BluePrint Engines 347CI Stroker Crate Engine | Small Block Ford Style | Dressed Longblock with Carburetor | Iron Heads | Flat Tappet Cam

$4,320.00
This engine will be dyno tested before it ships to you at no additional charge (others charge $500)!
Part #: BP3472CTCS

 

Description: 

Dyno Tested Warranty
  • HP & Torque: 330 HP / 380 FT LBS
    Compression Ratio: 9.6:1
    Cast Iron Heads
    Flat Tappet Cam
    Cast Steel Crank
    Forged Pistons

Block:

  • Hand picked seasoned block
    Square and parallel decked
    Align honed main bearing bore
    Cylinders honed on computer controlled machine to within .0002 straightness and roundness
    Cylinders are sonic tested for thickness
    2-Bolt Main
    4.000" Bored .040" Over
    1-Piece Rear Main Seal
    Mech fuel pump provision: Yes
    s

Rotating Assembly:

  • New BluePrint Cast steel crankshaft
    3.400" Stroke
    Forged I-beam 5.400" connecting rods
    Forged pistons
    28oz External balance

Cylinder Heads:

  • Modified Ford cast iron heads
    Hardened retainers and springs
    1.94 swirl polished intake valves
    1.60 swirl polished exhaust valves
    Hardened push rods

Cam Specs:

  • Cam Type: Flat Tappet
    .496 Intake .520 Exhaust
    224 Intake / 234 Exhaust duration
    @ .050 - 110 degree lobe separation

Ignition Timing:

  • 34 Degrees Total at 3500 RPM

Also Includes:

  • Dual plane satin aluminum intake manifold
    600 cfm carburetor
    Distributor
    Valve covers
    Painted oil pan
    Brass freeze plugs
    Dyno tested and shipped with results

Warranty:

  • 30 month / 50,000 mile

Notes:

  • Not for use in pollution controlled vehicles.
  • Engine timing cover is designed for standard rotation water pump ONLY

Yellow Exclamation Triangle WARNING: Cancer and Reproductive Harm-
www.P65Warnings.ca.gov

This engine will be dyno tested before it ships to you at no additional charge (others charge $500)!
Part #: BP3472CTCS

 

Description: 

Dyno Tested Warranty
  • HP & Torque: 330 HP / 380 FT LBS
    Compression Ratio: 9.6:1
    Cast Iron Heads
    Flat Tappet Cam
    Cast Steel Crank
    Forged Pistons

Block:

  • Hand picked seasoned block
    Square and parallel decked
    Align honed main bearing bore
    Cylinders honed on computer controlled machine to within .0002 straightness and roundness
    Cylinders are sonic tested for thickness
    2-Bolt Main
    4.000" Bored .040" Over
    1-Piece Rear Main Seal
    Mech fuel pump provision: Yes
    s

Rotating Assembly:

  • New BluePrint Cast steel crankshaft
    3.400" Stroke
    Forged I-beam 5.400" connecting rods
    Forged pistons
    28oz External balance

Cylinder Heads:

  • Modified Ford cast iron heads
    Hardened retainers and springs
    1.94 swirl polished intake valves
    1.60 swirl polished exhaust valves
    Hardened push rods

Cam Specs:

  • Cam Type: Flat Tappet
    .496 Intake .520 Exhaust
    224 Intake / 234 Exhaust duration
    @ .050 - 110 degree lobe separation

Ignition Timing:

  • 34 Degrees Total at 3500 RPM

Also Includes:

  • Dual plane satin aluminum intake manifold
    600 cfm carburetor
    Distributor
    Valve covers
    Painted oil pan
    Brass freeze plugs
    Dyno tested and shipped with results

Warranty:

  • 30 month / 50,000 mile

Notes:

  • Not for use in pollution controlled vehicles.
  • Engine timing cover is designed for standard rotation water pump ONLY

Yellow Exclamation Triangle WARNING: Cancer and Reproductive Harm-
www.P65Warnings.ca.gov

Your BluePrint engine was dyno tested with the parts and specifications listed below.  If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet.

 

Part Number: BP3472CTCS

Fuel Delivery Type: Carbureted, 600cfm, Electric choke

Spark Plug: NGK 2817

Spark Plug Gap: .045"

Harmonic Balancer: BPP28 - 28.4 Ounce, 6.4" Diameter

Flexplate/Flywheel: 28.4 Ounce Weighted

Stall Converter: 1800-2200 rpm

Intake Manifold: Dual plane, satin aluminum

Fuel Recommendation: 91 Octane

Timing (Initial/Total Advance): Initial timing - 10-16° and Total timing 32-34°

Firing Order: 1,3,7,2,6,5,4,8

Notes: Zinc Additive Required For Flat Tappet Application, Recommended Oil For Your BluePrint Crate Engine: 10W30, Non-Synthetic. Not For EGR

 

Click here to download a copy of the Installation Guide that came with your BluePrint engine.

Check Out This Product and More On Our Pinterest Page