve covers, oil pan and timing cover
          spark plugs
          Spark plug wires
          Harmonic balancer
          Dyno test results shipped with engine

        Warranty:

         30 month / 50,000 mile

         

        Notes:

        • New BluePrint block manufactured and machined in the USA.
        • Not for EGR
        • Cylinder heads feature a .300 in. raised exhaust port vs an OEM casting
        • Must verify header/exhaust clearance

         

          Yellow Exclamation Triangle WARNING: Cancer and Reproductive Harm-
          www.P65Warnings.ca.gov

          Customer Reviews

          Based on 2 reviews Write a review

          Your BluePrint engine was dyno tested with the parts and specifications listed below.  If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet.

           

          Part Number: PS5401CTC

          Fuel Delivery Type: Carbureted, 850cfm

          Spark Plug: Champion 792

          Spark Plug Gap: .035"

          Harmonic Balancer: Non-Weighted

          Flexplate/Flywheel: Non-Weighted

          Stall Converter: 2200+

          Intake Manifold: Single Plane, Satin Aluminum

          Fuel Recommendation: 91 Octane

          Timing (Initial/Total Advance): Initial timing - 10-16° and Total timing 32-34°

          Firing Order: 1,8,4,3,6,5,7,2

          Notes: New BluePrint block manufactured and machined in the USA. Recommended break in oil for your BluePrint Crate Engine: BPP710, Not for EGR

           

          Click here to download a copy of the Installation Guide that came with your BluePrint engine.

          Check Out This Product and More On Our Pinterest Page