BluePrint Engines 355CI Crate Engine | Small Block GM Style | Base Dressed Longblock with Carburetor | Aluminum Heads | Roller Cam

$4,789.00

Part #: BP35513CTC1 has ben superseded to NEW BLOCK BP3505CTC Click here!!

Description:

HP & Torque: 390 HP / 410 FT LBS
Compression Ratio: 10.0:1
Aluminum Heads
Hydraulic Roller Cam
Cast Steel Crankshaft
Hypereutectic Pistons

Block:

Hand picked seasoned block
Square and parallel decked
Align honed main bearing bore
Cylinders honed on computer controlled machine to within .0002 straightness and roundness
Cylinders are sonic tested for thickness
4-Bolt Main
4.000" Bored .040" Over
1-Piece Rear Main Seal
Mech fuel pump provision: Yes
Passenger Side Dipstick
Drilled and tapped for clutch linkage

Rotating Assembly:

Cast Steel Crankshaft
3.480" Stroke
OEM type 5.700" connecting rods
Hypereutectic pistons
Internal Front/ External Rear

Cylinder Heads:

BluePrint Aluminum Cylinder Heads - H8002K
64cc chamber
2.02" intake/1.60" exhaust valves
195cc intake/75cc exhaust runners

Cam Specs:

Cam Type: Hyd Roller
.495 Intake .502 Exhaust
220 Intake / 224 Exhaust duration
@ .050 - 114 degree lobe separation

Ignition Timing:

34 Degrees Total at 3500 RPM

Also Includes:

New valve covers
Oil pan
Timing cover
Aluminum intake
HEI distributor
600 cfm carburetor
Dyno test results shipped with engine

Warranty:

30 month / 50,000 mile

Notes:

Not for use in pollution controlled vehicles.
Recommended spark plugs are BPP7938 NGK 7938 BKR5E with .035" gap
The Aftermarket intake manifold installed on this engine may not be compatible with OEM accessory brackets that use intake mounted bosses.

SPECIFICATION

REVIEWS

RECOMMENDATIONS

Part #: BP35513CTC1 has ben superseded to NEW BLOCK BP3505CTC Click here!!

Description:

HP & Torque: 390 HP / 410 FT LBS
Compression Ratio: 10.0:1
Aluminum Heads
Hydraulic Roller Cam
Cast Steel Crankshaft
Hypereutectic Pistons

Block:

Hand picked seasoned block
Square and parallel decked
Align honed main bearing bore
Cylinders honed on computer controlled machine to within .0002 straightness and roundness
Cylinders are sonic tested for thickness
4-Bolt Main
4.000" Bored .040" Over
1-Piece Rear Main Seal
Mech fuel pump provision: Yes
Passenger Side Dipstick
Drilled and tapped for clutch linkage

Rotating Assembly:

Cast Steel Crankshaft
3.480" Stroke
OEM type 5.700" connecting rods
Hypereutectic pistons
Internal Front/ External Rear

Cylinder Heads:

BluePrint Aluminum Cylinder Heads - H8002K
64cc chamber
2.02" intake/1.60" exhaust valves
195cc intake/75cc exhaust runners

Cam Specs:

Cam Type: Hyd Roller
.495 Intake .502 Exhaust
220 Intake / 224 Exhaust duration
@ .050 - 114 degree lobe separation

Ignition Timing:

34 Degrees Total at 3500 RPM

Also Includes:

New valve covers
Oil pan
Timing cover
Aluminum intake
HEI distributor
600 cfm carburetor
Dyno test results shipped with engine

Warranty:

30 month / 50,000 mile

Notes:

Not for use in pollution controlled vehicles.
Recommended spark plugs are BPP7938 NGK 7938 BKR5E with .035" gap
The Aftermarket intake manifold installed on this engine may not be compatible with OEM accessory brackets that use intake mounted bosses.

Customer Reviews

Based on 1 review Write a review

Your BluePrint engine was dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet.

Part Number: BP35513CTC1

Fuel Delivery Type: Carbureted, 600 cfm, electric choke

Spark Plug: BPP7938 NGK 7938 BKR5E

Spark Plug Gap: .035"

Harmonic Balancer: BPP350 - Non Weighted, 8" diameter

Flexplate/Flywheel: Late 350 Weighted

Stall Converter: 2000-2400 rpm

Intake Manifold: Dual plane, satin aluminum

Fuel Recommendation: 91 Octane

Timing (Initial/Total Advance): Initial timing - 10-16° and Total timing 32-34°

Firing Order: 1,8,4,3,6,5,7,2

Recommended Break in Oil : BPP710 (Click Here)