BluePrint Engines 496CI Stroker Crate Engine | Big Block GM Style | Dressed Longblock with Carburetor | Aluminum Heads | Roller Cam

$8,370.00
This engine will be dyno tested before it ships to you at no additional charge (others charge $500)!
Part #: BP4962CTC

Description

  • HP & Torque: 600 HP / 568 FT LBS
    Compression Ratio: 9.6:1
    Aluminum Heads
    Hydraulic Roller Cam
    Forged Crank
    Hypereutectic Pistons

Block:

  • Hand picked seasoned block
    Square and parallel decked
    Align honed main bearing bore
    Cylinders honed on computer controlled machine to within .0002 straightness and roundness
    Cylinders are sonic tested for thickness
    2-Bolt Main
    4.250" Bored .060" over
    1-Piece Rear Main Seal
    Mech fuel pump provision: No
    Standard Deck

Rotating Assembly:

  • New BluePrint Forged Crankshaft
    4.250" Stroke
    OEM type 6.385" connecting rods w/ 150,000 psi bolts
    Hypereutectic pistons
    External Balance

Cylinder Heads:

  • BluePrint Aluminum Cylinder Heads - PS8013
    119cc chamber
    2.30" intake/1.88" exhaust valves
    316cc intake/124cc exhaust runners

Cam Specs:

  • Cam Type: Roller
    .566 Intake .566 Exhaust
    242 Intake / 248 Exhaust duration
    @ .050 - 112 degree lobe separation

Ignition Timing:

  • 34 degrees total at 3500 RPM

Also Includes:

  • Aluminum intake manifold
    850 cfm carburetor
    Distributor
    Valve covers
    Oil pan
    Brass freeze plugs

Warranty:

  • 30 month / 50,000 mile

Notes:

  • Not for use in pollution controlled vehicles.

Yellow Exclamation Triangle WARNING: Cancer and Reproductive Harm-
www.P65Warnings.ca.gov

This engine will be dyno tested before it ships to you at no additional charge (others charge $500)!
Part #: BP4962CTC

Description

  • HP & Torque: 600 HP / 568 FT LBS
    Compression Ratio: 9.6:1
    Aluminum Heads
    Hydraulic Roller Cam
    Forged Crank
    Hypereutectic Pistons

Block:

  • Hand picked seasoned block
    Square and parallel decked
    Align honed main bearing bore
    Cylinders honed on computer controlled machine to within .0002 straightness and roundness
    Cylinders are sonic tested for thickness
    2-Bolt Main
    4.250" Bored .060" over
    1-Piece Rear Main Seal
    Mech fuel pump provision: No
    Standard Deck

Rotating Assembly:

  • New BluePrint Forged Crankshaft
    4.250" Stroke
    OEM type 6.385" connecting rods w/ 150,000 psi bolts
    Hypereutectic pistons
    External Balance

Cylinder Heads:

  • BluePrint Aluminum Cylinder Heads - PS8013
    119cc chamber
    2.30" intake/1.88" exhaust valves
    316cc intake/124cc exhaust runners

Cam Specs:

  • Cam Type: Roller
    .566 Intake .566 Exhaust
    242 Intake / 248 Exhaust duration
    @ .050 - 112 degree lobe separation

Ignition Timing:

  • 34 degrees total at 3500 RPM

Also Includes:

  • Aluminum intake manifold
    850 cfm carburetor
    Distributor
    Valve covers
    Oil pan
    Brass freeze plugs

Warranty:

  • 30 month / 50,000 mile

Notes:

  • Not for use in pollution controlled vehicles.

Yellow Exclamation Triangle WARNING: Cancer and Reproductive Harm-
www.P65Warnings.ca.gov

Your BluePrint engine was dyno tested with the parts and specifications listed below.  If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet.

 

Part Number: BP4962CTC

Fuel Delivery Type: Carbureted, 850cfm, Manual choke

Spark Plug: Champion 792

Spark Plug Gap: .045"

Harmonic Balancer: Weighted, 8" diameter

Flexplate/Flywheel: Weighted

Stall Converter: 2000-2400 rpm

Intake Manifold: Single plane, satin aluminum

Fuel Recommendation: 91 Octane

Timing (Initial/Total Advance): Initial timing - 10-16° and Total timing 32-34°

Firing Order: 1,8,4,3,6,5,7,2

Notes: Recommended break in oil for your BluePrint Crate Engine:BPP710, Not for EGR

 

Click here to download a copy of the Installation Guide that came with your BluePrint engine.

Check Out This Product and More On Our Pinterest Page