BluePrint Engines 347CI Stroker Crate Engine | Small Block Ford Style | Base Dressed Longblock with Carburetor | Aluminum Heads | Roller Cam

$7,079.00

This engine will be dyno tested before it ships to you at no additional charge (others charge $500)!
Part #: BP3474CTC

Description:

HP & Torque: 415 HP / 415 FT LBS
Compression Ratio: 10.0:1
Aluminum Heads
Hydraulic Roller Cam
Cast Steel Crank
Forged Pistons

Block:

Hand picked seasoned block
Square and parallel decked
Align honed main bearing bore
Cylinders honed on computer controlled machine to within .0002 straightness and roundness
Cylinders are sonic tested for thickness
2-Bolt Main
4.000" Bored .040" Over
1-Piece Rear Main Seal
Mech fuel pump provision: Yes

Rotating Assembly:

New BluePrint Cast steel crankshaft
3.400" Stroke
Forged I-beam 5.400" connecting rods
Forged pistons
28oz External balance

Cylinder Heads:

BluePrint Aluminum Cylinder Heads -HP9008
60cc chamber
2.02" intake/1.60" exhaust valves
190cc intake/65cc exhaust runners

Cam Specs:

Cam Type: Roller
.543 Intake .554 Exhaust
218 Intake / 226 Exhaust duration
@ .050 - 112 degree lobe separation

Ignition Timing:

34 Degrees Total at 3500 RPM

Also Includes:

Dual plane, satin aluminum intake manifold
600cfm carburetor
Distributor
Valve covers
Painted oil pan
Dyno test results shipped with engine

Warranty:

30 month / 50,000 mile

Notes:

Not for use in pollution controlled vehicles.
Engine timing cover is designed for standard rotation water pump ONLY

SPECIFICATION

REVIEWS

RECOMMENDATIONS

This engine will be dyno tested before it ships to you at no additional charge (others charge $500)!
Part #: BP3474CTC

Description:

HP & Torque: 415 HP / 415 FT LBS
Compression Ratio: 10.0:1
Aluminum Heads
Hydraulic Roller Cam
Cast Steel Crank
Forged Pistons

Block:

Hand picked seasoned block
Square and parallel decked
Align honed main bearing bore
Cylinders honed on computer controlled machine to within .0002 straightness and roundness
Cylinders are sonic tested for thickness
2-Bolt Main
4.000" Bored .040" Over
1-Piece Rear Main Seal
Mech fuel pump provision: Yes

Rotating Assembly:

New BluePrint Cast steel crankshaft
3.400" Stroke
Forged I-beam 5.400" connecting rods
Forged pistons
28oz External balance

Cylinder Heads:

BluePrint Aluminum Cylinder Heads -HP9008
60cc chamber
2.02" intake/1.60" exhaust valves
190cc intake/65cc exhaust runners

Cam Specs:

Cam Type: Roller
.543 Intake .554 Exhaust
218 Intake / 226 Exhaust duration
@ .050 - 112 degree lobe separation

Ignition Timing:

34 Degrees Total at 3500 RPM

Also Includes:

Dual plane, satin aluminum intake manifold
600cfm carburetor
Distributor
Valve covers
Painted oil pan
Dyno test results shipped with engine

Warranty:

30 month / 50,000 mile

Notes:

Not for use in pollution controlled vehicles.
Engine timing cover is designed for standard rotation water pump ONLY

Customer Reviews

No reviews yet Write a review

Your BluePrint engine was dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet.

Part Number: BP3474CTC

Fuel Delivery Type: Carbureted, 600cfm, Electric choke

Spark Plug: BPP7938 (BKR5E/7938)

Spark Plug Gap: .035"

Harmonic Balancer: BPP28 - 28.4 Ounce, 6.4" Diameter

Flexplate/Flywheel: 28.4 Ounce Weighted

Stall Converter: 2000-2400 rpm

Intake Manifold: Dual plane, satin aluminum

Fuel Recommendation: 91 Octane

Timing (Initial/Total Advance): Initial timing - 10-16° and Total timing 32-34°

Firing Order: 1,3,7,2,6,5,4,8

Recommended Break in Oil : BPP710 (Click Here)