BluePrint Engines 408CI Stroker Crate Engine | Small Block Ford Style | Longblock | Aluminum Heads | Forged Pistons | Roller Cam

$5,499.00
This engine will be dyno tested before it ships to you at no additional charge (others charge $500)!
Part #: BPF4088CT

Description:  

Dyno Tested Warranty
  • HP & Torque: 425 HP / 455 FT LBS
    Compression Ratio: 9.8:1
    Aluminum Heads
    Hydraulic Roller Cam
    Cast Steel Crank
  • Forged Pistons

Block:

  • Hand picked seasoned block
  • Square and parallel decked
  • Alighted honed main bearing bore
  • Bylinders honed on computer controlled machine to within .0002 straightness and roundness
  • Cylinders are conic tested for thickness
  • 2-Bolt Main
    4.000" Bored
  • 1-Piece Rear Main Seal
  • Mech fuel pump provision: yes

Rotating Assembly:

  • New Cast steel crankshaft
    4.000" Stroke
    Forged I-Beam 6.200" connecting rods
  • Forged Pistons
  • Internal Balance

Cylinder Heads:

  • BluePrint Aluminum Cylinder Heads -HP9009
  • 60cc chamber
  • 2.02" intake/1.60" exhaust valves
  • 90cc intake/65cc exhaust runners

Cam Specs:

  • Roller
  • .543 Intake / .554 Exhaust
  • 218 Intake / 226 Exhaust duration @ .050 - 112 degree lobe separation

Ignition Timing:

  • 34 degrees total at 3500 RPM

Also Includes:

  • Oil pan, timing cover and valve covers
    Dyno tested and shipped with results

Warranty:

  • 30 month / 50,000 mile

Notes:

  • Not for use in pollution controlled vehicles.
    *A bronze distributor gear is NOT recommended on this engine

Yellow Exclamation Triangle WARNING: Cancer and Reproductive Harm-
www.P65Warnings.ca.gov

This engine will be dyno tested before it ships to you at no additional charge (others charge $500)!
Part #: BPF4088CT

Description:  

Dyno Tested Warranty
  • HP & Torque: 425 HP / 455 FT LBS
    Compression Ratio: 9.8:1
    Aluminum Heads
    Hydraulic Roller Cam
    Cast Steel Crank
  • Forged Pistons

Block:

  • Hand picked seasoned block
  • Square and parallel decked
  • Alighted honed main bearing bore
  • Bylinders honed on computer controlled machine to within .0002 straightness and roundness
  • Cylinders are conic tested for thickness
  • 2-Bolt Main
    4.000" Bored
  • 1-Piece Rear Main Seal
  • Mech fuel pump provision: yes

Rotating Assembly:

  • New Cast steel crankshaft
    4.000" Stroke
    Forged I-Beam 6.200" connecting rods
  • Forged Pistons
  • Internal Balance

Cylinder Heads:

  • BluePrint Aluminum Cylinder Heads -HP9009
  • 60cc chamber
  • 2.02" intake/1.60" exhaust valves
  • 90cc intake/65cc exhaust runners

Cam Specs:

  • Roller
  • .543 Intake / .554 Exhaust
  • 218 Intake / 226 Exhaust duration @ .050 - 112 degree lobe separation

Ignition Timing:

  • 34 degrees total at 3500 RPM

Also Includes:

  • Oil pan, timing cover and valve covers
    Dyno tested and shipped with results

Warranty:

  • 30 month / 50,000 mile

Notes:

  • Not for use in pollution controlled vehicles.
    *A bronze distributor gear is NOT recommended on this engine

Yellow Exclamation Triangle WARNING: Cancer and Reproductive Harm-
www.P65Warnings.ca.gov

Your BluePrint engine was dyno tested with the parts and specifications listed below.  If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet.

 

Part Number: BPF4088CT

Fuel Delivery Type: Carbureted, 750cfm ** Not included**

Spark Plug: Champion 792

Spark Plug Gap: .045"

Harmonic Balancer:  Neutral Balance, 6.4" Diameter

Flexplate/Flywheel:  Neutral Balance, Non Weighted

Stall Converter: 2000-2400 rpm

Intake Manifold: Dual plane, satin aluminum

Fuel Recommendation: 91 Octane

Timing (Initial/Total Advance): Initial timing - 10-16° and Total timing 32-34°

Firing Order: 1,3,7,2,6,5,4,8

Notes: Recommended break in oil for your BluePrint Crate Engine:BPP710, Not for EGR

 

Click here to download a copy of the Installation Guide that came with your BluePrint engine.

Check Out This Product and More On Our Pinterest Page