350CI Crate Engine | Small Block GM Style | Longblock

$3,699.00

This engine will be dyno tested before it ships to you at no additional charge (others charge $500)!

Part Number: BP3501CT1

Description: 

Dyno Tested Warranty
  • HP & Torque: 365 HP / 405 FT LBS
    Compression Ratio: 9.1:1
    Cast Iron Heads
    Roller Cam
    Cast Steel Crank
    Hypereutectic Pistons

    Block:

    • NEW BluePrint Cast Iron Block
      Manufactured and Machined in the USA!
      4-Bolt Main
      4.000" Bore
      1-Piece Rear Main Seal
      Mech fuel pump provision: Yes
      Passenger Side Dipstick
    • Drilled and tapped for clutch linkage

      Rotating Assembly:

      • Cast steel crankshaft
        3.480" Stroke
        OEM type 5.700" connecting rods
        Hypereutectic pistons
        Internal Front/ External Rear

        Cylinder Heads:

        • Vortec cast iron heads; 64cc chamber
          Hardened retainers and springs
          1.94 intake valves
          1.50 exhaust valves

          Cam Specs:

          • Cam Type: Roller
            .495 Intake .502 Exhaust
            220 Intake / 224 Exhaust duration
            @ .050 - 114 degree lobe separation
            Using 1.5 rockers

            Ignition Timing:

            • 10-16 degrees initial, 32 -34 total


              Warranty:

              • 30 month / 50,000 mile

              Notes:

              • Recommended Oil For Your BluePrint Crate Engine: BPP710, BluePrint Engines break in oil
                Not for EGR

                Yellow Exclamation Triangle WARNING: Cancer and Reproductive Harm-
                www.P65Warnings.ca.gov

                This engine will be dyno tested before it ships to you at no additional charge (others charge $500)!

                Part Number: BP3501CT1

                Description: 

                Dyno Tested Warranty
                • HP & Torque: 365 HP / 405 FT LBS
                  Compression Ratio: 9.1:1
                  Cast Iron Heads
                  Roller Cam
                  Cast Steel Crank
                  Hypereutectic Pistons

                  Block:

                  • NEW BluePrint Cast Iron Block
                    Manufactured and Machined in the USA!
                    4-Bolt Main
                    4.000" Bore
                    1-Piece Rear Main Seal
                    Mech fuel pump provision: Yes
                    Passenger Side Dipstick
                  • Drilled and tapped for clutch linkage

                    Rotating Assembly:

                    • Cast steel crankshaft
                      3.480" Stroke
                      OEM type 5.700" connecting rods
                      Hypereutectic pistons
                      Internal Front/ External Rear

                      Cylinder Heads:

                      • Vortec cast iron heads; 64cc chamber
                        Hardened retainers and springs
                        1.94 intake valves
                        1.50 exhaust valves

                        Cam Specs:

                        • Cam Type: Roller
                          .495 Intake .502 Exhaust
                          220 Intake / 224 Exhaust duration
                          @ .050 - 114 degree lobe separation
                          Using 1.5 rockers

                          Ignition Timing:

                          • 10-16 degrees initial, 32 -34 total


                            Warranty:

                            • 30 month / 50,000 mile

                            Notes:

                            • Recommended Oil For Your BluePrint Crate Engine: BPP710, BluePrint Engines break in oil
                              Not for EGR

                              Yellow Exclamation Triangle WARNING: Cancer and Reproductive Harm-
                              www.P65Warnings.ca.gov

                              Customer Reviews

                              Based on 1 review Write a review

                              Your BluePrint engine was dyno tested with the parts and specifications listed below.  If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet.

                               

                              Part Number: BP3501CTC1 / BP3501CTC1K

                              Fuel Delivery Type: Carbureted, 600 cfm

                              Spark Plug: AC Delco 41-993

                              Spark Plug Gap: .045"

                              Harmonic Balancer: Non Weighted - 8" diameter

                              Flexplate/Flywheel: Late 350 Weighted

                              Stall Converter: 1800-2200 rpm

                              Intake Manifold: Satin aluminum, Dual Plane, non-airgap

                              Fuel Recommendation: 87 Octane

                              Timing (Initial/Total Advance): Initial timing - 10-16° and Total timing 32-34°

                              Firing Order: 1,8,4,3,6,5,7,2

                              Recommended Break in Oil : BPP710 (Click Here)

                              Recommended Service Oil : BPP10W30 (Click Here) 

                              Recommended Oil Filter ; BPP51061 (Click Here)

                              Total Oil capacity with production oil pan, and Correct BPP51061 Filter : 5 Quarts

                               

                              Click here to download a copy of the Installation Guide that came with your BluePrint engine.

                              Check Out This Product and More On Our Pinterest Page