BluePrint Engines 383CI Stroker Crate Engine | Small Block GM Style | Dressed Longblock with Carburetor | Aluminum Heads | Flat Tappet Cam

$4,450.00
This engine will be dyno tested before it ships to you at no additional charge (others charge $500)!
Part #: BP3834CTC1

Description

Dyno Tested Warranty
  • HP & Torque: 420 HP / 440 FT LBS
    Compression Ratio: 10.0:1
    Aluminum Heads
    Flat Tappet Cam
    Cast Steel Crank
    Hypereutectic Pistons

Block:

  • Hand picked seasoned block
    Square and parallel decked
    Align honed main bearing bore
    Cylinders honed on computer controlled machine to within .0002 straightness and roundness
    Cylinders are sonic tested for thickness
    4-Bolt Main
    4.000" Bored .040" Over
    1-Piece Rear Main Seal
    Mech fuel pump provision: Yes
    Passenger Side Dipstick
    Drilled and tapped for clutch linkage

Rotating Assembly:

  • New BluePrint Cast steel crankshaft
    3.750" Stroke
    OEM type 5.700" connecting rods w/ 150,000 psi bolts
    Hypereutectic pistons
    External Front/ External Rear

Cylinder Heads:

  • BluePrint Aluminum Cylinder Heads - H8002K
    64cc chamber
    2.02" intake/1.60" exhaust valves
    195cc intake/75cc exhaust runners

Cam Specs:

  • Cam Type: Flat Tappet
    .480 Intake .486 Exhaust
    229 Intake / 230 Exhaust duration
    @ .050

Ignition Timing:

  • 34 degrees total at 3500 RPM

Also Includes:

  • New valve covers, oil pan and timing cover
    Aluminum Intake Manifold
    HEI distributor
    750cfm Carburetor
    Brass freeze plugs
    Dyno test results shipped with engine

Warranty:

  • 30 month / 50,000 mile

Notes:

  • Picture shown with optional tall, perimeter bolt valve covers.
    Recommended spark plugs are Champion 792 with .045"" gap
    Not for use in pollution controlled vehicles.

    Yellow Exclamation Triangle WARNING: Cancer and Reproductive Harm-
    www.P65Warnings.ca.gov

    This engine will be dyno tested before it ships to you at no additional charge (others charge $500)!
    Part #: BP3834CTC1

    Description

    Dyno Tested Warranty
    • HP & Torque: 420 HP / 440 FT LBS
      Compression Ratio: 10.0:1
      Aluminum Heads
      Flat Tappet Cam
      Cast Steel Crank
      Hypereutectic Pistons

    Block:

    • Hand picked seasoned block
      Square and parallel decked
      Align honed main bearing bore
      Cylinders honed on computer controlled machine to within .0002 straightness and roundness
      Cylinders are sonic tested for thickness
      4-Bolt Main
      4.000" Bored .040" Over
      1-Piece Rear Main Seal
      Mech fuel pump provision: Yes
      Passenger Side Dipstick
      Drilled and tapped for clutch linkage

    Rotating Assembly:

    • New BluePrint Cast steel crankshaft
      3.750" Stroke
      OEM type 5.700" connecting rods w/ 150,000 psi bolts
      Hypereutectic pistons
      External Front/ External Rear

    Cylinder Heads:

    • BluePrint Aluminum Cylinder Heads - H8002K
      64cc chamber
      2.02" intake/1.60" exhaust valves
      195cc intake/75cc exhaust runners

    Cam Specs:

    • Cam Type: Flat Tappet
      .480 Intake .486 Exhaust
      229 Intake / 230 Exhaust duration
      @ .050

    Ignition Timing:

    • 34 degrees total at 3500 RPM

    Also Includes:

    • New valve covers, oil pan and timing cover
      Aluminum Intake Manifold
      HEI distributor
      750cfm Carburetor
      Brass freeze plugs
      Dyno test results shipped with engine

    Warranty:

    • 30 month / 50,000 mile

    Notes:

    • Picture shown with optional tall, perimeter bolt valve covers.
      Recommended spark plugs are Champion 792 with .045"" gap
      Not for use in pollution controlled vehicles.

      Yellow Exclamation Triangle WARNING: Cancer and Reproductive Harm-
      www.P65Warnings.ca.gov

      Customer Reviews

      Based on 1 review Write a review

      Your BluePrint engine was dyno tested with the parts and specifications listed below.  If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet.

       

      Part Number: BP3834CTC1

      Fuel Delivery Type: Carbureted, 750cfm, manual choke

      Spark Plug: Champion 792

      Spark Plug Gap: .045"

      Harmonic Balancer: BPP400 - 400 ci weighed, 8" diameter

      Flexplate/Flywheel: Late 350 Weighted

      Stall Converter: 2000-2400 rpm

      Intake Manifold: Dual plane, satin aluminum

      Fuel Recommendation: 91 Octane

      Timing (Initial/Total Advance): Initial timing - 10-16° and Total timing 32-34°

      Firing Order: 1,8,4,3,6,5,7,2

      Notes: Recommended break in oil for your BluePrint Crate Engine:BPP710, Not for EGR

       

      Click here to download a copy of the Installation Guide that came with your BluePrint engine.

      Check Out This Product and More On Our Pinterest Page