BluePrint Engines 302CI Crate Engine | Small Block Ford Style | Dressed Longblock with Carburetor | Iron Heads | Flat Tappet Cam

$3,299.00
This engine will be dyno tested before it ships to you at no additional charge (others charge $500)!
Part #: BP3023CTC

Description

Dyno Tested Warranty
  • HP & Torque: 235 HP / 317 FT LBS
    Compression Ratio: 8.5:1
    Cast Iron Heads
    Flat Tappet Cam
    Cast Steel Crank
    Hypereutectic Pistons

Block:

  • Hand picked seasoned block
    Square and parallel decked
    Align honed main bearing bore
    Cylinders honed on computer controlled machine to within .0002 straightness and roundness
    Cylinders are sonic tested for thickness
    2-Bolt Main
    4.000" Bored .040" Over
    1-Piece Rear Main Seal
    Mech fuel pump provision: Yes

Rotating Assembly:

  • Ford, machined and balanced by BluePrint Engines
    3.000" Stroke
    OEM type 5.090" connecting rods
    Hypereutectic pistons
    50oz External balance

Cylinder Heads:

  • Cast Iron
    Hardened retainers and springs
    1.94 swirl polished intake valves
    1.60 swirl polished exhaust valves

Cam Specs:

  • Cam Type: Flat tappet
    .376 Intake .389 Exhaust
    184 Intake / 191 Exhaust duration
    @ .050 - 112 degree lobe separation

Ignition Timing:

  • Initial timing - 12 ° and Total timing 32 °

Also Includes:

  • Carb
    Intake dual plane
    Harmonic balancer
    Chrome valve covers
    Chrome timing cover
    Distributor
    Water pump
    Fuel pump
    Spark plug wires
    Spark plugs
    Painted oil pan
    Brass freeze plugs
    Dyno test results shipped with engine

    Warranty:

    • 30 month / 50,000 mile

    Notes:

    • Not for use in pollution controlled vehicles.

    • Engine timing cover is designed for standard rotation water pump ONLY

    Yellow Exclamation Triangle WARNING: Cancer and Reproductive Harm-
    www.P65Warnings.ca.gov

    This engine will be dyno tested before it ships to you at no additional charge (others charge $500)!
    Part #: BP3023CTC

    Description

    Dyno Tested Warranty
    • HP & Torque: 235 HP / 317 FT LBS
      Compression Ratio: 8.5:1
      Cast Iron Heads
      Flat Tappet Cam
      Cast Steel Crank
      Hypereutectic Pistons

    Block:

    • Hand picked seasoned block
      Square and parallel decked
      Align honed main bearing bore
      Cylinders honed on computer controlled machine to within .0002 straightness and roundness
      Cylinders are sonic tested for thickness
      2-Bolt Main
      4.000" Bored .040" Over
      1-Piece Rear Main Seal
      Mech fuel pump provision: Yes

    Rotating Assembly:

    • Ford, machined and balanced by BluePrint Engines
      3.000" Stroke
      OEM type 5.090" connecting rods
      Hypereutectic pistons
      50oz External balance

    Cylinder Heads:

    • Cast Iron
      Hardened retainers and springs
      1.94 swirl polished intake valves
      1.60 swirl polished exhaust valves

    Cam Specs:

    • Cam Type: Flat tappet
      .376 Intake .389 Exhaust
      184 Intake / 191 Exhaust duration
      @ .050 - 112 degree lobe separation

    Ignition Timing:

    • Initial timing - 12 ° and Total timing 32 °

    Also Includes:

    • Carb
      Intake dual plane
      Harmonic balancer
      Chrome valve covers
      Chrome timing cover
      Distributor
      Water pump
      Fuel pump
      Spark plug wires
      Spark plugs
      Painted oil pan
      Brass freeze plugs
      Dyno test results shipped with engine

      Warranty:

      • 30 month / 50,000 mile

      Notes:

      • Not for use in pollution controlled vehicles.

      • Engine timing cover is designed for standard rotation water pump ONLY

      Yellow Exclamation Triangle WARNING: Cancer and Reproductive Harm-
      www.P65Warnings.ca.gov

      Your BluePrint engine was dyno tested with the parts and specifications listed below.  If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet.

       

      Part Number: BP3023CTC

      Fuel Delivery Type: Carbureted

      Spark Plug: Champion 406

      Spark Plug Gap: .040"

      Harmonic Balancer: BPP50 - 50 Ounce, 6.4" Diameter

      Flexplate/Flywheel: 50oz Externally balanced

      Stall Converter: Stock

      Intake Manifold: Dual plane satin aluminium

      Fuel Recommendation: 87 Octane

      Timing (Initial/Total Advance): Initial timing - 12° and Total timing 32°

      Firing Order: 1,5,4,2,6,3,7,8

      Notes: Recommended break in oil for your BluePrint Crate Engine: BPP710, Not for EGR

       

      Click here to download a copy of the Installation Guide that came with your BluePrint engine.

      Check Out This Product and More On Our Pinterest Page