BluePrint Engines 350CI Crate Engine | Small Block GM Style | Dressed Longblock with Carburetor | Iron Heads | Flat Tappet Cam | with Pulley Kit

$4,999.00
This engine will be dyno tested before it ships to you at no additional charge (others charge $500)!
Part # BP3501CTC1K

Description

Dyno Tested Warranty
  • HP & Torque: 365 HP / 405 FT LBS
    Compression Ratio: 9.1:1
    Cast Iron Heads
    Flat Tappet Cam
    Cast Steel Crank
    Hypereutectic Pistons

Block

  • Hand picked seasoned block
    Square and parallel decked
    Align honed main bearing bore
    Cylinders honed on computer controlled machine to within .0002 straightness and roundness
    Cylinders are sonic tested for thickness
    4-Bolt Main
    4.000" Bored .040" Over
    1-Piece Rear Main Seal
    Mech fuel pump provision: Yes
    Passenger Side Dipstick Drilled and tapped for clutch linkage

Rotating Assembly:

  • Cast steel crankshaft
    3.480" Stroke
    OEM type 5.700" connecting rods w/ 150,000 psi bolts
    Hypereutectic pistons
    Internal Front/ External Rear

    Cylinder Heads:

    • Vortec cast iron cylinder heads
      1.25 diameter valve springs
      Hardened retainers and springs
      2.02 swirl polished intake valves
      1.60 swirl polished exhaust valves
      1.5 long slot, stamped steel rockers
      Hardened push rods

      Cam Specs:

      • Flat Tappet Cam
        .480 Intake / .486 Exhaust
        224 Intake / 230 Exhaust Duration
        @ .050 - 110 Degree Lobe Separation
        Using 1.5 rockers

      Ignition Timing:

      • 10-16 degrees initial, 32-34 total

      Also Includes:

      • Satin aluminum dual-plane intake manifold
        600cfm carburetor
        HEI distributor
        Harmonic balancer
        Serpentine front drive pulley system
        Fuel pump & braided line
        Water pump
        Alternator
        Power steering pump
        AC compressor
        Flexplate
        Thermostat & housing
        Plug wires
        Spark plugs
        Chrome steel valve covers
        Timing cover
        Oil pan
        Brass freeze plugs
        Dyno test results shipped with engine

        Warranty:

        • 30 month / 50,000 mile

        Notes:

        • Recommended Oil For Your BluePrint Crate Engine: BPP710 BluePrint Engines break-in oil
          Not For EGR

          Yellow Exclamation Triangle WARNING: Cancer and Reproductive Harm-
          www.P65Warnings.ca.gov

          This engine will be dyno tested before it ships to you at no additional charge (others charge $500)!
          Part # BP3501CTC1K

          Description

          Dyno Tested Warranty
          • HP & Torque: 365 HP / 405 FT LBS
            Compression Ratio: 9.1:1
            Cast Iron Heads
            Flat Tappet Cam
            Cast Steel Crank
            Hypereutectic Pistons

          Block

          • Hand picked seasoned block
            Square and parallel decked
            Align honed main bearing bore
            Cylinders honed on computer controlled machine to within .0002 straightness and roundness
            Cylinders are sonic tested for thickness
            4-Bolt Main
            4.000" Bored .040" Over
            1-Piece Rear Main Seal
            Mech fuel pump provision: Yes
            Passenger Side Dipstick Drilled and tapped for clutch linkage

          Rotating Assembly:

          • Cast steel crankshaft
            3.480" Stroke
            OEM type 5.700" connecting rods w/ 150,000 psi bolts
            Hypereutectic pistons
            Internal Front/ External Rear

            Cylinder Heads:

            • Vortec cast iron cylinder heads
              1.25 diameter valve springs
              Hardened retainers and springs
              2.02 swirl polished intake valves
              1.60 swirl polished exhaust valves
              1.5 long slot, stamped steel rockers
              Hardened push rods

              Cam Specs:

              • Flat Tappet Cam
                .480 Intake / .486 Exhaust
                224 Intake / 230 Exhaust Duration
                @ .050 - 110 Degree Lobe Separation
                Using 1.5 rockers

              Ignition Timing:

              • 10-16 degrees initial, 32-34 total

              Also Includes:

              • Satin aluminum dual-plane intake manifold
                600cfm carburetor
                HEI distributor
                Harmonic balancer
                Serpentine front drive pulley system
                Fuel pump & braided line
                Water pump
                Alternator
                Power steering pump
                AC compressor
                Flexplate
                Thermostat & housing
                Plug wires
                Spark plugs
                Chrome steel valve covers
                Timing cover
                Oil pan
                Brass freeze plugs
                Dyno test results shipped with engine

                Warranty:

                • 30 month / 50,000 mile

                Notes:

                • Recommended Oil For Your BluePrint Crate Engine: BPP710 BluePrint Engines break-in oil
                  Not For EGR

                  Yellow Exclamation Triangle WARNING: Cancer and Reproductive Harm-
                  www.P65Warnings.ca.gov

                  Your BluePrint engine was dyno tested with the parts and specifications listed below.  If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet.

                   

                  Part Number: BP3501CTC1K

                  Fuel Delivery Type: Carbureted, 600 cfm

                  Spark Plug: AC Delco 41-993

                  Spark Plug Gap: .045"

                  Harmonic Balancer: Non Weighted - 8" diameter

                  Flexplate/Flywheel: Late 350 Weighted

                  Stall Converter: 1800-2200 rpm

                  Intake Manifold: Satin aluminum, Dual Plane, non-airgap

                  Fuel Recommendation: 87 Octane

                  Timing (Initial/Total Advance): Initial timing - 10-16° and Total timing 32-34°

                  Firing Order: 1,8,4,3,6,5,7,2

                  Notes: Recommended Break In Oil For Your BluePrint Crate Engine: BPP710, Not for EGR

                   

                  Click here to download a copy of the Installation Guide that came with your BluePrint engine.

                  Check Out This Product and More On Our Pinterest Page