BluePrint Engines 383CI Stroker Crate Engine | Small Block GM Style | Longblock | Aluminum Heads | Roller Cam | Power Adder Ready

$6,030.00
Part #: BP38316CT1

Description

  • HP & Torque: 440 HP / 445 FT LBS
    Compression Ratio: 8.5:1
    Forged Pistons
    Forged Crank

Block:

  • 4 Bolt main
    1 piece rear main seal 
    Passenger side dipstick 
    Align honed main bearing bore 
    Cylinders honed on computer controlled machine to within .0002 straightness and roundness 
    Cylinders are sonic tested for thicknessk

Rotating Assembly:

  • New forged crankshaft
    3.75" stroke Forged pistons 
    Forged rods with 150,000 PSI bolts
    Hastings moly rings 
    Melling high volume oil pump 
    Hydraulic roller cam 
    Heavy duty double roller timing set

Cylinder Heads:

  • BluePrint Performance aluminium
    Hardened retainers and springs
    2.02 swirl polished intake valves
    1.60 swirl polished exhaust valves
    BP Aluminum Part# H8002K

Cam Specs:

  • Roller, .536 Intake
    .555 Exhaust
    224 Intake / 236 Exhaust duration @ .050
    113 degree lobe separation

Ignition Timing:

  • 34 degrees total (at 3500 RPM)

Also Includes:

  • New valve covers 
    Oil pan and timing cover 
    Brass freeze plugs 
    Dyno tested - shipped with results

Warranty:

  • 30 month / 50,000 mile

Notes:

  • This engine requires a non-weighted 8" harmonic balancer, and late 350ci weighted flexplate/flywheel.

    Please see Recommended Add On's page for additional parts.

    **Engine was designed as a Power Adder.

    The HP and Torque numbers came from us dyno testing with a 750cfm carb

    *A bronze distributor gear is NOT recommended on this engine

    Not for use in pollution controlled vehicles.

Part #: BP38316CT1

Description

  • HP & Torque: 440 HP / 445 FT LBS
    Compression Ratio: 8.5:1
    Forged Pistons
    Forged Crank

Block:

  • 4 Bolt main
    1 piece rear main seal 
    Passenger side dipstick 
    Align honed main bearing bore 
    Cylinders honed on computer controlled machine to within .0002 straightness and roundness 
    Cylinders are sonic tested for thicknessk

Rotating Assembly:

  • New forged crankshaft
    3.75" stroke Forged pistons 
    Forged rods with 150,000 PSI bolts
    Hastings moly rings 
    Melling high volume oil pump 
    Hydraulic roller cam 
    Heavy duty double roller timing set

Cylinder Heads:

  • BluePrint Performance aluminium
    Hardened retainers and springs
    2.02 swirl polished intake valves
    1.60 swirl polished exhaust valves
    BP Aluminum Part# H8002K

Cam Specs:

  • Roller, .536 Intake
    .555 Exhaust
    224 Intake / 236 Exhaust duration @ .050
    113 degree lobe separation

Ignition Timing:

  • 34 degrees total (at 3500 RPM)

Also Includes:

  • New valve covers 
    Oil pan and timing cover 
    Brass freeze plugs 
    Dyno tested - shipped with results

Warranty:

  • 30 month / 50,000 mile

Notes:

  • This engine requires a non-weighted 8" harmonic balancer, and late 350ci weighted flexplate/flywheel.

    Please see Recommended Add On's page for additional parts.

    **Engine was designed as a Power Adder.

    The HP and Torque numbers came from us dyno testing with a 750cfm carb

    *A bronze distributor gear is NOT recommended on this engine

    Not for use in pollution controlled vehicles.

BluePrint Engines Add-On Recommendations & Specifications for Part Number: BP38316CT1 (GM 383ci Stroker Crate Engine | Longblock | Aluminum Heads | Roller Cam | Power Adder Ready)

 

Your BluePrint engine was dyno tested with the parts and specifications listed below.  If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet.

 

Part Number: BP38316CT1

Fuel Delivery Type: Carbureted

Spark Plug: AC Delco 41-629

Spark Plug Gap: .045"

Harmonic Balancer: BPP350 - Non Weighted, 8" diameter

Flexplate/Flywheel: Late 350 Weighted

Stall Converter: 2000-2400 rpm

Intake Manifold: N/A - 1986-EARLIER BOLT PATTERN

Fuel Recommendation: 91 Octane

Timing (Initial/Total Advance): Initial timing - 10-16° and Total timing 32-34°

Firing Order: 1,8,4,3,6,5,7,2

Notes: Power Adder engine. If a double keyway crank is required, the engine wil have to be special built. Recommended break in oil for your BluePrint Crate Engine: BPP710, Not for EGR

 

Click here to download a copy of the Installation Guide that came with your BluePrint engine.

Check Out This Product and More On Our Pinterest Page