350CI Crate Engine | NEW BluePrint Block | Roller Cam | Small Block GM Style | Base Dressed Longblock

$4,499.00

This engine will be dyno tested before it ships to you at no additional charge (others charge $500)!

Part Number: BP3501CTC1 has been superseded to PN BP350CTCD Click here to view

Description:

HP & Torque: 365 HP / 405 FT LBS
Compression Ratio: 9.1:1
Cast Iron Heads
Roller Cam
Cast Steel Crank
Hypereutectic Pistons

Block:

NEW BluePrint Cast Iron Block
Manufactured and Machined in the USA!
4-Bolt Main
4.000" Bore
1-Piece Rear Main Seal
Mech fuel pump provision: Yes
Passenger Side Dipstick
Drilled and tapped for clutch linkage

Rotating Assembly:

Cast steel crankshaft
3.480" Stroke
OEM type 5.700" connecting rods
Hypereutectic pistons
Internal Front/ External Rear

Cylinder Heads:

Vortec cast iron heads; 64cc chamber
Hardened retainers and springs
1.94 intake valves
1.50 exhaust valves

Cam Specs:

Cam Type: Roller
.495 Intake .502 Exhaust
220 Intake / 224 Exhaust duration
@ .050 - 114 degree lobe separation
Using 1.5 rockers

Ignition Timing:

10-16 degrees initial, 32 -34 total

Also Includes:

Valve covers
Oil pan
Thermostat, thermostat housing
Timing cover
Chrome air cleaner
Intake Manifold
600cfm carburetor
HEI Distributor
Spark plugs and wires
Harmonic balancer

Warranty:

30 month / 50,000 mile

Notes:

Recommended Oil For Your BluePrint Crate Engine: BPP710, BluePrint Engines break in oil
Not for EGR
This engine is similar to BP3503CTC1, only features a BRAND NEW BPE Block!

Yellow Exclamation Triangle WARNING: Cancer and Reproductive Harm-
www.P65Warnings.ca.gov

SPECIFICATION

REVIEWS

RECOMMENDATIONS

This engine will be dyno tested before it ships to you at no additional charge (others charge $500)!

Part Number: BP3501CTC1 has been superseded to PN BP350CTCD Click here to view

Description:

HP & Torque: 365 HP / 405 FT LBS
Compression Ratio: 9.1:1
Cast Iron Heads
Roller Cam
Cast Steel Crank
Hypereutectic Pistons

Block:

NEW BluePrint Cast Iron Block
Manufactured and Machined in the USA!
4-Bolt Main
4.000" Bore
1-Piece Rear Main Seal
Mech fuel pump provision: Yes
Passenger Side Dipstick
Drilled and tapped for clutch linkage

Rotating Assembly:

Cast steel crankshaft
3.480" Stroke
OEM type 5.700" connecting rods
Hypereutectic pistons
Internal Front/ External Rear

Cylinder Heads:

Vortec cast iron heads; 64cc chamber
Hardened retainers and springs
1.94 intake valves
1.50 exhaust valves

Cam Specs:

Cam Type: Roller
.495 Intake .502 Exhaust
220 Intake / 224 Exhaust duration
@ .050 - 114 degree lobe separation
Using 1.5 rockers

Ignition Timing:

10-16 degrees initial, 32 -34 total

Also Includes:

Valve covers
Oil pan
Thermostat, thermostat housing
Timing cover
Chrome air cleaner
Intake Manifold
600cfm carburetor
HEI Distributor
Spark plugs and wires
Harmonic balancer

Warranty:

30 month / 50,000 mile

Notes:

Recommended Oil For Your BluePrint Crate Engine: BPP710, BluePrint Engines break in oil
Not for EGR
This engine is similar to BP3503CTC1, only features a BRAND NEW BPE Block!

Yellow Exclamation Triangle WARNING: Cancer and Reproductive Harm-
www.P65Warnings.ca.gov

Customer Reviews

No reviews yet Write a review

Your BluePrint engine was dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet.

Part Number: BP3501CTC1 / BP3501CTC1K

Fuel Delivery Type: Carbureted, 600 cfm

Spark Plug: AC Delco 41-993

Spark Plug Gap: .045"

Harmonic Balancer: Non Weighted - 8" diameter

Flexplate/Flywheel: Late 350 Weighted

Stall Converter: 1800-2200 rpm

Intake Manifold: Satin aluminum, Dual Plane, non-airgap

Fuel Recommendation: 87 Octane

Timing (Initial/Total Advance): Initial timing - 10-16° and Total timing 32-34°

Firing Order: 1,8,4,3,6,5,7,2

Recommended Break in Oil : BPP710 (Click Here)