350CI Crate Engine | Small Block GM Style | Dressed Longblock | Complete Drop In with Pulley Kit
This engine will be dyno tested before it ships to you at no additional charge (others charge $500)!
Part Number: BP3501CTC1K
Description:


- HP & Torque: 365 HP / 405 FT LBS
Compression Ratio: 9.1:1
Cast Iron Heads
Roller Cam
Cast Steel Crank
Hypereutectic Pistons
Block:
- Hand picked seasoned block
Square and parallel decked
Align honed main bearing bore
Cylinders honed on computer controlled machine to within .0002 straightness and roundness
Cylinders are sonic tested for thickness
4-Bolt Main
4.000" Bored .040" Over
1-Piece Rear Main Seal
Mech fuel pump provision: Yes
Passenger Side Dipstick Drilled and tapped for clutch linkage
Rotating Assembly:
- Cast steel crankshaft
3.480" Stroke
OEM type 5.700" connecting rods w/ 150,000 psi bolts
Hypereutectic pistons
Internal Front/ External Rear
Cylinder Heads:
- Vortec cast iron heads; 64cc chamber
Hardened retainers and springs
1.94 intake valves
1.50 exhaust valves
Cam Specs:
- Cam Type: Roller
.495 Intake .502 Exhaust
220 Intake / 224 Exhaust duration
@ .050 - 114 degree lobe separation
Using 1.5 rockers
Ignition Timing:
-
10-16 degrees initial, 32 -34 total
Also Includes:
- Valve covers
Oil pan
Thermostat, thermostat housing
Timing cover
Chrome air cleaner - Intake Manifold
- 600cfm carburetor
- HEI Distributor
- Spark plugs and wires
- Harmonic balancer
- Complete Front Accessory Drive with P/S. A/C, Alternator.
Warranty:
- 30 month / 50,000 mile
Notes:
- Recommended Oil For Your BluePrint Crate Engine: BPP710, BluePrint Engines break in oil
Not for EGR - Front pulley kit comes installed. Pulley kit does NOT fit Corvette.
WARNING: Cancer and Reproductive Harm-
www.P65Warnings.ca.gov
This engine will be dyno tested before it ships to you at no additional charge (others charge $500)!
Part Number: BP3501CTC1K
Description:


- HP & Torque: 365 HP / 405 FT LBS
Compression Ratio: 9.1:1
Cast Iron Heads
Roller Cam
Cast Steel Crank
Hypereutectic Pistons
Block:
- Hand picked seasoned block
Square and parallel decked
Align honed main bearing bore
Cylinders honed on computer controlled machine to within .0002 straightness and roundness
Cylinders are sonic tested for thickness
4-Bolt Main
4.000" Bored .040" Over
1-Piece Rear Main Seal
Mech fuel pump provision: Yes
Passenger Side Dipstick Drilled and tapped for clutch linkage
Rotating Assembly:
- Cast steel crankshaft
3.480" Stroke
OEM type 5.700" connecting rods w/ 150,000 psi bolts
Hypereutectic pistons
Internal Front/ External Rear
Cylinder Heads:
- Vortec cast iron heads; 64cc chamber
Hardened retainers and springs
1.94 intake valves
1.50 exhaust valves
Cam Specs:
- Cam Type: Roller
.495 Intake .502 Exhaust
220 Intake / 224 Exhaust duration
@ .050 - 114 degree lobe separation
Using 1.5 rockers
Ignition Timing:
-
10-16 degrees initial, 32 -34 total
Also Includes:
- Valve covers
Oil pan
Thermostat, thermostat housing
Timing cover
Chrome air cleaner - Intake Manifold
- 600cfm carburetor
- HEI Distributor
- Spark plugs and wires
- Harmonic balancer
- Complete Front Accessory Drive with P/S. A/C, Alternator.
Warranty:
- 30 month / 50,000 mile
Notes:
- Recommended Oil For Your BluePrint Crate Engine: BPP710, BluePrint Engines break in oil
Not for EGR - Front pulley kit comes installed. Pulley kit does NOT fit Corvette.
WARNING: Cancer and Reproductive Harm-
www.P65Warnings.ca.gov
Customer Reviews
Your BluePrint engine was dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet.
Part Number: BP3501CTC1 / BP3501CTC1K
Fuel Delivery Type: Carbureted, 600 cfm
Spark Plug: AC Delco 41-993
Spark Plug Gap: .045"
Harmonic Balancer: Non Weighted - 8" diameter
Flexplate/Flywheel: Late 350 Weighted
Stall Converter: 1800-2200 rpm
Intake Manifold: Satin aluminum, Dual Plane, non-airgap
Fuel Recommendation: 87 Octane
Timing (Initial/Total Advance): Initial timing - 10-16° and Total timing 32-34°
Firing Order: 1,8,4,3,6,5,7,2
Recommended Break in Oil : BPP710 (Click Here)
Recommended Service Oil : BPP10W30 (Click Here)
Recommended Oil Filter ; BPP51061 (Click Here)
Total Oil capacity with production oil pan, and Correct BPP51061 Filter : 5 Quarts
R
Click here to download a copy of the Installation Guide that came with your BluePrint engine.