BluePrint Engines 376CI Crate Engine | GM LS3 Style | Aluminum Heads | Roller Cam | 6.2L
Description
- HP & Torque: 530 HP / 495 FT LBS
Compression Ratio: 10.7:1
Aluminum Heads
Hydraulic Roller Cam
Nodular Iron Crankshaft
Hypereutectic Pistons
Block:
-
New GM Aluminum 6.2L block
OEM Block Machined in the USA!
6-Bolt Main
1-Piece Rear Main Seal
Rotating Assembly:
- Nodular Iron crankshaft
3.622" Stroke - 6.098" connecting rods w/ 150,000 psi bolts
Hypereutectic Pistons
Internally Balanced
Cylinder Heads:
- BluePrint Aluminum Cylinder Heads -PS8015
72cc chamber
2.165" intake/1.600" exhaust valves
259cc intake/102cc exhaust runners
Cam Specs:
- Cam Type: Roller Cam
- .612 Intake .585 Exhaust
225 Intake / 238 Exhaust duration
@ .050 - 113 degree lobe separation, 110 ICL
Ignition Timing:
Also Includes:
GM Musclecar Swap Oil Pan
90mm DBW Throttle Body
Loaded Intake Manifold
Fuel Injectors and Rail
Coil Packs
Spark Plugs and Wires
Waterpump
Harmonic Balancer
Warranty:
- 30 month / 50,000 mile
Notes:
Engine is not shipped with Engine controller kit. Must purchase separately for your application. Controller kit can be found by part number BPPLS530
- $7,399 Longblock Includes: Intake manifold, waterpump, Oil pan, timing cover, valve covers, harmonic balancer and individual dyno results
- $8,799 Dressed Longblock with Polished Pulley Kit: Above plus polished pulley kit. Includes alternator, air conditioning and power steering
- $8,899 Dressed Longblock with Black Pulley Kit: Above plus black pulley kit. Includes alternator, air conditioning and power steering
WARNING: Cancer and Reproductive Harm-
www.P65Warnings.ca.gov
Description
- HP & Torque: 530 HP / 495 FT LBS
Compression Ratio: 10.7:1
Aluminum Heads
Hydraulic Roller Cam
Nodular Iron Crankshaft
Hypereutectic Pistons
Block:
-
New GM Aluminum 6.2L block
OEM Block Machined in the USA!
6-Bolt Main
1-Piece Rear Main Seal
Rotating Assembly:
- Nodular Iron crankshaft
3.622" Stroke - 6.098" connecting rods w/ 150,000 psi bolts
Hypereutectic Pistons
Internally Balanced
Cylinder Heads:
- BluePrint Aluminum Cylinder Heads -PS8015
72cc chamber
2.165" intake/1.600" exhaust valves
259cc intake/102cc exhaust runners
Cam Specs:
- Cam Type: Roller Cam
- .612 Intake .585 Exhaust
225 Intake / 238 Exhaust duration
@ .050 - 113 degree lobe separation, 110 ICL
Ignition Timing:
Also Includes:
GM Musclecar Swap Oil Pan
90mm DBW Throttle Body
Loaded Intake Manifold
Fuel Injectors and Rail
Coil Packs
Spark Plugs and Wires
Waterpump
Harmonic Balancer
Warranty:
- 30 month / 50,000 mile
Notes:
Engine is not shipped with Engine controller kit. Must purchase separately for your application. Controller kit can be found by part number BPPLS530
- $7,399 Longblock Includes: Intake manifold, waterpump, Oil pan, timing cover, valve covers, harmonic balancer and individual dyno results
- $8,799 Dressed Longblock with Polished Pulley Kit: Above plus polished pulley kit. Includes alternator, air conditioning and power steering
- $8,899 Dressed Longblock with Black Pulley Kit: Above plus black pulley kit. Includes alternator, air conditioning and power steering
WARNING: Cancer and Reproductive Harm-
www.P65Warnings.ca.gov
Your BluePrint engine was dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet.
Part Number: PSLS3760CTF
Fuel Delivery Type: Fuel Injection
Spark Plug: Champion 9405
Spark Plug Gap: .040"
Harmonic Balancer: Non Weighted
Flexplate/Flywheel: Non Weighted
Stall Converter: 2200+
Intake Manifold: N/A
Fuel Recommendation: 91 Octane
Timing (Initial/Total Advance):
Firing Order: 1,8,7,2,6,5,4,3
Notes: Recommended break in oil for your BluePrint Crate Engine: BPP710
Engine features a 58x reluctor wheel and 4x cam sensor. Knock sensor provision located on side of block. Cam sensor located in timing cover. utilizes EV6 type injector
Click here to download a copy of the Installation Guide that came with your BluePrint engine.